Used Knuth Guillotine Shear - Kmt M 1303 for sale (71,620)

Condition: excellent (used), Technical data: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 16.0 mm Motorized adjustable backgauge: 1050 mm Motorized adjustment of cutting gap Ijdpfoyapbiox Apcoia Motorized cutting angle adjustment: 0.5 – 4° Working height: 860 mm Motor power: 18.5 kW Side safety guard with rear light curtain Dimensions (L x W x H): approx. 4650 x 2200 x 2050 mm Weight: approx. 13 tons Condition: Very good condition Blades 80%, cuts sheets 1 – 16 mm The seller assumes no liability for typographical or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, actuation type: electric, working width: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 4 mm, input voltage: 380 V, input frequency: 50 Hz, total width: 4,300 mm, total height: 1,800 mm, number of support arms: 2, year of last overhaul: 2026, Equipment: documentation/manual, type plate available, SCHIAVI-AMADA GH540A guillotine shear, fully operational and ready for use, complete with sheet metal evacuator and programmable positioner ENC1 TASK. Ijdpfx Apsyf H Uwjcsia

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Iijdpfxstvb Iuo Apcea Very good cutting results, including with thin sheet metal

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm Iiodpodzd Huofx Apcsa -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail Ijdpfx Aot Rl Ulspcoia -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm Iiedpfjcn Shqox Apcsa -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives Iiodoctyq Ajpfx Apcja -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Condition: used, Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 Iisdpeharulsfx Apcja -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Year of construction: 1970, condition: used, Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench Iodpfx Asd E R R Sepceia -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Year of manufacture: 2002 Isdpfx Aex Td Aijpcoia

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW Iedpfx Apjx S Ed Eocoia - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Iiodsych Imspfx Apcoa Max. sheet thickness (S235): up to 12.0 mm Max. sheet length: 3200 mm Cutting angle: 2° Strokes per minute: 6–20 Back gauge travel: 600 mm Motor power: 15 kW Length: 4000 mm Width: 2100 mm Height: 2100 mm Weight: 9500 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Technical specifications Max. sheet thickness (S235): up to 8.0 mm Max. sheet length: 3200 mm Cutting angle: 1.5° Strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 6400 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Adjustable blade gap Iijdpfxeych Ias Apcja Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, control type: CNC control, actuation type: hydraulic, working width: 4,080 mm, sheet thickness (max.): 6 mm, overall weight: 103,000 kg, Cizalla Beyeler with CNC control: Automatic backgauge adjustment Automatic cutting length adjustment Automatic cutting angle adjustment Iisdpex E Awcjfx Apcja Automatic sheet thickness adjustment

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Ijdoyg Id Aopfx Apceia Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision Iijdoyg Ic Espfx Apcja NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Condition: new, Year of construction: 2025, – Capacity 1360 x 3 mm – NC back gauge – Small cut sheet metal pieces are automatically ejected at the front of the machine – Safety light barriers at the rear – Front sheet metal supports – Cutting line illumination Iiodpfox Izkajx Apcoa – Foot operation – Emergency stop – 400V

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm Iiodpfx Apexdr R Tjcoa - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm plate thickness: 4,5 mm Iiedpfegnywuox Apcoa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Iodpfxsxawbio Apcsia Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm Iiedpfx Asxmvl Topcsa LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: Iisdpfx Apsx I I Uxjcsa - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: good (used), functionality: fully functional, Year of construction: 1980, Used Safan guillotine shear Type VS 310 6 Iedpfxexzga Rj Apceia Capacity: 3100 x 6 mm Electric back gauge Manual adjustment of cutting angle and blade gap

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Type: VS 255 4 Capacity: 2550 x 4 mm Ijdpoxzf Sljfx Apcsia Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Iijdpsq A I Upefx Apcoa Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition