Used Homag Kfl 620 / 23 / Qe / 30 Softforming for sale (28,950)

Condition: ready for operation (used), Wagner 752-LT/EP30 polarity reversal unit / power module, part number 350615, serial number: 538236A, used, in good condition, 100% functional, scope of supply as shown in the photos. Nsdszm D Enjpfx Adrold

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 23726 Nlsdpfx Aeznvibjdred

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Nljdpfod E A I Nox Adred Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. BMS 125 forestry mulcher / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €28,290.00 net / €33,665.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches bushes and wood up to 30 cm in diameter - For excavators from 13 to 30 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts Nledpfjznrvqox Adrjd - Reinforced double-walled housing made of wear-resistant AR 400 steel - Forged counter blades - Hydraulically adjustable rear hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids in sandwich construction, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 rotor with fixed tools with inserts made of tungsten carbide - 1 x MONO EXTREME V-LOCK L, part number 19702266 - 33 x MONO TIP V-LOCK, part number 19702259 - 1 x MONO EXTREME V-LOCK R, part number 19702267 - Wear-resistant tool holder - Interchangeable rotor stub shafts OPT 465 M-BOOST bevel gear piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min 3 hydraulic lines are required: feed, return, and drainage. The unit is supplied without hoses, fittings, and attachment plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, which are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Please contact Marius Herden for further information.

Condition: like new (used), Year of construction: 2023, PHCBI CO2 Incubator MCO-230AICUV. Protective door (glass, interior). 4x height-adjustable perforated shelves. 1x drip tray. Lockable. Interior: stainless steel. On castors. Display with touch control panel. Nlodpfx Ajwutx Njdrsd Unused. Includes functional warranty.

Condition: excellent (used), mileage: 120,818 km, power: 118 kW (160.44 HP), first registration: 09/2023, fuel type: diesel, tire size: 215/75R16, axle configuration: 4x2, wheelbase: 4,040 mm, fuel: diesel, fuel tank capacity: 85 l, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,360 mm, total width: 2,050 mm, total height: 2,520 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,400 kg, loading space length: 3,770 mm, loading space width: 1,700 mm, loading space height: 1,820 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, power mirror, sliding door, traction control, Technical information Number of cylinders: 4 Engine capacity: 2.184 cc Axle configuration Tyre size: 215/75R16 Brakes: disc brakes Front axle: Max. axle load: 2100 kg; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 2400 kg; Tyre profile left: 60%; Tyre profile right: 60% Weights Empty weight: 2.170 kg Carrying capacity: 1.330 kg GVW: 3.500 kg Functional Cooling: -20 °C to 20 °C Make of bodywork: V300 MAX Stand-By 230V Cooling engine: diesel and electric Maintenance APK (MOT): tested until 09/2026 Nledpfx Adsyn Ik Sered Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: VTN-73-D Other information Cool unit make: Thermo King Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - DAB Radio - LED - Metallic paint - Multifunctional Steering Wheel - Parkingsensors back - Radio/Cd/Audio system - Rain Sensor - Reversing camera - Side Door Right - Spare wheel - Standby 230V - Xenon lighting = Remarks = VIDEO: Very nice and in new condition Fiat Ducato Maxi Power 2.2 JTD 160 HP Euro 6 Thermo-King V300MAX Cooling +20C/-20C cools/freezes and heats Standby 230V / cools by engine and 230V 120,000 km NAP National Car Pass Technically and visually in very good condition Cool unit brand: Thermo King

Condition: good (used), Several measuring probes from Heidenhain are for sale. -Manufacturer: Heidenhain -Type: TS110 / TS111, untested = €450 each TS110 / TS111, tested = €750 each Nljdohlafnjpfx Adrod TS220 / TS230 = €1,250 each ! As several measuring probes are for sale, please specify the desired type! -Mount: SK50

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Nedpswxdrbjfx Adrjld Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Nlsdpfx Adezkatcjrsd Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: used, mileage: 264,547 km, power: 170 kW (231.14 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 2,110 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 96774A Equipment lines and packages * L1Y LED lighting package Exterior * F6I Approach/front mirrors * K7I Exhaust tailpipe towards the center of the vehicle * F6J Exterior mirrors, electrically adjustable, left * White side turn signals * B1B Electronic brake system (EPB) with ABS+ASR * F2U ClassicSpace * Steel compressed air tank * B1C Low compressed air unit * F7W Single-step entry * F1X Cab: S ClassicSpace * F6C Tinted windshield * E1N Generator 100 A * G1D 6-speed transmission - Type: G 90-6 * K3T Urea tank (AdBlue): 25 L * D8A Manual lift roof (steel) * L1P Rear lights LED * I6A Body/superstructure: chassis * K0G Fuel tank: 180 L, plastic Nlsdpfx Adozm Dwkerod * LED daytime running lights * F5C Roof air deflector (lockable, without base trim) * L1H Fog lights * C9P Frame overhang - extension * E9H Switch for tail lift, trailer * Disc brakes on front and rear axles * L3Z Headlight cleaning system * F5L External sun visor * C8J Splash guard on rear fender * Fixed rear underrun protection * C7M Lateral underrun protection, weight-optimized * L9D Pre-installation for additional turn signals * I5Q Permissible total weight 7.49 t Interior * D4B Classic cockpit * D4W Electric windows * B1F Heated air dryer * Seat cover / upholstery: fabric * D2V Seats in the cab: armrests, driver's seat * D1M Seats in the cab: single passenger seat, fixed * D1C Seats in the cab: driver's seat, comfort suspension seat * E3F 12V / 15 A socket in the dashboard Multimedia * J1C Info display 12.7 cm with video function * J1R Tachograph / EC control unit * J9K Preparation for multimedia devices Comfort and Environment * M5M EURO 6 standard * S1P Driver assistance system: brake assistant (Active Brake Assist) * S1H Driver assistance system: lane keeping assistant * S1D Driver assistance system: stability control assistant * I6X Suspension: leaf spring / air * Q1J Suspension: front springs 3.6 t * S5Z Speed limiter (cruise control) * G5G Gearbox Mercedes-Benz PowerShift * D4Y Sunblind, side window, driver's door * C6S Reinforced rear axle stabilizer Safety * S3A Airbag, driver side * LED vehicle outline lights * E6Y Acoustic reversing warning (external warning signal) * J9J Preparation for reversing camera * J9D Preparation for toll collection * Immobilizer Other * R7H Aluminum rims 6.75x17.5 (ALCOA Dura-Bright) * M0S Engine compartment encapsulation * I4A Axle configuration: 4x2 * A1M Front axle load 4.1 t * E1H Battery 165 Ah * A2B Rear axle, differential 325 Other: This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily rate. The currency of the vehicle's location is valid. ----

Condition: used, mileage: 264,547 km, power: 170 kW (231.14 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 2,110 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 96774A Equipment lines and packages * L1Y LED lighting package Exterior * F6I Approach/front mirror * K7I Exhaust tailpipe to the center of the vehicle * F6J Exterior mirror, electrically adjustable, left * White side turn indicators * B1B Electronic braking system (EPB) with ABS+ASR * F2U ClassicSpace * Steel compressed air tank * B1C Low compressed air unit * F7W Single-step entry * F1X Cab: S ClassicSpace * F6C Tinted windshield * E1N Generator 100 A * G1D Transmission 6-speed - Type: G 90-6 * K3T Urea tank (AdBlue): 25 liters * D8A Manually operated sunroof (steel) * L1P Rear lights LED * I6A Body/superstructure: Chassis * K0G Fuel tank: 180 liters, plastic * LED daytime running lights * F5C Roof deflector (lockable, without base trim) * L1H Fog lights * C9P Frame overhang - extension * E9H Switch for tailgate lift, semi-trailer * Disc brakes front and rear axle * L3Z Headlamp cleaning system * F5L External sun visor * C8J Splash guard, rear fender * Fixed rear underrun protection * C7M Side underrun protection, weight-optimized * L9D Preparation for additional turn signals * I5Q Permissible total weight 7.49 t Interior * D4B Classic cockpit * D4W Power windows * B1F Heated air dryer * Seat cover/upholstery: Fabric * D2V Seats in the cab: Armrests, driver's seat * D1M Seats in the cab: Front passenger single seat, fixed * D1C Seats in the cab: Driver's seat, comfort suspension seat * E3F 12V/15A socket in the dashboard Multimedia * J1C 12.7 cm info display with video function * J1R Tachograph / EU control unit * J9K Preparation for multimedia devices Comfort and Environment * M5M EURO 6 standard * S1P Driver assistance system: Brake assist (Active Brake Assist) * S1H Driver assistance system: Lane keeping assist * S1D Driver assistance system: Stability control assist * I6X Suspension: Leaf / Air * Q1J Suspension: Front springs 3.6 t * S5Z Cruise control * G5G Mercedes-Benz PowerShift transmission * D4Y Sunscreen roller, side window, driver's door * C6S Reinforced rear stabilizer Safety * S3A Airbag, driver's side * LED vehicle outline lights * E6Y Acoustic reversing warning (external warning signal) * J9J Preparation for reversing camera * J9D Preparation for toll collection * Immobilizer Other * R7H Alloy wheels 6.75x17.5 (ALCOA Dura-Bright) * M0S Engine compartment encapsulation * I4A Axle configuration: 4x2 * A1M Front axle load 4.1 t * E1H Battery 165 Ah * A2B Rear axle, differential 325 Other: This offer is non-binding. Subject to errors and prior sale. Nlodpfszm Dv Tox Adred If a foreign currency is specified, it will be converted using the current daily rate. The currency of the vehicle location applies. ----.

Condition: used, mileage: 264,547 km, power: 170 kW (231.14 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 2,110 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal Vehicle No.: 96774A Equipment Lines and Packages * L1Y LED lighting package Exterior * F6I Approach/front mirrors * K7I Exhaust pipe to the center of the vehicle * F6J Exterior mirror, electrically adjustable, left * White turn indicators on the side * B1B Electronic braking system (EPB) with ABS+ASR Nljdozm Dwdjpfx Adrod * F2U ClassicSpace * Steel compressed air tank * B1C Low compressed air unit * F7W Single-step entry * F1X Cab: S ClassicSpace * F6C Tinted windshield * E1N Generator 100 A * G1D 6-speed gearbox - Type: G 90-6 * K3T Urea tank (AdBlue): 25 liters * D8A Manually operated tilting roof (steel) * L1P Rear lights LED * I6A Body/superstructure: Chassis * K0G Fuel tank: 180 liters, plastic * LED daytime running lights * F5C Roof air deflector (lockable, without base trim) * L1H Fog lights * C9P Frame overhang - extension * E9H Switch for tail lift, semi-trailer * Disc brakes on front and rear axles * L3Z Headlight cleaning system * F5L Exterior sun visor * C8J Splash guard on rear fender * Fixed rear underrun protection * C7M Underrun protection on the side, weight-optimized * L9D Preparation for additional turn signals * I5Q Permissible total weight 7.49 t Interior * D4B Classic cockpit * D4W Power windows * B1F Heated air dryer * Seat cover/upholstery: Fabric * D2V Seats in the cab: Armrests, driver's seat * D1M Seats in the cab: Front passenger single seat, fixed * D1C Seats in the cab: Driver's seat, comfort suspension seat * E3F 12V/15A socket in the dashboard Multimedia * J1C 12.7 cm info display with video function * J1R Tachograph / EC control unit * J9K Preparation for multimedia devices Comfort and Environment * M5M EURO 6 standard * S1P Driver assistance system: Brake assist (Active Brake Assist) * S1H Driver assistance system: Lane keeping assist * S1D Driver assistance system: Stability control assistant * I6X Suspension: Leaf spring / air * Q1J Suspension: Front springs 3.6 t * S5Z Cruise control * G5G Gearbox Mercedes-Benz PowerShift * D4Y Sunblind for side window, driver's door * C6S Reinforced rear axle stabilizer Safety * S3A Driver's airbag * LED vehicle outline lights * E6Y Acoustic reversing warning (external warning signal) * J9J Preparation for reversing camera * J9D Preparation for toll collection * Immobilizer Other * R7H Light alloy wheels 6.75x17.5 (ALCOA Dura-Bright) * M0S Engine compartment encapsulation * I4A Axle configuration: 4x2 * A1M Front axle load 4.1 t * E1H Battery 165 Ah * A2B Rear axle, bevel gear 325 Other: This offer is non-binding. Errors and prior sale are reserved. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies.

Condition: used, Year of construction: 2004, functionality: fully functional, HOMAG OPT HKL 11/43/22 – available in September! Currently in production. Bonus: 4 roll conveyors, each 4 meters long included! Technical Data Saw blade projection: 125 mm Cutting length / width: 4300 mm / 2200 mm Max. stack height without pit: 680 mm Max. stack height with pit: 880 mm Nlsdpfx Adszpxlberjd Main saw motor: 18.0 kW / 25.0 HP Scoring saw motor: 2.2 kW / 3.0 HP Saw carriage speed: 5–130 m/min Program fences speed: 80–140 m/min Total air volume (at 6 bar): 60 l/min Air pressure required: 6 bar Total connected load: 58 kW Extraction: 10,000 m³/h (≈26 m/s) Operating voltage: 3 × 400 V, 50 Hz Control voltages: 230 V / 24 V Installed power: 63.9 kW Rated current: 115 A Main fuse: 125 A Motor protection: IP54

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity available: 5 Manufacturer: Siemens Type: 6SL3000-0BE23-6DA1 Series: SINAMICS S120 Nlodpszm Ik Uefx Adrjd Category: Basic Line Filter Application: Reduction of conducted disturbances (EMC), compliance with grid feedback limit values according to EN standards Rated current: 23 A Voltage: 400 V AC Frequency range: 50/60 Hz

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Njdpfx Adezphrkorold Cabinet height: from 150 to 1400 mm Working height: 300 mm Weight: approx. 2.2 t

Condition: used, mileage: 1,095 km, power: 103 kW (140.04 HP), first registration: 12/2025, fuel type: diesel, empty load weight: 2,530 kg, maximum load weight: 970 kg, overall weight: 3,500 kg, wheelbase: 364 mm, next inspection (TÜV): 10/2027, CO₂ emissions: 234 g/km, fuel consumption (urban): 9.8 l/100km, fuel consumption (extra-urban): 7.9 l/100km, fuel consumption (combined): 8.9 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, soot filter, traction control, Digital radio reception (DAB), speed control system including speed limiter, air conditioning, lane keeping assist system "Lane Assist", crosswind assist, 1 USB port (compatible with iPod/iPhone/iPad) and multimedia socket AUX-IN, digital cockpit, hands-free Bluetooth system, prepared for "We Connect" and "We Connect Plus", multifunction steering wheel, rear wing doors without window cutouts, App-Connect, high roof, painted in vehicle color, panel van, 6-speed manual transmission, airbags for driver and front passenger, hill start assist, parking sensors front and rear, electronic stability program and ABS, daytime running lights, traffic sign recognition, 4 speakers, touchscreen (8.7 inches), distance warning, exterior mirrors electrically adjustable/heated, sliding door on the right, sun visors, two folding and side-swiveling, start-stop system including brake energy recovery, central locking with remote control, double passenger seat on the right with storage compartment and folding backrest with storage table, electric windows, ABS & immobilizer, seat covers in fabric, design "Austin", partition, steel wheels, trailer coupling preparation, diesel particulate filter, medium wheelbase 3,640 mm, tire pressure monitoring, electronic immobilizer, enhanced interior noise reduction, 12-volt socket, rubber flooring in the driver's cabin, storage package, multifunction display Plus, new MOT/emission test, fresh food service up to 0° Celsius 230 V: NEW from July 2026 + UNUSED! Robust insulated interior (HACCP) with a smooth surface, almost completely without silicone joints! Loading edges in stainless steel, floor coated to be non-slip and slip-resistant, rear doors with reinforced ISO attachments! Rear doors with an opening angle of 180°! Partition to the floor at a 90-degree angle! ... Integrated driving and parking cooling, 230-volt mains operation - without roof-mounted unit: M-TEC FRIGO DOMETIC 4500 ... Payload: approx. 970 kg payload ... Internal dimensions of the refrigerated cargo space: Length: 3,010 mm Nsdpfxowr N T De Adrsld

Condition: used, mileage: 66,050 km, power: 105 kW (142.76 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,710 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 1672X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, inside and out: Good and well-maintained condition. 1st owner, German vehicle, non-smoking vehicle. Complete service history, only serviced at Mercedes Benz. New front brakes. Permissible total weight: 5,000 kg. Twin tires at the rear. Workshop "Bott" with workbench and shelving systems. 230-volt external socket. 230-volt sockets with fuse in the cargo area. Roof rack "Bott". Ladder lift system "Rhino". Trailer hitch. Rear-view camera. Navigation system. Controlled air conditioning (Tempmatik). LED cargo area light with switch. All-round lights with switch. Roof window. Nledpfozcivrjx Adrsd Tachograph. Comfortable driver's seat. ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Storage compartment in the roof lining of the driver's cabin * Airbag, passenger side * Trailer hitch: ball head, for increased trailer load - 3.5 t * 13-pin trailer socket * Entry handle on the rear pillar, rear right * Tachograph operation in front, under the roof lining * Fixed window in the roof, rear * Additional main key * Rear door (opening angle 270 degrees) * Wooden flooring in the cargo area * Folding cover for storage compartment * Folding cover for storage compartments left/right * Connection strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Cable duct on the rear portal * Cable duct on the side wall * Side marker lights * Navigation system for multimedia system MBUX * Crossmember with integrated step * Spare wheel in driving condition * Spare wheel holder under the end of the frame, including jack * Rear-view camera * Mud flaps, rear * Mud flaps, front * Safety belt system with warning system (passenger side) * Seat cover / upholstery: imitation leather Artico * Seats in the driver's cabin: passenger double seat * Seats in the driver's cabin: comfortable driver's seat * Socket (12V connection) in the cargo / passenger area * Paneling in the cargo / passenger area: wood, high (up to the roof) * Fleece battery 92 Ah Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag, driver's side, hill start assist, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, roof lining in the driver's cabin, automatic activation of headlights, entry handle for sliding door at the cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: active brake assist, driving assistance system: side wind assist, driving assistance system: lane keeping assist, digital, downloadable tachograph, electric windows, 2-way, 6-speed gearbox - TSG (Eco Gear), body/superstructure: high-roof van.

Condition: used, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 Nedezpx A Hspfx Adrsld DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg IMPORTANT NOTICE!!! This machine is a customer return. BAGS ARE NOT INCLUDED. NO WARRANTY.

Condition: used, Year of construction: 2026, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Product characteristics: Nsdpfszpxz Asx Adrold The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL IMPORTANT NOTICE: This machine is a customer return. It is used and fully operational. NO WARRANTY. NO RETURNS.

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Nljdpfxezmmuls Adrsd Max. working thickness: 60 mm Number of painting guns: 4

Condition: new, Year of construction: 2026, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment Nsdew H Rauopfx Adrjld 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: new, Year of construction: 2026, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Nedpfxjwnca Ao Adrold Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: used, mileage: 760,827 km, power: 169 kW (229.78 HP), first registration: 11/2005, fuel type: diesel, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, total length: 9,750 mm, total width: 2,550 mm, total height: 3,950 mm, loading space length: 7,470 mm, loading space width: 2,480 mm, loading space height: 2,690 mm, Year of construction: 2005, Equipment: ABS, cruise control, onboard computer, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Radio/CD player - Central lubrication system = Further Information = Transmission: Opticruise 3 x pedals, semi-automatic transmission Number of cylinders: 6 Engine displacement: 9,000 cc Unladen weight: 970 kg Nsdpfszl Db Hjx Adrjld Payload: 9,220 kg GVWR: 19,000 kg Please contact Vitali Lenda for further information.

Condition: new, Year of construction: 2026, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 100mm vice. Machine description Nledsvuf Ikepfx Adred tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 1060mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 660mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W HEIGHT 1650mm WEIGHT 75kg

Condition: ready for operation (used), Lowara SV 214 F 22 T pump with SM90RB14/322 motor, serial number: 107230220, used, in like-new condition, 100% functional, scope of delivery as shown in the photos. Nedpfx Aszmlzwsdrold