Used Infeed Diverter Inclined Infeed Outfeed for sale (3,603)

Year of construction: 2026, operating hours: 24 h, condition: new, functionality: fully functional, Equipment: CE marking, THANKS TO HORIZONTAL AND VERTICAL BRUSHES, IT PERFORMS BRUSHING AND CLEANING OF BOOTS AND BOOT SOLES. BRUSHES ARE EASY TO INSTALL AND DISMOVE. EASY PLC CONTROL SYSTEM IS AVAILABLE. THERE IS A TIME-ADJUSTED SYSTEM IN THE PASSAGE SYSTEM (IT IS POSSIBLE TO SET THE TIME OF THE BRUSH, SENSOR SINK AND DOUBLE HAND DISINFECTANT SYSTEM). Pedpozg Aznjfx Afljgp THERE IS NO PASSAGE PERMIT WHEN THE PERSONNEL JUMPS THE QUEUE. (THE QUEUE SYSTEM IS REQUIRED TO DO SOLE SCRUBBING, HAND WASHING, AND TWO-HAND DISINFECTANT.) IT HAS A TWO-DIRECTION FREE PASSAGE FEATURE IN CASE OF A POWER CUT. COMPLETE CHROME STAINLESS SENSOR SINK DOUBLE HAND DISINFECTANT HORIZONTAL BRUSH HYGIENE MAT MANUAL SOAP DISPENSER Z NAPKIN HOLDER AVAILABLE. OPTIONAL SELECTION (SENSOR SOAP DISPENSER, SHOES SHELTER JET DRYING ETC)

Condition: ready for operation (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable Pgedpfxevxuy Rj Aflop for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002173BXA Note: some images in the ad may be on another equivalent machine

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Pgsdpeh Dxqvefx Aflep Inclusive pumps, Control and other accessories. Nice condition

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2892/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Psdett Sguepfx Aflogp Sales are subject exclusively to our general terms and conditions (AGB)

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Pgsdpfxott Sf Eo Aflsp Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2893/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) Pgjdpfxoimdtvj Aflop VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Year of construction: 2013, condition: ready for operation (used), Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible. Pjdpfxsy Ey Tno Afljgp

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates essential functions such as active drying and media loading directly into the unit to save space in the practice. Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental practices. It integrates key functions such as active drying and media loading directly into the unit to save space in the practice. The Melag MelaTherm 10 DT is a thermal disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates important functions such as active drying and media loading directly into the unit to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and therefore fits under a standard 60 cm worktop. Capacity: The optimized reprocessing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments from corrosion and recontamination thanks to integrated external and internal drying. Pgsdpfx Asyk Eugsflep Integrated process media: Cleaner, neutralizer, and rinse aid are stored in a space-saving drawer directly within the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Hygienio B1.N1 Steam Disinfection System The B1.N1 is ideal for ambulances, medical practices, dental clinics, and smaller premises. Its compact size and unique features make it the perfect choice. If you're looking for a reliable and efficient disinfection solution without complicated handling, the Hygienio B1.N1 is exactly what you need. The ultimate simplified disinfection system – designed for ease of use and operation. The B1.N1 model does without an electronic control unit, making it exceptionally easy and effortless to operate. Thanks to the manual and direct system status check, you have complete control over selecting the right application mode – whether disinfectant or steam. The liquid tanks are equipped with optical level indicators, allowing you to monitor the fill level at all times and prevent potential damage to the internal components. Mobility: 4 abrasion-resistant rubber wheels Pgsdpfx Afoykt Inelep Consumption: 2 liters of disinfectant solution per hour Tank capacity: Water tank: 2 l / Disinfectant tank: 2 l Operating pressure: 2.5 - 4 bar Dimensions: 93.5 x 48.5 x 35.5 cm Lance length: 240 cm Weight: 23 kg Power cable length: 4 m Manufacturer's price: €3500 Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Smicon PT 1500 fumigation Fumigation system Fumigation machine Disinfection machine; Smicon PT 1500 fumigation / fumigation system During fumigation, a room is flooded with a toxic gas to combat pests/bacteria. As these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g. grain storage, in harbor warehouses, silos, mills) and also in churches to combat woodworm. Pgodpfxju Ny Ncs Afljp It is a device that is used to disinfect rooms. Formaldehyde is boiled on the left hotplate and placed together with condensed water (right hotplate) in an air stream in a room and kills all bacteria there. Former list price € 9,900 Item condition: used

Condition: good (used), Smicon AFT 2/1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. Pgsdpfxjdviyne Aflep It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth), killing all the bacteria. Former list price 10,900 € net More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 € Item condition: used Pedpfxjdviyxe Afljgp More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Pgjdpfxszki Txj Afljp Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Psdpsy Um T Hjfx Aflegp Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: used, Year of construction: 2007, RA1288 Gebhardt Roller Conveyor System individually plannable. Price on request! We plan your individual conveyor system with tested, used Gebhardt conveyor technology, according to your wishes! Large quantities and different designs available! The Gebhardt conveyor systems are in a very good (used) condition. The roller conveyors are available in different versions, e.g. as: gravity roller conveyors and curves - roller conveyors and curves without drive Pgodpfek Aa Slex Afljp roller conveyors and roller curve conveyors - roller conveyors and curves with drive Accumulation roller conveyor (without accumulation pressure) - for separating the conveyed material Inclined inlets and pusher - for infeed or outfeed Stroke converter (toothed belt pusher) - for inward or outward transfer Roller switches - for sorting the conveyed material Available conveyor lengths (FL): e.g. 3000 mm, 2000 mm, 1500 mm, 1000 mm (individually customizable) Available nominal/outer width (NB): 610 mm, 510 mm Available roll widths: 550 mm, 450 mm roller pitch: 100 mm, 75 mm The following accessories are optionally available e.g..: Motors with and without frequency converter of the brand SEW Eurodrive / Movimot Supports variably adjustable side guides Light barriers /-switch Price: on request plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Sormac PO-30 Pepper Decoring, Slicing & Wedging Line Complete Sormac pepper processing line equipped with 4 × Sormac PO-30 pepper coring machines for the automatic coring and processing of bell peppers. This high-performance processing line is designed to deliver high throughput and consistent product quality for the fresh produce and food processing industries. The PO-30 coring machines accurately remove the core and seed membranes, while an integrated vacuum system efficiently extracts seeds and seed residues, ensuring a clean finished product with minimal product loss. The line is equipped with infeed and outfeed conveyors, providing a continuous and efficient product flow. It is suitable for processing red, yellow, green, and orange bell peppers, making it ideal for the production of fresh-cut vegetables, vegetable mixes, meal components, and convenience foods. Thanks to its stainless steel construction, the installation is hygienic, durable, and easy to clean, making it perfectly suited for modern food processing facilities. This used Sormac processing line is an excellent solution for companies looking to increase production capacity or automate their bell pepper processing. The combination of four PO-30 coring machines provides high processing speeds, reliable performance, and an efficient production process. The line is currently disassembled. The line consists of: Infeed conveyor with cleats – dimensions (W × L): 600 × 3,500 mm Distribution conveyor with 4 pneumatic diverter valves – dimensions (W × L): 600 × 9,250 mm 4 × Sormac PO-30 coring machines Finished product outfeed conveyor – dimensions (W × L): 600 × 10,500 mm 4 × vacuum units with waste discharge conveyor – dimensions (W × L): 400 × 9,000 mm Central electrical control cabinet Operating principle of the PO-30 coring machine Station 1: The pepper stem is cut off. Station 2: The pepper is cored, and the seeds are removed. Station 3 (optional): The top, the bottom, or both ends of the pepper are cut off simultaneously. Station 4 (optional): The pepper is segmented into 4 pieces. After machine modification, segmentation into 2, 3, 6, or 16 pieces is also possible. Technical Specifications Production capacity: Up to 11,200 peppers/hour (depending on product, quality, and operator) Product diameter: 60–115 mm Product length: 70–140 mm Functions: Coring, cutting, segmenting Pgedpfx Afozkb Twolsp Power supply: 400 V (3 + N, 50 Hz) Power consumption: 6 kW Year of manufacture: 2020 Compressed air requirement: 6 bar (1,600 L/min) Overall dimensions (W × D × H): 15,000 × 4,000 × 3,000 mm

Condition: used, functionality: fully functional, Inclined belt conveyor, used, without belt, functional, made of stainless steel. Pgodpezi Dzzofx Aflop Infeed height: approx. 20 cm Outfeed height: approx. 2.70 m With cover.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: Pgsdpfxowftt Uo Afljp • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) Pgjdpjzi Hwfefx Aflop • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Pgedezd Uqcepfx Afljp Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. Pgjdpfxey An I Io Aflop System footprint - 7.5m long x 3.4m wide x 4.4m high.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. Pgodpeyvac Asfx Aflop 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: used, Colour: Grey The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Pgodpfjwnhxdox Aflep Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 7 - └ Unit 1: - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches Pgedpfjy Tlc Dex Aflep - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: good (used), Year of construction: 2016, Material Handling System, TGW, nominal width 420mm, approx. 1,100m – used – Ex-works price (net): now only €99,000 instead of €269,000 – dismantled, packed and loaded, including controls, supports, etc.! Manufacturer: TGW Year of manufacture: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Excerpt from Hall 2 inventory: Approx. 42 units Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB): 420mm Roller pitch: 110mm Zone length: 990mm Number of KDRs per zone: 2 units Roller type: steel Conveying speed: variable, e.g., 0.47m/s Acceleration / deceleration: 1.5 m/s² Available in various versions Similar to above, only: Approx. 38 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm Pgsdpjy Iv Elofx Afljp Similar to above, only: Approx. 4 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 units 770mm = approx. 3 units 412.5mm = approx. 1 unit 330mm = approx. 23 units KCS KingDrive Infeed/Outfeed: approx. 8 units 420mm KCC KingDrive Curve Conveyor A and T, 90 degrees = approx. 6 units 420mm 45 degrees: approx. 3 units 30 degrees: approx. 2 units 55 degrees: approx. 1 unit Roller tracks, length approx. 100mm = approx. 33 units 420mm, plastic rollers, non-driven Toothed belt diverter/inserter K: approx. 5 units 420mm Toothed belt transfer unit K: approx. 14 units 420mm, module length: 800mm PWT Pop-Up Roller Transfer: approx. 4 units Belt conveyors: approx. 18 units BFT2000 GF Belt Conveyor Nominal width 420mm