Used Leifeld Spinning Machine Leifeld Spinning Moulds for sale (66,800)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION UNILOY MORETTI Godpfx Afsvmd Nwsuokc RETROFITED WITH NEW SIEMENS CONTROLS MACHINE IS WORKING DAILY PRODUCTION FOR TECHNICAL AUTOMOTIVE PARTS MACHINE WAS OVERHAULED IN COMPLETE WITH NEW OPERATIONAL SYSTEM IN 2022 MAIN TECHNICAL DATA - Installed power 130 kW - Heater power 32 kW - Auger diameter 70mm - Power of auger motor 45kW - Closing force 150kN - Plate 450x550 - Closing plate opening from 320 to 620mm - Head volume 3l

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle Gkodpfxjzlutms Afujc - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: excellent (used), CATALOGUE NUMBER: 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between extreme spindles: 900 mm - Spindle spacing pitch: 32 mm - Table surface area: 700x1220 mm - Height to table: 930 mm - Pneumatic clamps: 3 pcs - Vertical and horizontal drilling + angled drilling - Pneumatic table adjustment for vertical and horizontal operation - Pneumatic lifting of the drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES Gkedpfezwpaxex Afujc – Made by the Italian brand SCM – For 29 drills – Unpainted – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1370 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request. Gsdpfxjzy Spuj Afuskc

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Gkedpfx Afeymn Nfousc Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 2.000 mm z-travel 550 mm Control Siemens number of spindles 4 Stück Pneumatics 5,5 bar weight of the machine ca. 28 t The machine has undergone an extensive overhaul. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and Gkjdpfx Aszwg Utofuoc prior sale.

Condition: good (used), functionality: fully functional, heads set: right/left/top/top spindles span 32mm motors 1,1kW heads with 5 spindles Gkedpezz N R Sefx Afuoc max heads span 2,5m pneumatic clamps regulation of drilling speed

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Gedpsy Tt Rpofx Afuekc Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Gjdewh Sh Nepfx Afuokc Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Gksdjz Dkwvepfx Afusc Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Gkjdpfsz Nd Iaex Afujc Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar Godpfx Aehy Nnbofuokc This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm Gkjdpfxjzuk Aio Afusc - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of the feed cylinder (drilling depth adjustment): 50 mm - Drilling speed: pneumatically adjustable - Drilling angle: manually adjustable - Main motor: 1.5 kW - Side fences: 400 mm - Compressed air requirement: 6-8 bar - Diameter of the dust extraction nozzle: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES - Made in Italy - For 21 spindles – drill mounting with quick-release couplings - Vertical, horizontal, and angled drilling - Unpainted - Used drill press, very good condition Net price: 6900 PLN Net price: 1600 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) Gsdpfx Aowifd Hofuskc

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] The main features of the machine in the image: Gedpfx Afsz Ef R Tjuekc Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Gkodpfewh S E Usx Afujc Tool holder type: spring/clamp chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Gkjdjxbq Ulspfx Afusc Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 33,250 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC-620, overall weight: 8,500 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 3/5-axis machining center Manufacturer: Spinner Type: VC-1150 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 33,250 h S/N: VTXXXX Technical parameters: ----- • Travel ranges X-Y-Z: 1,150 x 620 x 600 mm • Work table: 1,400 x 620 mm • Max. workpiece weight: 1,500 kg • Spindle: 18,000 rpm Gkjdpfxez D Ak Us Afujc • Magazine: 60 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, • Paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • 2-axis NC rotary table with four spindles • Chip conveyor • Machine weight: approx. 8.5t • Dimensions: 2,650 x 2,800 x 2,700 mm Accessories: ----- • Documentation

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Gkodezvmvhspfx Afujc Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units Godpfxoxrmpto Afuskc - 2 vertical units - 4 front-mounted units (two on each side)

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Gksdpfx Afodqzh Rouec Dust extraction port diameter: 2 x 120 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Gedpfow Hfd Isx Afuskc Technical data: - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to table surface: 900 mm - Feed cylinder stroke: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling unit adjustment, pneumatic - Main motor: 1.5 kW Gkodpfozr U Ecox Afujc - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES - For 21 spindles – drill bit mounting with quick-release couplings - Vertical, horizontal and angled drilling - Unpainted - Used drilling machine, very good condition Net price: 7900 PLN Net price: 1840 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Gkjdjzxg Ivspfx Afuec

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Gsdpfx Afewifdgjuekc Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)