Used Hilma Vise 5243 for sale (563)

Condition: used, Mechanical machine vice RÖHM type 711-03 Jaw width: 120 mm Pedpfx Asy E T A Nol Sjpr Jaw height: 45 mm Clamping range: 0-115 mm Maximum opening: 117 mm Guideway height: 64 mm Dimensions (L x W x H): 400 x 200 x 110 mm Net weight: 24 kg Good condition

Condition: used, mileage: 148,050 km, power: 103 kW (140.04 HP), first registration: 12/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 7551X ----Why autonext GmbH?---- One of the largest commercial vehicle exhibitions in Germany Always over 400 vehicles available immediately at Largest selection - Best price More than 1,000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition---- One owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen Next service due in 160 days New brakes front and rear As-new all-weather tires on the rear axle Workshop conversion "Sortimo" incl. vise Tow bar, increased towing capacity 3,000 kg Audio system Composition Audio (radio, SD card slot, MP3 playback functionality) Parking sensors front and rear Climatic air conditioning Auxiliary heater Marker lights Driver’s seat Comfort Plus Double passenger seat with storage compartment and foldable backrest as table Ppjdpfoylf H Ssx Al Sjr ----Special equipment:---- * Storage package 2 * Storage: 2 DIN slot front under headliner * Interior lighting in cab: Front reading lamp * Trailer coupling: Fixed ball head * Trailer stabilization program * Audio system Composition Audio (radio, SD card slot, MP3 playback functionality) * Bluetooth mobile phone interface * Second battery * Driver and passenger airbags, passenger airbag deactivatable * Electrically adjustable and heated exterior mirrors * Driver assistance system: Parking sensors front and rear * Window in cargo/passenger area: Fixed, front right * Rear wing doors with glazing * Climatic air conditioning (cab) * Cargo area partition with window * Side marker lights * Rotating warning beacons (2) front and rear * Hinges for rear doors with extended opening angle * Seats in cab: Double passenger seat with storage/compartment and backrest foldable as table * Seats in cab: Driver’s seat Comfort Plus * Power sockets (12V connection) in cargo/passenger area (2 units) * Entry step rear right * Additional heater (hot water) with auxiliary heating function and remote control ----Standard equipment:---- Anti-lock braking system (ABS), Drive type: front-wheel drive, exterior mirror convex left, exterior mirror convex right, LED indicators integrated in exterior mirrors, cab flooring: rubber, on-board tools, underbody aerodynamic cover, twin headlights, entry handle on rear left C-pillar, entry handle on rear right C-pillar, electronic stability program (ESP), driver assistance system: hill start assist, driver assistance system: brake assist (HBA), driver assistance system: crosswind assist, electric window lifters front, laminated glass windscreen, 6-speed transmission, grab handles A-pillars, interior lighting in cab: LED, interior lighting in cargo/passenger area: LED, Body/superstructure: standard high roof van, body variant: high roof in vehicle color, fuel tank: 75L, radiator grille with chrome trim at top, adjustable steering column (steering wheel), headlight range adjustment, truck registration, engine 2.0L – 103 kW TDI, rear fog lamp, wheelbase 3640 mm, tire repair kit, soot particle filter, Euro 6 emissions standard, sliding door cargo/passenger compartment right, SCR system (AdBlue technology), electro-mechanical power steering, seat cover/upholstery: fabric, start/stop system engine, power sockets (12V connection) in cab (2 units), front bumper in grey with trim in vehicle color, daytime running lights, lashing eyes

Condition: like new (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 60 Nm, controller manufacturer: Siemens, controller model: 840D SL, total height: 2,390 mm, total length: 2,515 mm, total width: 1,700 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, number of slots in tool magazine: 24, tool length: 200 mm, tool diameter: 80 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine Spinner VC450 from 2014 in very well-maintained condition. Highlight: The machine is equipped with a new spindle with only approx. 30 spindle hours (no crash), professionally installed by the manufacturer Spinner – technically in excellent condition. Ppsdpfxsy Hf Nqj Al Ssr Used Tested and fully functional Ideal for precision machining – ready for immediate operation. ➡️ Additionally available: A comprehensive range of accessories can also be purchased, including machine vises, SK40 tool holders, and other equipment. Inspection and test run possible by appointment. If interested, please get in touch.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. Podsfg E H Ispfx Al Sjpr CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: excellent (used), mileage: 223,714 km, power: 132 kW (179.47 HP), first registration: 01/2020, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: air, number of seats: 2, total length: 7,670 mm, total width: 2,320 mm, total height: 3,100 mm, permissible axle load (axle 1): 2,500 kg, permissible axle load (axle 2): 5,350 kg, loading space length: 5,240 mm, loading space width: 2,240 mm, loading space height: 2,090 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, power mirror, sliding door, tail-lift, traction control, General information Number of doors: 3 Cab: single Registration number: 77-BPF-4 Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Transmission Transmission: HI-MATIC, 8 gears, Automatic Axle configuration Tyre size: 225/75R16 Brakes: disc brakes Front axle: Max. axle load: 2500 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 5350 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Suspension: air suspension Weights Empty weight: 3.865 kg Carrying capacity: 3.135 kg GVW: 7.000 kg Functional Tail lift: DHOLLANDIA DHLM.15, tail lift, 1000 kg Make of bodywork: LAMBOO Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Camera 360 degree - Climate control - Heated door mirrors Ppjdjy Dt I Nopfx Al Ser - Lane assist - Multifunctional Steering Wheel - Passenger seat - Radio/Cd/Audio system - Reversing camera - Side door - Tachograph - Twin wheel axle = Remarks = VIDEO: Very beautiful and neat Iveco Daily 70C18 3.0 D 180hp Euro 6D Hi-Matic 8-speed automatic GVW 7000 KG ( Driving license C1 / C ) Payload 3175 kg Internal dimensions Cargo space L. 5243 mm / W. 2236 mm / H. 2093 mm Electric sliding door 223000 KM Fully dealer maintained Technically and visually in very good condition

Condition: not inspected (used), functionality: unexamined, overall weight: 50 kg, total height: 100 mm, jaw width: 145 mm, total length: 530 mm, total width: 270 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Jaw width: 145 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 530 x 270 x 100 mm Weight: 50 kg Podpfoy D Scfjx Al Sepr External reference: 14

Condition: used, mileage: 83,050 km, power: 130 kW (176.75 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 6241X ----Why autonext GmbH?---- One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available at any time. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition!---- Ppedewz A Eljpfx Al Sor 1st owner, German vehicle, non-smoking vehicle Full service history exclusively at Volkswagen Next service due in 121 days New front brakes Body: Glass transporter with roof rack Workshop integration including bench vise Parking sensors front and rear Cruise control Tow bar, increased towing capacity 2,500kg Fitted with 8 tires: - Summer tires - Winter tires on steel rims ----Special Equipment:---- * Storage Package 2 * Storage: 2 DIN slot front under roof lining * Interior lighting in cab: reading light front * Tow bar: fixed ball head * Trailer Stability Program * Audio system Composition Audio (radio, SD-card interface, MP3 playback functionality) * Mobile phone interface Bluetooth * Driver Assistance Package 1 * Cruise control system including speed limiter * Driver assistance system: fatigue detection sensor * Multifunction steering wheel * Driver assistance system: lane keeping assist (Lane Assist) * Driver assistance system: area monitoring system (Front Assist) with city emergency brake function * Driver assistance system: city emergency brake function * Spare wheel as road wheel incl. vehicle tools and jack * Vehicle tools and jack * Airbag driver/passenger side, passenger airbag can be deactivated * Dashboard with additional console * Wood flooring in cargo area * Driver assistance system: parking sensors front and rear * Suspension: shock absorbers and stabilisers reinforced, front and rear * Vehicle without model designation * Climatic air conditioning (driver’s cab) * Side marker lights * Smoker package * Seats in cab: passenger double seat with storage compartment and folding backrest to serve as an accessory table * Seats in cab: Comfort Plus driver’s seat * Step at rear right Standard Equipment: Anti-lock braking system (ABS), drive type: front-wheel drive, exterior mirror convex left, exterior mirror convex right, LED turn signals integrated in exterior mirrors, rubber flooring in driver's cab, underbody drag coefficient panel, twin headlamps, entry grab handle at rear left door pillar, entry grab handle at rear right door pillar, electronic stability program (ESP), driver assistance system: hill start assist, brake assistant (HBA), crosswind assist, electric front windows, laminated windshield, 6-speed gearbox, A-pillar grab handles, rear wing doors without glazing, LED interior lighting in driver's cab, LED interior lights in load/passenger compartment, body/superstructure: high-roof van, body variant: high roof in body color, 75-litre fuel tank, radiator grille with chrome trim at top, full-height bulkhead without window, adjustable steering column (steering wheel), headlight range adjustment, truck registration, engine 2.0 L – 130 kW TDI, multifunction display Plus, rear fog lamp, wheelbase 3640 mm, tire repair kit, diesel particulate filter, low-emission to Euro 6 standard, right sliding door to load/passenger compartment, SCR system (AdBlue technology), electro-mechanical power steering, seat covers/upholstery: fabric, start/stop engine system, power socket.

Condition: excellent (used), functionality: fully functional, Promat Hexagonal Workbench Dimensions: 2340x2700x850 mm Solid beech RAL 7035 light grey RAL 5010 gentian blue Ppjdpox Aqr Hefx Al Sor Drawing holder – top section – holder The underbench drawer cabinets beneath the group workbench are lockable, one lock is defective. Cover panels between the plinth cabinets of the hexagonal workbench. Multiple vises are mounted on the multi-user workbench. LEINEN Junior parallel vise with handwheel Jaw width: 125 mm, mechanical-hydraulic clamping Robust Junior vise made of high-strength cast iron Maximum clamping accuracy of machine vice thanks to long, precise dovetail guide Hardened steel jaws, integrated pipe jaws Price: €3,150,-- net ex location plus packaging costs All technical specifications are given without liability for typographical errors/mistakes. Sale only within EU countries.

Condition: used, Band saw, Behringer Band saw, Behringer HBP 220, Used machine Manufacturer: Behringer Type: HBP220 Year of manufacture: 1995 Inclusion dimensions: 2400 x 1800 x 1500 mm Weight: ~1300 kg Cutting range: 350 x 220 mm Ø: 220 mm - Hydraulic vise - Chip conveyor Pjdpfx Asy Hpf Ajl Sspr Works perfectly, two-handed start

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele Ppodpfx Asy Dc I Sol Ser • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: ready for operation (used), Year of construction: 2019, Laminating press manufactured in 1998. This Bürkle EKMH 1300 features a working width of 1300 mm and is equipped with a new Siemens SIMATIC KMG Touch control system. It includes a Bürkle GLK calender, film holder, saw for trimming excess material, and two GWK temperature control units. If you are looking to get high-quality laminating capabilities, consider the Bürkle EKMH 1300 laminating press we have for sale. Contact us for further details regarding this machine. • Condition: Used line(s), not rebuilt, without warranty • Costa wide-belt sanding machines, type KK7 CT CT 1350 (2018) • From-below sander: contact roller, electronic shoe sanding unit, cleaning brush, intermediate conveyor belt approx. 3000 mm • From-above sander: identical equipment • IMA double-end profiler, type FBA/II/740/A (2018) • Scoring saw (bottom), splitter, flazer, prism cutter, joining cutter, cross-edge milling unit, 3 profiling milling units, brushes • Bürkle glue applicator, type DAK1300 (1992) • Bürkle laminating machine, type EKMH 1300 (1998) • New Siemens SIMATIC KMG Touch control system, Bürkle GLK calender • Film holder and trimming saw • Working width 1300 mm Podpfx Aoy Dr Hqjl Sopr • Homag postforming machine • 2 saw units (horizontal and vertical) • 2 identically configured processing sides with gluing • Pressure zone with turret magazine for various profiles • Various milling units and buffing brushes • IMA panel processing and edge-banding line, type Combima 17/52/R75/3580:950 (2018) • Equipped with 50 processing units • Workpiece cleaning at the end • Kraft machining center • Kraft automatic hardware insertion machine for doors, type CTF91 (2006) • Automatic drilling machine for door hinges with milling units for lock cases and door handles • Untha shredder, type RS30 (2021) • Power 22 kW, operating hours 155 h Additional equipment • Handling, feeding, transport, buffers • Kraft gantry feeder (2019): vacuum lift, 2 feed roller conveyors, 1 transport roller conveyor • Kraft roller conveyor system (2019): 3 individual elements, centering station • Feed conveyor and alignment station for the IMA double-end profiler • Kraft feed conveyor belt for laminating system (2019) • Kraft infeed table for laminating machine (2019) • Unloading conveyor belt (laminating section) • Conveyor and buffer system (Kraft, 2018): approx. 43 m powered roller conveyor, roller width approx. 1000 mm, 3 automatic cross-feed carriages • Gantry feeding with rotating vacuum gantry (for IMA Combima line) • Gantry system for destacking onto 3 different roller conveyors (for IMA Combima line) • Kraft portal destacking: vacuum portal with 3 destacking stations • Kraft automatic cross-transport cart (2018): roll width approx. 1400 mm, roll length approx. 2800 mm • Conveyor belt with inspection system: swivel arm with vacuum suction cup; visual inspection station • Intermediate buffer with 4 levels and infeed to the postforming machine • Infeed table to the postforming machine • Gantry loading with vacuum loader (for the machining center) • Process auxiliaries • Glue melting unit GWK Eco 03A • PU pre-melting units Nordson / VersaBlue (built 2020 and 2004) • 2 GWK temperature control units • 2 cooling units BEKO Bekoblizz LC (built 2020) • Steel platform with stairs and various pumps (for glue applicator) • Extraction, cleaning, shop equipment • Schuko mobile extraction unit, type ObiS3 (2015), 2.2 kW • Nilfisk Attix industrial vacuum cleaner • FORMAT workshop cart: 6 drawers, 1 hinged door, vise

Condition: used, functionality: fully functional, LOT OF MACHINE VISES Psdox A El Ispfx Al Sspr

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Pjdpfxoy E Hk Hs Al Sspr Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: used, Year of construction: 2007, saw blade diameter: 350 mm, Blade tilt -45° / +45°. Maximum vise opening 180 mm. Maximum length 385 mm. Blade diameter 350 mm. Blade rotation speed 1700 / 3400 rpm – 2 speeds. Ppodpfx Aleywvrqo Ser The machine comes from a factory closure. After switching on, all axes function, the machine calibrates, and the blade operates at two speeds. I am not familiar with its programming, therefore the automatic cutting function has not been tested. The set includes several additional blades for different materials. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is located 120 km from Kraków Airport (KRK). Transport possible. Export price.

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Podpeycqhcjfx Al Sjpr Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations Pjdpfoy A Ip Eox Al Sjpr • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Ppjdpfey En E Sjx Al Ssr Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm Ppjdoi D Di Sopfx Al Sor CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t dimensions of the machine ca. 0,8 x 1,1 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush Ppodpfjd Iin Ijx Al Ssr · Automatic cooling · Metal tension wheel for high power transmission c. · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Ppodpfjd Iin Rsx Al Sor Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 0,8x0,9x1,95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: used, mileage: 237,291 km, power: 103 kW (140.04 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, INTERNAL VEHICLE NUMBER: M511 ---- VW CRAFTER 2.0 TDI EURO 6d-TEMP ---- Mileage: 237,291 km, FULL SERVICE HISTORY Last inspection at 236,453 km on 25.09.2025 All maintenance performed at a manufacturer-authorized service center Digital service record available First owner ---- As-new M+S tires ---- * Crosswind Assist * Hill-Start Assist * Brake Assist (HBA) * Air conditioning * Front and rear Park Distance Control (PDC) * Navigation system * Start/stop automatic * SOS button ---- Additional water heater with stationary heating (auxiliary heater for cargo area) ---- ErgoComfort suspension driver's seat ---- Professional vehicle racking by Sortimo Shelving system with integrated drawers and vise Vehicle equipped with power inverter for 230V sockets LED airline rails Cargo hooks with max. load capacity of 30 kg Drawer configuration: - 24 drawers total - 11 drawers, each 65 x 40 cm - 6 drawers, each 40 x 40 cm - 3 drawers, each 60 x 25 cm - 2 drawers, each 40 x 30 cm - 2 drawers, each 65 x 30 cm Shelving configuration: - 2 shelves, each 140 x 60 cm - 3 shelves, each 140 x 45 cm ---- The VW Crafter is equipped with a ventilation system suitable for transporting gas cylinders ---- Integrated 230V sockets in load area and cabin ---- 270° rear doors ---- 2-seater ---- Wireless Apple CarPlay ---- * Bluetooth hands-free system * Apple CarPlay * Android Auto * 2 x USB-C * AUX * SD card slot * Multi-CD changer * Voice control * Electrically adjustable and heated exterior mirrors * Electric windows * Rear entry step * Storage compartment in cabin * LED lighting in load area * LED lighting in cab ---- Special features: * Second battery with monitoring * Storage package 2 * Driver and front passenger airbags * Passenger airbag deactivation * Discover Media audio navigation system (streaming & internet, touchscreen, USB) * Electrically adjustable and heated exterior mirrors * Parking assistance front and rear * Heavy-duty suspension and stabilizers front and rear * Partition wall with trim Ppjdextttnopfx Al Sor * Side marker lights * Emergency call system * Digital radio DAB+ * Spare wheel with tools and jack * Rear door hinges with increased opening angle * Mud flaps front and rear * Side/head airbag driver’s side * ErgoComfort suspension driver's seat * Driver's seat electrically adjustable (20-way) * Stationary heating with remote control and additional water heater * Rear entry step integrated in bumper * Additional heat exchanger Further equipment includes: * Convex exterior mirrors (left and right) * LED indicator lights integrated in exterior mirrors * Rubber flooring in cab * Underbody paneling for improved aerodynamics * Twin headlights * Dual-tone horn * Grab handle at rear left/right C-pillar * Hill-Start Assist * Brake Assist HBA * Crosswind Assist * Body type: High-roof panel van (standard volume) * Fuel tank: 75 litres * Truck registration * Engine: 2.0L - 103kW TDI * Multi-function display Plus * Rear fog lamp * Wheelbase: 3640 mm * Tire repair kit * Euro 6d-TEMP emissions standard * Right-hand side sliding door (load/cargo area) * SCR system with AdBlue technology * Electro-mechanical power steering * Start/stop system * Seatbelt warning system for driver * Permitted gross weight: 3.5 t ---- On request, we can retrofit a tow bar. Professional installation – fast and reliable, starting from €599.

Condition: used, mileage: 54,443 km, power: 81 kW (110.13 HP), first registration: 11/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M568 ---- VW T6.1 2.0 TDI Mileage: 54,443 km, fully documented service history Last inspection with oil change on: 06.02.2026 at 54,254 km All services have been carried out at manufacturer-authorized workshops. Complete digital vehicle history available. At 54,472 km (on 18.03.2026), rear brake pads and discs were replaced. ----Equipped with 8 tires: - 4 x as-new summer tires on steel rims - 4 x M+S tires (mud & snow) ----Vehicle features: Pedpfxjyupzxo Al Sspr * Brake Assist * Crosswind Assist * Front Assist * Cruise Control * Speed Limiter * Multi-Collision Brake * Front & Rear Parking Sensors (PDC) * Reversing Camera * Navigation System * Automatic Light Control * SOS Button * Auto-Dimming Interior Mirror * Air Conditioning * Start/Stop System * Heated Seats * Heated Windshield * Cargo Area Ventilation * Fire Extinguisher * Lashing Rails ----Professional Bott Vehicle Equipment: - Shelving system with drawers and pull-out workbench - Bott Vario floor panels - 3 drawers (each 50 x 35 cm) - 5 shelves (2 shelves 120 x 35 cm; 1 shelf 100 x 35 cm; 1 shelf 205 x 25 cm; 1 shelf 85 x 30 cm) - 3 lockable toolboxes - 4 toolboxes - Pull-out bench vise ----Infotainment & Connectivity: * Bluetooth hands-free system * Apple CarPlay * Android Auto * Voice Control * 2 x USB-C * On-board computer * 2 x driver's seat armrests * Electric windows * Electrically adjustable & heated exterior mirrors * Retaining partition * 3-seater * 12V socket * Storage compartments * LED lighting in cab and cargo area ----Special Equipment: * Discover Media audio-navigation system (touchscreen, USB, streaming & internet) * Light & Visibility Package * Comfort Package Plus * On-board tools and jack * Front and rear parking assist system * Perimeter monitoring system (Front Assist) with City Emergency Braking * Reinforced suspension and damping * Vehicle without child safety locks in load/passenger compartment * Cruise control system including speed limiter * Rear tailgate with window * Heated rear window with wiper * Metallic paint * Full-height load compartment partition with fixed window * Truck registration (N1 category) * Multifunction display Plus * Tire pressure monitoring * Spare wheel with identical running gear * Reversing camera * “Transporter” badge on fender * Driver’s cab seating: front double passenger seat with lockable storage bench * Heated driver’s seat; semi-height hardboard paneling in the cargo/passenger area * Reinforced lashing rings * Winter Package ----Additional Features: * Passenger airbag switchable * Driver and passenger airbags * Traction control (ASR) * Electrically adjustable and heated exterior mirrors (convex left and right) * Rubber flooring in driver's cab * Brake Assist System (HBA) * Multi-Collision Brake * Crosswind Assist * Laminated windscreen * 2 folding remote keys * Lockable glove compartment * 2.0L - 81 kW TDI engine * Rear fog lamp * Non-smoker package * Digital radio (DAB+) * Wheelbase 3000 mm * Low emissions according to Euro 6d-TEMP * Right sliding door in load/passenger area * Electromechanical power steering * Steel rims 6.5x16 * Engine start/stop system * Seat belt warning system (driver) * Heat-

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,292 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,500 g, number of axes: 3, This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details. Pjdpfxeyz Spts Al Sepr • Pendulum operation area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optional 198 Nm) • Tool holder: HSK A63 • Max tool length: 330 mm • Max tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: central coolant through spindle • Coolant tank capacity: 780 liters • Filter grade: 25 µm • Filter capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA • Compressed air requirement: minimum 7 bar • Weight: 10500 kg • Machine enclosure: full enclosure with electric roller door • Positioning system: glass scales on X/Y/Z axes • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional equipment • Chip conveyor: scraper belt type, discharge height approx. 1150 mm • Extraction system: MultiAir exhaust filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the Pjdpoxfwbtjfx Al Sepr target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t Ppjdofgyh Sjpfx Al Sjr dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling