Used Hitema Enr 055 for sale (735)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Fpedpfx Adouq A Ico Neg Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: used, Year of construction: 1998, pressure 40 t Fsdpfx Asvnwfnod Nspg stroke 250 mm total power requirement 6 kW weight of the machine ca. 3 t distance between columns 600/350mm mm table surface area 860x620 mm ram surface 860x620 mm table height 900 mm

Condition: used, pressure 160 t throat 360 mm stroke 500 mm Fpodelp U Hgopfx Ad Nsg table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg Fpsdpepm Thdjfx Ad Neg

Condition: used, Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair Fpodegnzykjpfx Ad Nog -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests Fpedpsw U Uhkefx Ad Njg 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 Fpedpopviqiofx Ad Njg center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: used, Year of construction: 2017, operating hours: 12,000 h, functionality: fully functional, cooling capacity: 1,200 kW (1,631.54 HP), type of input current: AC, type of cooling: water, overall weight: 7,000 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, temperature: -10 °C, total width: 3,770 mm, total length: 4,070 mm, total height: 2,400 mm, warranty duration: 6 months, input frequency: 50 Hz, Equipment: CE marking, compressor, RSW plant for chilling of pelagic fish in bulk. Evaporator 1200kW in modern Optiflux version. Compressors are 2 - Howden WRV163-145 racks Fpjdpfxew Ry D Ns Ad Nsg

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left Fpodpfewa I Shjx Ad Neg *

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m Fpjdpsvc Ax Nefx Ad Nog

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, De KH800 palenrammer van Maruzen is een krachtige hydraulische palenrammer ontworpen voor zware toepassingen zoals het plaatsen van grote houten palen, stalen pijpen, en andere hekwerk- of fundatietoepassingen. Deze palenrammer kan hydraulisch worden aangedreven door zowel benzine- als dieselkrachtbronnen zoals een graafmachine of shovel. Fsdpjurir Rjfx Ad Nspg De KH800 is uitgerust met een standaard adapter voor 150 mm ronde palen, optionele adapters zijn beschikbaar voor vangrail en stalen H-profielen om de veelzijdigheid te vergroten. De palenrammer werkt met hydraulische kracht en heeft een aanbevolen oliespecificatie van ISO VG32 of ISO VG46. De maximale slangdikte varieert afhankelijk van de olieflow, waarbij 3/8″ en 1/2″ slangen worden gebruikt voor respectievelijk 20-25 l/min en 25-35 l/min. Deze palenrammer wordt wereldwijd gebruikt voor uiteenlopende toepassingen, zoals wegenonderhoud, water- en elektriciteitsvoorzieningen, en spoorwegonderhoud, wat zijn veelzijdigheid en robuustheid benadrukt. Wij bieden de KH800 aan inclusief de KHL800 Geleider. De geleider vereenvoudigd het werken met de KH800 palenrammer en is in hoogte instelbaar doormiddel van een lier. Waardoor alle palen even diep de grond in worden geslagen. Mocht u geintresseerd zijn in de KH800 zonder de geleider of heeft u andere vragen, neem dan contact op met onze verkoopafdeling voor de mogelijkheden.

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks Fjdortqydopfx Ad Nspg This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, overall weight: 790 kg, empty load weight: 790 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 790 kg, chain condition: 100 %, Equipment: UVV, rubber tracks, Crawler work platform Tracked work platform CAPRI 04-06 We offer you; Crawler work platform Cabri 04-06 New machine Working height 6.5 meters Platform height 4.5 meters Machine dimensions: Machine length: 1380mm Width machine: 790mm Machine height 2110mm Height platform folded 1715mm Length platform (retracted) 1340mm Length platform (extended) 2759mm Platform extension: 595mm Platform dimensions: 1340x750x1115m Load capacity: 230kg Load capacity platform extension: 100kg Turning circle machine: 0 meter Drive motor 24V/0,8KW Batteries 2xDC 24 V Charger integrated 24V/15 A Machine weight 790kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. Fodpsrhwv Rjfx Ad Nepg With kind regards Steffen Küster K. u. K. Maschinen GmbH Alter Flugplatz 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: LDN0231008630, load capacity: 230 kg, lifting height: 6,000 mm, empty load weight: 1,710 kg, fuel type: electric, drive condition: 100 %, maximum load weight: 230 kg, operation weight: 1,710 kg, chain condition: 100 %, 0 Crawler work platform Crawler work platform CAPRI 06-08 We offer you; Crawler work platform Cabri 06-08 New machine Working height 8 meters Platform height 6 meters Machine dimensions: Machine length: 2067mm Width machine: 1030mm Machine height 2183mm Height platform folded 1832mm Length platform (retracted) 1859mm Length platform (extended) 2759mm Platform extension: 900mm Platform dimensions: 1859x810x1130m0 Load capacity: 230kg Fpsdjrig Ddspfx Ad Njg Load capacity platform extension: 113kg Turning circle machine: 0 meter Drive motor 24V/ Batteries 4xDC 24 V Charger integrated 24V/15 A Machine weight 1710kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Croyk77br3 Steffen Küster K. u. K. Maschinen GmbH Old airfield 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 2 h, overall weight: 3,030 kg, empty load weight: 3,030 kg, transport length: 2,535 mm, transport width: 1,390 mm, transport height: 2,010 mm, next inspection (TÜV): 09/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, color: blue, maximum load weight: 320 kg, working height: 12,000 mm, Equipment: UVV, 0We offer you; Tracked work platform Cabri 10-12 New machine year of construction 2024 Working height 12 meters Platform height 10 meters Load capacity platform 320kg Load capacity extension 113kg Length 2535mm Width 1390mm Height railing unfolded 2665mm Height railing folded 2010mm Platform dimensions 2270x 1105x1140 mm Platform extension 900mm Machine weight 3030 kg Charger integrated in the machine 48V/25A 2 drive motors installed 2x48V/4 Kw Gradeability 25% Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Fpsdpfx Adovdpr Ej Nog Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved. You will receive an invoice with VAT shown. Shipping is possible for an additional charge.

Condition: used, maximum load weight: 4,680 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/1999, next inspection (TÜV): 03/2026, Low-loader Blomenröhr, type 552/6500, standard version with loading ramps, rear supports, air brake system, front storage box, MOT until 03/2026, in good and ready-to-use condition. Fedpexthbyefx Ad Nopg

Condition: used, maximum load weight: 2,560 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/1998, next inspection (TÜV): 10/2027, loading space length: 3,530 mm, loading space width: 1,890 mm, total width: 2,870 mm, Blomenröhr low-bed trailer, standard version with loading ramps, rear supports, lashing eyes, front storage box, TÜV valid until 10/2027, in good and ready-to-use condition. Fodpfsxtcmdex Ad Nspg

Condition: used, maximum load weight: 4,880 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 02/2000, loading space length: 4,580 mm, loading space width: 1,890 mm, total width: 2,870 mm, Blomenröhr low loader, type 552/6500, in standard version with loading ramps, rear supports, air brake system, front storage box, new TÜV, in good and ready-to-use condition. Fpedpfxsxtcl He Ad Neg

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: Z293-068, functionality: fully functional, pressing force: 407 t, table width: 1,500 mm, table length: 2,500 mm, overall weight: 32,000 kg, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Table width: 1,500 mm Table length: 2,500 mm Fedpfxexm R S Ie Ad Njpg Hydraulic pressure: 320 bar Nominal force: 2 x 2,000 kN MACHINE DETAILS Electrical specifications Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 42 kW Rated current: 100 A Dimensions & Weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg EQUIPMENT CNC control Cooling unit Filter extraction HILMA console throat (1,600 mm)

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm Fpjdpfxjw H Di Aj Ad Njg spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm Fjdpfxsv Rgwxo Ad Nopg table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: used, Year of construction: 2001, Technical details: Fedpfsxna Uzex Ad Nspg pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: Fpjdew Smukjpfx Ad Neg pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, empty load weight: 4,100 kg, maximum load weight: 14,900 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 07/2015, loading space length: 6,700 mm, loading space width: 2,520 mm, loading space height: 880 mm, suspension: steel, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, leaf suspension, 2 axles, tandem, lashing eyes, mechanical ramps, front support, rear support, twin tires, height-adjustable drawbar. Fpedpfoxw Uwisx Ad Nsg Body: Blomenroehr tandem low-loader, 14,900 kg payload, Gigant axles, drum brakes, 50 mm drawbar eye, loading height approx. 1000 mm. Spring ramps laterally adjustable, 6 lashing rings each on left and right. On request, the drawbar eye can be converted to 40 mm and the trailer can be downgraded to a total weight of 13,900 kg! This would result in a payload of 9,800 kg for the trailer! Loading height approx. 880 mm! Ramp length approx. 2,450 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale and errors excepted.

Condition: used, empty load weight: 3,490 kg, maximum load weight: 9,510 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 05/1995, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 500 mm, suspension: steel, tire size: 205/80R15, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), U-protection, front support, rear support, twin tires Body: 3-sided tipper trailer with access ramps, steel drop sides can be folded down, 40 mm towing eye, drum brakes, center and corner stanchions plugged in, Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpedpoi Rk Igefx Ad Njg