Used Holz-Her 1417 for sale (6,126)

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Nedpfxjgyg Are Aa Roda -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Condition: like new (used), Year of construction: 2019, operating hours: 1,252 h, functionality: fully functional, overall weight: 2,500 kg, working width: 600 mm, working height: 250 mm, number of previous owners: 1, The machine was in operation for 4 years, running 5-6 hours daily. Included are 3 sets of blades. Nsdpfx Aasy Ny Aws Rjda

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm Ndedpoyk Dicefx Aa Rea - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available - Ndjdpoxw N N Hefx Aa Roa

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler Njdpfx Ajw D T T Esa Reda cooling capacity: 6 kW weight: 110 Kg.

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Ndjdpfxsi Dphte Aa Rsa Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Ndodpfx Aaoih Dxdj Rja Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg - immediately available - Nsdpfxsvk Sdko Aa Rjda

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Ndedpodqy Uqofx Aa Rja Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Nsdpfx Aecnxayea Rjda Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Njdpocnxa Sjfx Aa Reda Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Njdpfx Aaehkz E Ts Rsda Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Ndsdpfx Aohkz Hisa Rja Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment Ndjdpfx Aashk Dfro Rea All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Ndodpfx Aehp Rc Ioa Roa Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Njdpfozmdgxex Aa Rjda Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE Ndsdoxpva Aepfx Aa Rea General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Rotary cup filling and sealing machine S version (PLC control) E version (extended basic frame) Approx. 2,500 cups per hour Filling volume: 10 ml - 2,000 ml Suitable for cups/buckets in the food and beauty sector (with or without a handle) 8 stations Operations: - Cup destacking - Cup filling Nsdpfxezdzvfj Aa Rjda - Cup heat sealing - Cup capping

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Manufacturer Scherer Feinbau Type VDZ 220 DS Year of manufacture 2010 Nsdevu R I Njpfx Aa Reda Control Siemens Technical data Chuck diameter mm 315 Drive power (100%ED) kW 37.7 Torque (100%ED) Nm 300 Max. speed rpm 5500 X-stroke mm 625 Y-stroke mm +100/-80 Z-stroke mm 250 Tool system VDI 30+40 Spindle interface A6

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, HERTZ TRECON 7P screw compressor, machine with soft start, 500L tank, recently serviced. Technical specifications: Capacity: 1.20 m3/min (1200 L/min); Engine power: 7.5 KW; Maximum pressure: 10 bar; Year: 2017 Nedpozmufljfx Aa Rsda Compressor in fully working condition. Net price: 12,500 PLN Gross price: 15,375 PLN

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Ndodpfx Aajzm Sphe Rja Spindle motor: 6,9 kW Weight: 3,3 T

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Item No.: MT18-EB-400-1000 Njdpfxsdf R Rqs Aa Rsda

Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Nedefn Tu Tepfx Aa Roda Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless Speed The brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser. With extra robust table - also suitable for vices. Technical data: Motor power 1.6 kW (= 2 kW S6) Motor voltage 230 volts Quill taper MT 3 Quill stroke 120 mm Drill chuck 3-16 mm Speeds 150-3200 rpm Column diameter 80 mm Nodpox H Ukksfx Aa Reda Table dimensions 345 x 345 mm Base dimensions 520 x 320 mm Table tilt 90° left/right

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (contact via phone). Liebherr Wheel Loader Quick Coupler suitable for L556 / in stock & immediately available / good condition Price: €3,490.00 net / €4,153.10 gross This quick coupler is suitable for a Liebherr L556. We have a very large selection of various attachments in stock and immediately available! Mr. Herden (phone) is happy to assist you. Finance offers available upon request. We are official distribution and service partners for: - Magni telescopic handlers - Holp - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in inventory, we are also one of the largest commercial vehicle dealers in Germany. Njdpfx Aaeznrrlo Rsda We supply the complete Holp product range for you! Errors and prior sale excepted. Internal ID: 656005 = Further information = Intended use: Construction For more information, contact Marius Herden.