Used Lissmac Sbm-S 1000 for sale (73,481)

Condition: used, Year of construction: 2008, operating hours: 5,139 h, machine/vehicle number: 1200017639, fuel type: diesel, Empty weight: 15.050 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Front tyres / undercarriage remaining: 50 Pgodpsx Am I Dsfx Ag Dsk Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: good (used), CALIBRATING SANDING machine model LEVIGALTECNICA MIKRO SRTV/C1000 Podotlplxspfx Ag Degk second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Condition: used, functionality: fully functional, pressing force: 1,000 t, Cavenaghi & Ridolfi 1000-ton hydraulic press, Italian-built machine, suitable for industrial pressing operations and also used as a die tryout press. According to the nameplate, the following data is indicated: Manufacturer: Cavenaghi & Ridolfi Location: Limbiate (Milan), Italy Series: 680429 Pgedpfx Agjyuqm Nj Dek Serial number: 2909 Pressing force: 1000 tons The machine is complete with control panel as shown in the photo.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll Pgedexn Rrqspfx Ag Dek - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: excellent (used), functionality: fully functional, Double-sided glue spreader OSAMA S2R-1000 Working width: 1000 mm Min./max. pass-through height: 0-90 mm Diameter of applicator rollers: 185 mm Feed speed: 18 m/min Pgsdpfjyvpkwsx Ag Dek Motor: 0.37 kW

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Pgedpoyrc E Esfx Ag Dek

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. Pjdpfx Agjxwvruj Dsgk The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, Year of construction: 2025, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V Pgsdpfxeh Rayts Ag Dek

Condition: good (used), Year of construction: 2016, Equipment: documentation/manual, - CNC wireless remote control - Zero-3 / 5-channel stepper motor controller Pgodpfjyr Efuex Ag Djk - Base frame (mobile on casters) - DELL PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (version 2.50) - Accessories

Condition: used, Year of construction: 1995, turning diameter 1020 mm turning length 4000 mm turning diameter over slide 720 mm control Siemens type 805 tailstock quill taper MT 6 transmission ratio 2 bed width 560 mm spindle bore 200 mm faceplate 1000 mm make Forkhardt PSA 1000 3 jaw chuck Forckrath 500 mm steady 263 mm steady 500 mm dimensions of the machine ca. 7,4x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Pgjdeyqvd Sspfx Ag Dsk

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with SIMODRIVE 611D, overall weight: 6,200 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details. • Current defects: • Measuring probe is defective • Switch in the coolant reservoir for controlling the pump is defective • Axis configuration: 2-axis (X, Z) • Center distance: 1000 mm • Center height: 180 mm • Max. swing diameter: 355 mm Podoymn Ihspfx Ag Degk • Max. workpiece weight: 150 kg between centers; 60 kg in chuck (including clamping device) • X-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–8,000 mm/min • Measuring system: glass scale, 0.0005 mm resolution • Z-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–12,000 mm/min • Measuring system: rotary encoder, 0.001 mm resolution • Workpiece spindle: • Motor power: 2.0 kW • Speed: 0–1000 rpm • Taper: MK5 and KK5 (DIN 55026) • Grinding spindle: • Motor power: 9 kW • Speed: 1400 rpm • Grinding wheel size (standard): 500 × 80 × 203.2 mm • Bearings: precision rolling bearings • Lubrication: lifetime lubrication • Required space: approx. 3900 × 2450 × 1800 mm • Power supply: 400 V, 50 Hz, 3-phase • Control voltage: 230/24 V • Installed power: approx. 23 kW

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, total height: 1,650 mm, overall weight: 1,200 kg, controller manufacturer: FAGOR, controller model: 8055tc, number of axes: 2, This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information. • Turning diameter: 360 mm • Turning length: 1000 mm Pgsdpfx Agsx D Ivfo Djk • Tool changer: 8-fold vdi20 • Machine still under power • chuck: 200 mm in diameter. Dimensions Machine Depth 2500 mm

Condition: ready for operation (used), Year of construction: 2022, operating hours: 7,500 h, Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details. Pgedoyifirspfx Ag Dok • Lasers: 2 x 200 W fiber lasers (multilaser) • Laser operating hours: 7,500 h per laser • Build volume: 100 mm diameter x 100 mm height • Material used: primarily BEGO Mediloy S-Co (Cobalt-Chrome) • Applications: high-precision dental and medical components • Condition: well-maintained; operated in a controlled laboratory environment • Handover: machine handed over at the laboratory gate

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Machine Benefits Qualitative Machine Benefits • Good condition Pedpfsyi Eliex Ag Dogk Technical Machine Benefits • Distance between centres: 1000 mm • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

Condition: ready for operation (used), Year of construction: 2018, This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. • Gap between the upper tool and the bending beam is a maximum of 260 mm • The top tool cannot be segmented • Operating voltage: 400/50 V/Hz • Power: 7.5 kW • Operating pressure: 150 HPa Pgodox D Rf Aspfx Ag Dok • Control type: PLC • Control voltage: 24 VDC • Bending capacity: sheets up to 6 mm thick and 3,000 mm wide • Hydraulic clamping • Two front stops • Programmable rear stops

Condition: new, Year of construction: 2026, SELF-PROPELLED BITUMEN EMULSION SPRAYER BS-1000SP TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move the BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Burner – propane; Psdpfxevpg Izs Ag Degk Hand spraying rod; Self-propelled traction hydraulic wheel.

Condition: new, Year of construction: 2026, Bitumen Emulsion Sprayer BS-1000 Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: - Productivity – 36 l/min. - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod Pgjdpfx Agsvptnuo Dsk

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° Pgsdpfsyn N Ilex Ag Dek -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm -Weight: 106 kg

Condition: like new (used), functionality: fully functional, ES-1000 Spectrophotometer with bag (complete) Pedpfx Agou Ekcle Dogk

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure Pgsdpfxshufige Ag Djk The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Pjdeuk Niyepfx Ag Dsgk Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Year of construction: 2007, condition: excellent (used), Description to follow! Pgjdpfx Ajyrtv Usg Dok

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 Pgsdpfxjvav Sdj Ag Dok tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: new, Ostas 3-roll round bending machine SBM 1070 x 95 Features: Asymmetric 3-roll round bending machine with motor drive Special equipment included in the price: Pedpfx Aegkwimeg Djgk Hardened rolls Motorized rear roller adjustment Digital display Top roller can be swung out Conical bending device Foot switch Technical details: sheet width: 1070 mm sheet thickness: 3,0 mm roll length: 1070 mm Roll diameter: 95,0 mm Smallest bending diameter: 140,0 mm Motor power: 1,1 kW Dimension L-B-H: 1350 x 760 x 1250 mm Weight: 370 kg

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox Pgjdpjqwkd Uofx Ag Dok - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm - Rotating steady rest - passage diam. max. 110 mm - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool