Used Inserter for sale (1,923)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: black, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support jacks, single-sided operation, with straight lower part, without thrust compensation. Note: Free support foot angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door latch on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker," transverse steel angle zinc-plated, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking system: 2-line compressed air braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, no truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be possible in the truck). Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve print plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front wall / front corner posts 2,580 mm high, corner posts steel in full profile, release mechanism for side tarpaulin on the front wall, "crash blocker," at the bottom inside at approx. 140 mm height with steel impact protection. Side supports: 2 pairs of sliding supports, adjustable over the entire length, with 4 insertion pockets and at the bottom with a long pocket. 2 pairs of support positions. Insertion slats: 5 rows of aluminum V-shaped insertion slats. Rear wall / rear corner posts Corner posts at the rear steel to the bottom edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal swivel latch locks each. Ljdpfsy Tvwxox Agtshk Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, minimal deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with automatic forced ventilation via brake light, optimal rain strip at the r

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Ljdpjy Sy Npofx Agtehk Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Lsdpszd Dm Hjfx Agtohk Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Lhjdpfxezcp E To Agtsk Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climate test chamber Technical data: Nominal volume of test chamber: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width 2000 mm, height 1000 mm Viewing window, heated, 2 pieces, width 500 mm, height 600 mm Feed-through opening, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, time-dependent ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 % RH Humidity difference, time-dependent ≤ ± 3.0 % RH Dew point range, intermittently up to -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Lodpszd Sdmefx Agtjhk We will be happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,800 kg, empty load weight: 2,200 kg, loading space width: 2,530 mm, loading space length: 6,500 mm, loading space height: 1,600 mm, Dear Sir or Madam, We are offering brand new roll-off platforms for sale, manufactured in our own production facility. The platform shown in the picture has the following features: - Manufactured according to DIN 30722-1 - Mounting bracket with a diameter of 50 mm - Hook height of 1570 mm - Usable length of the superstructure 6,500 mm - Usable width of the superstructure 2,530 mm (min. 2,420 mm load area between the inserted stanchions) - Front wall height 1,600 mm - Reinforced IPN 180 longitudinal beams - 5 mm diamond-plate flooring - Cross braces spaced approximately 400 mm apart - Sheets and profiles continuously welded - External rollers are lubricated and replaceable - 5 pairs of recessed lashing eyes with a tensile force of 2,500 kg each - Lashing eye rails along the entire side length - 12 pieces of galvanized, solid, separately lockable, insertable stanchions -> Stanchion pockets: 6 on each side and 2 at the rear -> Material thickness 100 x 50 x 6 mm - Warning markings according to §32 (1) StVO & DIN 67520 Lodpfxszd Sdte Agtohk - Total weight 15,000 kg - Unladen weight approximately 2,300 kg - Payload approximately 12,700 kg - 2-layer primer & coating with Wagner Automotive paint - Painted in RAL 7016 - Includes type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Available immediately - Unit price €5,300.00 plus 19% VAT Delivery throughout Germany is possible for an additional fee! Also available with a 6 m usable length. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale are subject to change.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,230 kg, maximum load weight: 14,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 870 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, *Wechel Central-Axle Trailer Chassis Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locks height-adjustable by approx. 120 mm for parking height 1070 mm, lifting height then approx. 1150 mm, and driving height then approx. 990 mm; foldable with center supports. Includes guide rollers that can be inserted into center supports (locking mechanism from the Vario chassis at the rear) 4 container locks with sturdy arms on a 20" base for swap bodies 7.15 / 7.45 and 7.82 1 pair of front transmission support legs, with straight lower section and single-sided operation on the right rear Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection Half-shell fenders 1 spare wheel holder for 1 electric bike, with wheel mounting kit 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock. (Lock not included) *Towing equipment for central-axle trailer Lhedpfezd Uyqjx Agtek Towing beam with certified 50 mm tow eye, freight transport version (not suitable for trucks with tail lifts; detailed verification may still be required when placing an order) Towing beam lower coupler, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF drum brake axles “Laser-aligned axles/chassis” Reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Brake System with EBS connector at the front, with connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability System *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 additional LED work lights at the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Operating Instructions The specified total weight is technically possible; however, depending on the cargo, the total weight may not be reached while complying with the permissible axle, support, and fifth-wheel loads. (Poor handling and tracking may result from improper load distribution) *Country of Registration/License Plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: used, mileage: 17,047 km, power: 235 kW (319.51 HP), first registration: 09/2025, fuel type: diesel, overall weight: 15,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, EBS, full-brake assistant, hill start assist, LED lighting, 2 kg fire extinguisher, ASR, lane departure warning system LDW, lane change assist LCS and turning assist, automatic voice recognition activated via driver card via MAN Now, navigation system + Europe + Russia map, RINGFEDER type RF40/G150B curtain-sided body with BÄR BC 1500 S4, 1810 mm x 2520 mm, 1500 kg, clear loading height 2400 mm, 9 pairs of recessed lashing points in the outer frame profile, 3 rows of aluminum insertion strips, 3 rows of wooden insertion strips, color RAL 5010, step + grab handle at the rear on the right side. Lhsdpfx Agszciwcjtek

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts Lhodszbc Dtepfx Agtok The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: used, empty load weight: 6,570 kg, axle configuration: 3 axles, first registration: 06/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, mileage: 347,999 km, ref: F0900316 Equipment: * Air connection: Red/Yellow head, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Document box, * Ferry lashing, * Side impact protection, * Lifting odometer, * Wheel chocks: 2, * Tool box: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Pull rod for sliding tarp, * Side sliding curtain, * Multilock, * Floor: Plywood floor, * Rail pocket left, * Rail pocket center, * Rail pocket right, * Insertion strip (wood): 24, * Rail depot: Right, * Customer lettering VIN: WKESD00000900316 Tire size: 385-65 R22.5 Lhsdpfxjzbc N Ne Agtok Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.01 m Internal height: 2.79 m

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 9,325 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, ## Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction (basic lightweight design) * Patented curved front end design * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate, including thrust compensations * Spare wheel carrier for 1 spare wheel including mounting kit * Spare wheel matching the original tyres, mounted on steel rim * Lockable plastic toolbox with drawer and shelf insert (650 × 520 × 670 mm, W × H × D) * Tarpaulin support bar with holder * Rear towing hooks ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Off-road axle specification * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded piping for easy maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front * EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * White LED front position lights (2 units) * White/red LED rear outline marker lights (2 units) * 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables) * Additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Aluminium Box Body (40 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed for improved material discharge resistance * Internal access ladder at front wall Lhodpfxezhgp Se Agtek * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Rear Door System * “Membrane” tailgate design * Pendulum rear door with double-joint hinge system * Externally mounted with double hook locking system * Rubber-sealed tailgate * Central grain slide gate ### Floor & Equipment * Continuous 6 mm aluminium floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction)

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Condition: Used Technical Data: 230V AC Lsdpfxezh Iqwo Agtehk 50/60Hz 2100VA General: Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a new roll-off platform for sale, manufactured in our own production facility. Ljdozhid Sepfx Agtshk The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Usable platform length 6,500mm - Tare weight 2,400kg / Payload 12,600kg - 5mm diamond-plate floor / 4mm front wall thickness - Robust hook mount with surrounding plates - IPN 180 longitudinal beams / reinforced - External rollers, lubricatable and replaceable - Primer, painted in RAL 7016 / Anthracite - C-locking mechanism according to DIN - 5 pairs of recessed lashing eyes with a tensile force of 2.5t each - Each side with perforated strips with 30mm holes - 6x robust and lockable inserts for leveling the wheel tracks - Wheel tracks recessed by 120mm - Recessed wheel tracks, each approx. 5500mm long & 708mm wide - 2x lockable steel storage compartments at the front - 2x lashing rings with 5.3t tensile force each on the inside of the front wall / 2x 5.3t lashing rings embedded in the floor at the rear - 2x warning markings according to §32 (1) StVO & DIN - Incl. type plate & container inspection according to DGUV rule 114-010 - Immediately available Also available in 5.5m and 6m usable platform length. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, we would be delighted to receive your inquiry!

Condition: good (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Mahr Feinprüf, Measuring Probes, Position Sensors, Displacement Sensors -Type: 1302 Lsdpfxszi D Twj Agtohk -Quantity: 1x measuring probe available -Box dimensions: 155/100/H35 mm -Weight: 0.3 kg

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale Ljdpszk Dxijfx Agtehk + Insert belt

Condition: good (used), Horizon BQ-270V Perfect Binder Machine in very good condition. In addition, the machine is equipped with the DV-270 unloading module. Ready to work. Very low mileage. Manufacturer’s description: Professional binder for perfect softcover. Fully automatic binder with an exceptionally stable type of construction, equipped with a hot glue gluing device, effective also for small and very small quantities of legs or sheets. The Horizon BQ-270V binder is a single-jaw machine with automatic cover feeding, which, operated by one person, delivers impeccably bound books in consistently high quality. Standardly equipped with a scanner measuring the thickness of the insert, it allows you to glue books using the „on demand” technology. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm with a maximum number of copies up to 500 books/hour. Factory-built cutter with additional cutting knives. Maximum milling depth up to 3 mm. Automatic cover feeding using a suction drum with a certain, constant setting relative to the bound sheets. A factory-built installation creating 4-fold creases on the cover, which is set automatically with precise adjustment. As an option, 6 creases can be installed for gluing books with bookmarks Lodpfx Agoziyqfstehk

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Ledpfsziyrvex Agtjhk Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar Lhedoyyqnfepfx Agtjk (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread Lsdpfx Aszbunkogtshk 7 bar Extraction air velocity: approx. 30m/sec

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears, sheet metal shears, profile steel shears, hand lever shears -Manufacturer: VEB, Hand lever scissors type ScDH 5 -Cutting insert length: 200 mm -Cutting capacity: 5/7 mm -Lift-down device: infinitely adjustable -Dimensions: 470/120/H1270 mm -Weight: 28.1 kg Lhodpfsx Ehlpsx Agtjk

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Lhodpfxji Riwxj Agtek Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening Lsdpfx Aei Riywegtehk

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Ledpfx Aei Riy Tegtehk Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Lhodpfx Aoi Ri I Negtsk Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Lhsdpfx Agei Ri Nxstok Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!