Used Komatsu Wa470-8 for sale (36,089)

Condition: ready for operation (used), Year of construction: 2022, An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement. Ijdpfx Anozlkaps Isbc

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,473 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork carriage width: 920 mm, fork length: 1,000 mm, empty load weight: 3,501 kg, total length: 2,100 mm, drive type: Elektro, construction width: 1,130 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 352 mm Ibsdpfx Aez If Abon Ioc ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 140/55-9 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2020 Double auxiliary hydraulics, side shifter, full free lift, battery 11/2020, charger, 2 work lights (front)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,025 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 3,703 kg, total length: 2,250 mm, drive type: Elektro, construction width: 1,150 mm, Electric four-wheel forklift Load center: 500 Ibsdpfx Ajz If Azsn Ijc Fork width: 120 mm Fork thickness: 35 mm ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/500-10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 16x6-8 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2016 Additional single hydraulic circuit + 4th valve, side shifter, battery, charger, cabin with heater, blue spot light, full free lift, 2x front work lights, 1x rear work light.

Condition: used, Year of construction: 2000, Machine description This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Ibsdpfx Anjz H Ny Ij Isc Key features / Advantages Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Height: 130 Length: 80 Depth: 160

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed gearbox with splitter. Differential locks, central locking, Ibedpoz H Eg Refx An Ioc radio/CD, ABS, engine brake, trailer hitch with air, power, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacon, metal bumper, rear wall with window, toolbox, air filter positioned above. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== ==Daily purchase of commercial vehicles, as well as trade-ins possible== Price: 24,800 EUR net.

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed transmission with splitter. Differential locks, central locking, radio/CD, ABS, engine brake, trailer hitch with air, electricity, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacons, metal bumper, rear wall with window, toolbox, air filter facing upwards. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== ==Daily purchase of commercial vehicles, as well as trade-ins possible==. Price: 24,800 EUR net. Ibodsz H Ehbjpfx An Isc

Condition: reconditioned (used), functionality: fully functional, empty load weight: 119 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS-E 8/16-4M 12kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 299 hours of operation. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heater power [kW]: 12 Connection power [kW]: 17.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 119 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Ibjdpfozrxh Iex An Ijc Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, Liquid filler that fills eight packs at a time This filler doses liquid, such as brine or sauce, through eight filling heads at once into jars or tubs. The liquid comes from the large hopper on top, and the volume in millilitres is set per programme on the touchscreen. The control currently holds programmes for cucumber and for a second product ("Farmer"). The menus are in Dutch and there is a separate cleaning programme. We found no rating plate on the machine, so the make and year of manufacture are unknown. It stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Ijdpfxez Ndb Sj An Iebc Type: Volumetric liquid filler Filling heads: 8 Dosing: Adjustable in ml per programme Controls: Festo touchscreen, Dutch menus Cleaning: Separate cleaning programme Construction: Stainless steel, hopper on top, on castors

Condition: used, Year of construction: 2007, functionality: fully functional, ECRM MAKO 8 CTP — Specification | MAKO 8 Type | CTP 8-page Laser Technology | Violet 405 nm, single beam - 120Mw Compatible Plates | Violet photopolymer and silver halide Maximum Plate Size | 824 × 1,143 mm Minimum Plate Size | 254 × 254 mm Plate Thickness | 0.15 to 0.30 mm Ibjdpezxzm Tjfx An Isc Resolutions | 1,800 to 3,556 dpi depending on the media Productivity | Up to 15 8-page plates/hour at 2,540 dpi Reported Repeatability | 0.025 mm typical over 6 consecutive separations Positioning Accuracy | ±2 µm with the Precision Drive System Image Scaling | 85 to 110% Workflow | TIFF 1-bit compatible via CtServer Output | Online connection to processor The machine therefore accepts a very wide range of formats, from 254 × 254 to 824 × 1,143 mm, which allows it to handle both small formats and genuine 8-page plates. Exposure/Mechanical Section The MAKO 8 uses a 405 nm violet laser. ECRM states that the single beam can be calibrated according to the sensitivity of the plate. The maximum resolution of 3,556 dpi also allows for the use of demanding screening techniques, including stochastic screening. The system is mechanically quite interesting: the plate is positioned on a pin-bar registration system and then moved under the laser head by the Precision Drive System. The documentation specifies a positioning control of ±2 µm. The registration system is interchangeable to accommodate notches corresponding to the presses used, which aims to improve plate/press registration and reduce setup time. Dimensions and Installation Width: 1,066.8 mm Depth: 2,448.6 mm Total Height: 1,892.3 mm Weight: 409 kg Power Supply: 100–240 V single-phase, 50/60 Hz Maximum Power Consumption: 250 W / 3 A Thermal Dissipation: 850 BTU/h Operating Temperature: 17 to 30 °C Relative Humidity: 45 to 65%, without condensation

Condition: excellent (used), A) SINGLE SIDE EDGE BANDER (Left) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 20 Panels thickness (min/max) mm 8 - 60 Numerical Control POWER Control PC 22 Spraying unit (Antisticking liquid) Infeed fence, adjustable by N.C. Panels infeed system Pre-milling Unit (vertical joint trimmers) adjustable by N.C. type KAL 300 (Kw 3 x 2) Glueing Unit (P.U.R. Glue + Quick Melt unit) PU 34 / QA 34 Ibedpfxozx Eh Is An Ijc Band Pressure zone (adjustable by N.C.) "C" Edge coils supporting unit, N° 6 reels Snipping (endcutting) unit HL 86 Servo (Kw 0,4 x 2) 35 m/min Rough Trimming unit Optimat (Kw 1,5 x 2) Fine Trimming unit ALUKANTE (Kw 0,4 x 2) adjustable by N.C. Spraying Unit (for sliding liquid) Multi Function Unit (Profile contour Trimming unit) FK 13 Servo (Kw 0,4 x 2) Profile edge scraping unit (Multiprofile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) B) Workpieces Return system "LIGMATECH" ZHR 05/L/095

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,700 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China Ijdpfxsztpmwj An Isbc 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: ready for operation (used), Mitsubishi FX784B-8 circuit board, model BN624A535H01, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iodpfx Anjz Ivwve Iobc

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub Ibsdpfx Anjyb Sx Ts Iec no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Ibjdpfx Anez N Np Ae Ioc

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Ibodsz N Nrdepfx An Ijc Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. Isdpfx Anjz N Nrks Ijbc The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Isdoz D Efnspfx An Iebc Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Year of construction: 2018, Used, working condition unit. Additional details including pricing upon request. Ibsdpfx Anoz Hlhhj Ijc

Condition: used, mileage: 90,000 km, power: 81 kW (110.13 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 8, total length: 5,080 mm, total width: 1,956 mm, total height: 1,935 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Renault Trafic Life with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6d standard * First owner * Maintained according to service schedule * M1 passenger car registration Equipment: Ibodpfx Ansz E Aqwe Ijc * Life trim level * 8 seats (2+3+3) * Air conditioning front + rear * Cruise control * LED headlights * Rear parking sensors * Style package * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3000KG * Unladen weight: approx. 2100 KG * Payload: 900 KG * Trailer load: 2000 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transit license plates (5-day / customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior. * If necessary, paint correction and Smart Repair. All of our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you 24/7. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at: Special equipment: Armrests for rear seat(s), parking aid rear, window in the cargo/passenger compartment: - sliding, left, rear wing doors with glazing (opening angle 180 degrees), clear view package, spare wheel in driving condition, sliding door cargo/passenger compartment right with sliding window, style package, radiator grille with chrome trim, exterior mirrors in vehicle color, bumpers in vehicle color, rear glazing tinted, auxiliary heating Additional equipment: Airbag passenger side, airbag driver side, traction control (ASR), audio system: radio CONNECT R&GO, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, battery 85 Ah, floor covering: rubber in the driver's cab, floor covering: rubber in the cargo/passenger compartment, on-board computer, rev counter, automatic headlight activation, electronic brake force distribution, luggage compartment cover / roller blind, illuminated glove compartment, glove compartment with cooling function, heated rear window, rear window wiper, interior: air vents chrome look, interior filter: pollen filter, body/structure: standard van, instrument cluster digital, fuel tank: 80 liters, steering column (steering wheel) adjustable, model update (2), engine 2.0 liters - 81 kW BLUE dCi diesel FAP KAT, rear fog light, wheelbase 3098 mm, low emissions according to exhaust standard Euro 6d, seat cover / upholstery: fabric, seat cover / upholstery: fabric Java, seats in the driver's cab: passenger seat comfort, 3-way adjustable, seats in the driver's cab: driver's seat comfort, 3-way adjustable, seats in the driver's cab: lumbar support passenger single seat, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, seats in the cargo/passenger compartment: 3rd row, 3

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Iedjz E Ht Nopfx An Ijbc CONNECTION 1 1/2 NEW/USED USED

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 13,575 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,120 mm, fork length: 1,350 mm, empty load weight: 4,520 kg, total length: 2,650 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: Pin-type Mast type: Standard Transmission: Automatic Technical condition: good Ibedpfx Ansz Hnuwe Ioc Front tire type: Pneumatic Front tire size: 2 x 7.00-12 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 2 x 6.00-9 Rear tire condition: 80 - 100% Battery year of manufacture: 2015 Triple auxiliary hydraulics, integrated fork positioner with side shift, hydraulic fork extension (integrated), load guard, full cabin, heater, air conditioning, hydraulic fork extension (integrated), blue spot, dust protection, gas tank, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 work lights at the front.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,255 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,530 mm, fuel type: gas, mast type: duplex, construction height: 2,140 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 2,980 kg, total length: 2,350 mm, drive type: Treibgas, construction width: 1,050 mm, Internal combustion forklift Load center: 500 ISO class: FEM 2 A Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 6.50-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 5.00-8 Rear tire condition: 80 - 100% Ijdoz Hnu Djpfx An Iebc Battery year of manufacture: 2018 Additional hydraulic circuit, integrated side shifter, cabin with heater, double pedal, 2 work lights at the front, 1 work light at the rear.

Condition: as good as new (ex-display), functionality: fully functional, sheet thickness (max.): 8 mm, overall weight: 6,500 kg, Used plate shear from Luther Werke. Capacity: 2500 x 8 mm Deep throat: 50 cm Sold as is, where is. Ibsdpfsz Hbtgsx An Ijc Weight: 6500 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, Spring manufacturing machine with a motorized coiling unit, brand AMB, with a capacity of 1.3 tonnes, and including tooling. The sorting box and camera shown in the video are not included in the sale. €160,000 has recently been invested in its maintenance, so it is in very good condition. Price upon request. Isdez Ayukspfx An Iobc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8FBE16T-15590, Year of construction: 2021, operating hours: 10,285 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,300 mm Free lift: 1,580 mm Overall height: 2,120 mm Load capacity: 1,600 kg MACHINE DETAILS Mast type: Duplex Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 48 V Iodpfsz I Ng Dsx An Iobc Operating hours: 10,285 h EQUIPMENT Side shifter 3rd valve External reference: SL15676SLO