Used Löw Lathe-Conventional-Electronic for sale (19,720)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Bwedpfewcfgbsx Ad Asl Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Bjdpfsv Nw Npex Ad Aswl Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Bedpfx Aswwaruod Aswl Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Bwodpfx Asvzln Red Ael engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V Bwjdpfx Adjw Iqume Ael -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control Bwsdpfx Ajrtrlzod Aol 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, XYZ CT 65LTY (Live Tooling & Y Axis) Siemens 828D Control Manufactured & Installed in 2022 Hydrafeed Multifeed Short Magazine Bar Feed Bar Support Unit VDI Live Tooling Holders Supplied Swarf Bin Supplied Bedpoyvqfpofx Ad Aewl Machine Stroke: Max’ Swing 400mm Max’ Turned Dia’ 220mm Max’ Turned Length 490mm X Axis Travel 220mm Y Axis Travel 70mm (+/-35mm) Z Axis Travel 500mm Spindle: Spindle Nose A2-6 Spindle Bore (Drawtube Capacity) 65mm Spindle Speeds to 4,000rev/min Spinlde Motor 17kW Feeds: Rapids 20m/min Cutting 10m/min Slideway Type Hardened Boxways Turret: Turning Tool Shank 20 x 20mm Turret Type VDI 30 Power Turret No. Of Stations 12 Live Tool Max 4500rev/min Max’ Borning Bar Dia Ø32mm General: Tailstock MT4 Quill Dia’ 75mm Coolant Tank Capacity 80l Coolant Pump Delivery 30L/min Machine weight 4.4ton Footprint 3,300 x 2,270, 2,270mm/min Power Requirements 45amp Supplied with: Hydraulic 200mm 3 Jaw Power Chuck Hainbuch Collet Chuck & Collets Sauter ‘German’ VDI Turret Parts Catcher Through Tool & Flood Coolant Remote Electronic Handwheels USB Ports Networking Renishaw Automatic Tool Setting Arm Swarf Conveyor & Bin Programmable Hydraulic Tailstock For Sale Jet Machinery Ltd Jet Machinery Stock No: #79163 Machine Serial Number: STP20155 Cost: £72,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Bwjdpfoyvqdfsx Ad Aol Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Bsdpfjv I T Ewjx Ad Aswl Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Bwsdpfx Adsyaywho Ael Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Bedpow Hb T Sjfx Ad Aswl Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Bwedpfx Adsx D Uf Ts Ael 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Bwedpfx Aext Ibyod Ael Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm Bwodew Rrzajpfx Ad Ajl 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Bsdpfoy Idbzjx Ad Ajwl Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 42L09420, Hankook Protec 9NC x 5000 CNC Lathe with Fanuc 32i Control and large spindle bore. MACHINE CONSTRUCTION & FEATURES  Heavy One Piece Cast Iron Bed Construction  Heavy Duty Hardened & Ground Solid Slideways  2 Step manual Gear Change  Heavy Duty Tailstock MACHINE CAPACITIES Swing Over Bed Ø 950 mm Swing Over Carriage Ø 630 mm Chuck Size Dia. Ø 32” Distance Between Centres 5000 mm Load Capacity Between Centres 5000 Kgs SPINDLE Speed 2 -630 Rpm Spindle Bore Ø 254 mm Spindle Nose A2-15” Speed Range Manual 2 Step Centre taper MT #6 Carriage Toolpost Automatic V8 Tool Size 32 x 32 mm X Axis Travel 535 mm Z Axis Travel 4845 mm X Axis Rapid 4 M/min Z Axis Rapid 6 M/min TAILSTOCK Quill Diameter Ø 180mm Spindle Taper MT #6 Max Quill Travel 250 mm BED Width 630 mm Length 6715 mm MOTORS Spindle 30/37 Kw Feed X 1.8 Kw Z 4.2 Kw POWER SUPPLY Electrical Supply 415V, 3Ph, 50Hz DIMENSIONS & WEIGHT Length 7470 mm Width 2205 mm Height 1890 mm Weight 10280 Kgs STANDARD MACHINE FEATURES • Fanuc 32i-A CNC Controller • Centre MT #6 • 4 Jaw Independent chuck • Automatic Spindle Shifting • Built in Live Tailstock Spindle • Coolant System • 2 Speed Tailstock Spindle • Work Light • Main Drive Motor & Elect equipment • Centre Sleeve • Chuck Cover Full Rear Guard 5000 between Centres 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) Steady Rest(Roller Jaw) Φ250mm - Φ450mm Steady Rest (Roller Jaw) Φ450mm - Φ650mm Live Centre MT #6 Automatic Index Turret Electric V8 in lieu of manual H-4 3 Off OD Tool Holders 3 Off Boring Tool Holders Φ63mm 2 Off Facing Tool Holders Boring Bar Device Ø 150mm (Bar Excluded) Bwjdswcq Tmepfx Ad Ajl Chip Conveyor 5000 Mm Transformer CE Specification Spindle Motor Upgrade 30/37 Kw Fanuc Option A (as detailed below) 1st Spindle Orientation Dynamic Graphic Display Continuous Threading Custom Macro B Extended Part Program Edit Tape Memory 320M Inch/Metric Conversion Manual Guide i Playback Programmable Data Input Run Hours & Parts Counter Tool Offsets 32 Pairs Variable Lead Threading Graphic Function Spindle Positioning Program Restart External Data Input

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm Bwodey H Hc Espfx Ad Ael LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 6,000 kg, first registration: 10/2011, total width: 2,550 mm, color: red, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - Central lubrication system = Further Information = Axle configuration Rear axle 1: Max. axle load: 12,000 kg; steered; Axle brand: PENDEL ASSEN Rear axle 2: Max. axle load: 12,000 kg; steered; Axle brand: PENDEL ASSEN Rear axle 3: Max. axle load: 6,000 kg Rear axle 4: Max. axle load: 6,000 kg Weights Unladen weight: 16,860 kg Payload: 30,140 kg Gross vehicle weight: 47,000 kg Functional Loading platform height: 40 cm Maintenance, history and condition APK (Roadworthiness inspection): valid until 03.2027 Technical condition: very good Visual condition: very good Bodpfxeywy D Rj Ad Ajwl Identification Registration number: OR-74-JL FAYMONVILLE STBZ 2VA EXTENDABLE LOADING PLATFORM PLATFORM DIMENSIONS: 680 CM LENGTH + 520 CM EXTENDABLE (TOTAL 1,200 CM) PLATFORM WIDTH: 254 CM, EXTENDABLE TOTAL PLATFORM WIDTH: 299 CM CATWALKS LUBRICATION OUTRIGGER SLOT: 250 CM LONG, 600 CM WIDE ELECTRIC/HYDRAULIC POWER UNIT REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: excellent (used), Year of construction: 2019, operating hours: 1,982 h, lifting height: 210 mm, fuel type: electric, fork length: 2,350 mm, total height: 1,400 mm, color: other, GVW: 952 kg Lifting capacity: 2.500 kg Bsdpfsy I Abgjx Ad Ajwl FUNCTIONS LIKE NEW! New battery cells 24V 4PzS 620Ah with central filling system, 220V high-frequency charger, Gppd wheels, Tandem forklift wheels, Power steering, Well maintained!

Condition: used, axle configuration: > 3 axles, first registration: 01/2016, loading space length: 9,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, total length: 13,570 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 7,370 mm, color: yellow, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Lift axle - Toolbox = Remarks = APK / TUV / MOT: 03-2027 Broshuis 4ASD-18-40/1 2 x self-tracking axles. 2 x lift axles. Eco ramp operates on 24V. Loading bed: 920 + 317 cm extendable. Loading height: 90 cm (87 cm loaded) Total length: 1350 cm. = Further information = Axle configuration Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Bwodpoyy H Stefx Ad Asl Rear axle 1: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 2: Twin tyres; Tyre tread left inner: 30%; Tyre tread left outer: 50%; Tyre tread right inner: 30%; Tyre tread right outer: 50% Rear axle 3: Twin tyres; Steered; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 4: Twin tyres; Steered; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Weights Unladen weight: 11,600 kg Payload: 54,400 kg Gross vehicle weight (GVW): 66,000 kg Maintenance APK (periodic technical inspection): valid until 03/2027 Identification Type number: 4AOU-16-40 / 4 AXLE / ECO RAMP / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information but no rights can be derived from these published texts.

Condition: good (used), mileage: 638,000 km, Year of construction: 2019, Scania R450 NGS 6X2 Machinery Transporter / Low Loader Truck Euro 6 Automatic - Full Air Suspension - 2019 638,000 km, MOT until 12-2027!! Dutch registration Length: 790 cm Width: 254 cm Height: 116.5 cm Payload: 14,017 kg Bwedpfx Aox Hylyed Aol Ongoing stock, see website for availability. Prices are ex Nuland. Video available via Whatsapp. Financial lease? Ask us about the possibilities. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices under AS-IS conditions without warranties. (see our general terms) For a viewing and/or test drive, you are welcome to make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 150 mm, spindle bore: 51 mm, turning length: 750 mm, turning diameter: 320 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total length: 2,450 mm, total width: 1,668 mm, total height: 1,825 mm, travel distance cross slide: 150 mm, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, travel distance Z-axis: 700 mm, Equipment: rotational speed infinitely variable, Machine is still in good working condition and can be inspected under power. Additional options & accessories: - Bison 3-jaw chuck Ø200mm - Various MK reducing sleeves - Drill chuck - Original documentation Weight & dimensions: - 2000 kg Bwedpfx Ajy Iwhbsd Aol - 2450 x 1668 x 1825 mm (LxWxH)

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg Price: On request In very good condition. In 2017 Refurbished for €32.000 Bsdoy Ivx Eopfx Ad Aewl - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), mileage: 96,788 km, power: 130 kW (176.75 HP), first registration: 03/2017, fuel type: diesel, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 3,100 kg, permissible axle load (axle 2): 5,100 kg, Year of construction: 2017, Equipment: AdBlue, tail-lift, = Further Options and Accessories = - Rear work lights - Front work lights - Windshield - Automatic heating system = Remarks = Renault D 4x2 Box - Loadlift - Low Mileage - Euro 6 - 130 kW - 7,500 kg - Air conditioning MY: KM: 96,788 VF6WTAG40G2453935 Box dimensions: 553 - 238 - 230 Zepro loadlift Euro 6 Automatic gearbox Air conditioning = Further Information = Axle configuration Tire size: 205/75R17.5 Front axle: Max. axle load: 3,100 kg; Steering; Tire tread left: 70%; Tire tread right: 70% Rear axle: Dual tires; Max. axle load: 5,100 kg; Inner left tire tread: 70%; Outer left tire tread: 70%; Inner right tire tread: 70%; Outer right tire tread: 70% Weights Unladen weight: 4,795 kg Payload: 2,705 kg Gross vehicle weight: 7,500 kg Functional Tail lift: Zepro, rear gate Bwodpsyngx Iofx Ad Aol Condition Technical condition: good Visual condition: good Further Information Contact VAEX The Truck Traders for more information.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 6,700 kg, permissible axle load (axle 2): 6,700 kg, permissible axle load (axle 3): 6,700 kg, first registration: 10/2008, total width: 2,990 mm, color: black, Year of construction: 2008, Axle Configuration Rear axle 1: Max. axle load: 6,700 kg Rear axle 2: Max. axle load: 6,700 kg Rear axle 3: Max. axle load: 6,700 kg Rear axle 4: Max. axle load: 6,700 kg Rear axle 5: Max. axle load: 6,700 kg Rear axle 6: Max. axle load: 6,700 kg Weights Unladen weight: 32,080 kg Payload: 67,919 kg Gross vehicle weight (GVW): 99,999 kg Functional Extendable body: Yes Condition Technical condition: Good Bwsdpoyrnx Djfx Ad Aol Visual condition: Good Identification Registration number: ZZ-83-87 NOOTEBOOM EURO 2+5 LOW LOADER 2-AXLE DOLLY 5-AXLE LOW LOADER HYDRAULIC PENDLE AXLES HYDRAULIC DETACHABLE NECK WITH CYLINDERS LOAD PLATFORM LENGTH 800 CM + 400 CM EXTENSION, TOTAL PLATFORM LENGTH 1,200 CM, WIDTH 300 CM + 2X 25 CM EXTENDABLE, TOTAL 350 CM SMALL BED WIDTH 135 CM + LENGTH 825 CM, 2X SIDE EXTENSIONS, TOTAL PLATFORM WIDTH 345 CM PLATFORM HEIGHT 65 CM EXCAVATOR BRIDGE 680 CM X 95 CM X 55 CM LASHING EYES CENTRAL LUBRICATION SYSTEM REMOTE CONTROL TYRE SIZE 285/70/R19.5 TECHNICAL GVW 99,999 KG FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH