Used Hommel 225-250 Mm for sale (74,398)

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg Iaedjgrzvrspfx Apcor

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 140 mm -Passage: Ø 76 mm Isdpfx Apodrwlpscjar -Weight: 30 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Iaodpod Ira Ajfx Apcer -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 60 mm -Stroke: 250 mm -Total length retracted center center hole: 690 mm -Piston rod holder: Ø M48 mm -Cylinder holder: Ø 60 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 750/250/H160 mm -Weight: 52 kg/piece Iasdjd Evuqjpfx Apcjr

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 75/250 mm Iedpfxoc Nir Ie Apcoar -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Condition: used, Vernier caliper, caliper, caliper -Measuring range: 0-250 mm Iaedecb T R Tepfx Apcjr -for: internal measurements -Number: 1x caliper available -Price: per piece -Weight: 0.75 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Flange: Ø 210 mm -Hole circle: Ø 230 mm Ijdpsb Uhrqefx Apcoar -Through hole: Ø mm -Weight: 19 kg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 Isdpfx Apsxak D Rjcoar - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: good (used), Thread cutting machine, pipe thread cutter Iodpfxjwyu Hfj Apcjar -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Iaodpfx Apjd It Idecjr -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

Condition: good (used), Grinding drum, deflection drum, belt sander, belt sander, drum sander, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 150 mm -Drum: Ø 250 mm -Hole: Ø 45 mm -Number: 4 drums available Price: per piece Iasdpfevxgvksx Apcer -Dimensions: Ø 250 x 150 mm -Weight: 14.0 kg/pc.

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg Iajdpfx Apecbqqxscsr

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos Iaedjv U Nwispfx Apcjr -Dimensions: Ø 275 x 115 mm Total weight: 30 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg Iedexunupepfx Apcear

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg Iedpfxsd It Ifj Apcjar

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,746 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,350 mm, drive type: Elektro, Low-lift order picker Load centre of gravity: 600 Condition: Ready for use and fully functional Iajdpfx Apevpmryjcsr Technical condition: good Front tyres type: polyurethane Rear tyres type: polyurethane Battery voltage: 24V Description: Initial lift,

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available Ijdpfxjh R D Rdo Apcoar -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Iaedpewvficofx Apcor -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Clamping aid -Clamping plate -Mouth size: Ø 255 mm Iaodpfx Apsb A Nqwjcer -Weight: 20 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Ijdpfx Aob A Rd Espcjar -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 Iedpjb A Hvpofx Apcsar -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece

Condition: used, Three-jaw chuck, three-jaw lathe chuck Ijdpfx Asd Irbkopcsar -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm Iajdob A Smwepfx Apcer -Cone: Ø 106 mm -Weight: 28 kg

Condition: good (used), Four-jaw chuck, 4-jaw chuck Iedpfx Aped S Rfqecsar -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Iajdpfsv N Ubcsx Apcsr -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg