Used Hydraulic Press, Electric Motor Press for sale (64,646)

Year of construction: 1997, condition: used, Technical details: Fodpfx Afju Nfn Rjusgh pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm - working height 1350mm - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Fedpfjzmfvusx Afuegh Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: new, rotational speed (min.): 2,975 rpm, rotational speed (max.): 3,578 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, overall weight: 415 kg, For sale, Electric motor - Siemens Fjdpfev Unztjx Afuogh - 55kW - 2975-3578 RPM - Shaft diameter 60mm - Weight 415kg - 1CV3252A - 1LE15032CA234GB4-Z

Condition: excellent (used), Year of construction: 2004, SCHULER HYDRAP Year of manufacture: 2004 Press force: 10,000 kN Stroke length max.: 1,650 mm Fgedpfxsz Ei A Te Afueh Installation height: 2,400 mm Closing speed: 420 mm/s Working speed max.: 68 mm/s Working speed at rated force: 21 mm/s Tool base area max.: 3,900 x 2,400 mm Tool base area min.: 1,800 x 1,200 mm Tool installation height: 750 mm Tool weight max.: 50,000 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Nameplate present Fjdow Rn Hxjpfx Afuogh Price negotiable Our asking price is €1,150.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec Fedpfx Afexaabfsusgh return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm - Movable tables for press: 2 - Approach speed: 600 mm Fsdpozy Uuysfx Afuegh - Working speed at 50%: 96 mm - Working speed at 100%: 46 mm

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm Fsdpovu E T Hefx Afusgh tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Fsdpsxvdnbefx Afujgh

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Fgedpfx Afoxu N H Houjh

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. All engines are new or used, but refurbished. Approximately 3,000 units. Various manufacturers: Siemens, ČKD, MEZ, etc. Fodszgu D Iopfx Afujgh Price per 1 kg: 1.50 EUR.

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW Fgsdpfsyfwxtjx Afujh weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek Fgsdpjyfwywefx Afueh speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: excellent (used), electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 280S/M-02 -Power: 90 kW -Speed: 2970 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 1070/560/H745 mm -Weight: 692 kg Fgsdpfx Ajuicdyefujh

Condition: good (used), electric motor, three-phase motor Fjdpfszxyvtjx Afusgh -Power: 0.55 kW -Speed: 1410 rpm -Shaft: Ø 19 x 40 mm -Design: B3, explosion-proof -Protection class: IP 55 -Quantity: 1 available -Dimensions: 320/163/H255 mm -Weight: 24.1 kg

Condition: excellent (used), Eurodrive geared motor (28450) FA 37 B DT 71D4 BMG MM 03 o,37kw Speed 15-73 n1/min. Transport dimension: L.390 mm W.350 mm Fodpjrc Dkxjfx Afusgh H.180 mm Weight 25 kg

Condition: good (used), Berg electro piperail trolley Electric hydraulic scissors / plateauThe piperail distance for this trolleys is 42,5 cm center to center * Without batteries * Option new batteries Euro 550,- More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery Fgedpfx Aoz Rgg Isfush

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Fgjdpfx Afeyridbjueh Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm Fgedpfx Asu N A Eaefueh *

Condition: excellent (used), functionality: fully functional, Manufacturer ATB Antriebstechnik G. Bauknecht AG Power 15 kW Speed 1460/min Fgodpfxjzyzw Io Afujh

Condition: good (used), Year of construction: 2007, Machine is in good condition. Fgjdpez N Dgvsfx Afuoh

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Fgjdpjtrpiijfx Afush Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm Fgedpfeu Nfm Tex Afujh total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: new, For sale: professional electric motor from the renowned German company VEM motors GmbH Model KTTR 132 SX2 The motor is new, stored in a warehouse, and has never been used. Very good condition, with possible minor signs of storage. Technical data: Power: 7.5 kW Speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Current: 14.5/8.4 A cos φ: 0.86 Protection rating: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Made in Germany Fgjdjyv R Rfjpfx Afush Applications: – Industrial machinery – Pumps – Fans – Production lines – Automation A solid and reliable motor, ideal for operation in demanding industrial conditions.

Condition: good (used), electric motor, three-phase motor Fgedpfjb A Hcbex Afuoh -Spare part: of a CNC lathe -Power: 11/15 kW -Speed: 1460/2900 rpm -with electric clutch: 24 V and V-belt pulley -Design: B5 -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg