Used Matra D 56.4 for sale (46,811)

Condition: used, functionality: unexamined, Planer with planing shaft at the bottom and top Double-sided planer for producing slats Isdpfx Aoy Ryx Uobyjtk Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Jointing device at the bottom and top Year 1990

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow oil cooler D20V D30V 2 flow oil coolers - coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulation coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow oil cooler, type D 20 V, Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow oil cooler D 30 V Wöhr flow oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. Ijdpfx Abog U H E Sjyotk Subject to typographical errors and omissions in all technical data. We only sell to countries within the European Community.

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Itsdpfx Aewuz S Debysk

Condition: good (used), Year of construction: 2007, machine/vehicle number: 720050, Offer 26083 Technical data: - Center height / Distance between centers 210 / 1500 mm Isdpfxezc Iycs Abystk - Maximum turning diameter over the bed / over the cross slide 420 / 270 mm - Maximum turning diameter with gap bed 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds: - Longitudinal 0.031 - 1.70 mm/rev - Cross 0.14 - 0.784 mm/rev - Travel of the top slide 128 mm - Travel of the cross slide 285 mm - Metric thread pitches - Inch threads - Drive 400 V / 7.5 kW - Including: - Tailstock, 3-jaw chuck, quick-change tool holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Type: HTC 110 50 D Year of manufacture: 2018 Belt width: 110 cm Length: 255 cm Passage height: 47 cm Itodezh Nw Sepfx Abysk New No operating hours 22726

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Iedpfx Aezval Aebyotk Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: excellent (used), Year of construction: 2011, volume flow: 3.21 m³/h, operating pressure: 8 bar, pressure (min.): 10 bar, Boge C 30 D screw compressor With desiccant dryer Itodpoywz Hmefx Abyok 22 kW motor Capacity: 3.21 m3/min Pressure: 10 bar Year of manufacture: 2011 Operating hours: 16,300 hours COMPRESSOR IS IN FULLY WORKING CONDITION. NET PRICE: 14,000,- GROSS PRICE: 17,220,-

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. Itodpfxszvh D Ts Abyek The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Isdpfxozuw Ewj Abyetk Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: excellent (used), Year of construction: 2010, operating hours: 45,000,000 h, machine/vehicle number: 1091, PCS-H Off Press Controls Screen Display PDS-E: Print Density Control Ryobimatic Dampening RPC Semi Automatic Plate Change Baldwin IR/TL Dryer Non-stop Delivery Ink. Temperature Control Grafix: Powder Sprayer Coating System with Doctor Chamber Blade Automatic Blanket Washing Device Automatic Ink Roller Washing Device Automatic Impression Cylinder Washing Device High Pile Delivery All Units with New Rollers from Böttcher Cleaned & Checked & Ready for Printtest Number of Printing Units : 5 Units Number of Coating Units : 1 Coating Unit Print Output Maximum : 15.000 Sheets / Hour Largest Sheet Size X : 520 mm Ijdpfx Abefvvdgoystk Largest Sheet Size Y : 375 mm Min. Sheet Size X : 100 mm Min. Sheet Size Y : 105 mm Largest Print Format (X) : 505 mm Largest Print Format (Y) : 350 mm Max. Paper Strength : 0,6 mm Min. Paper Strength : 0,04 mm Printing Plate Size : 510 x 400 mm Blanket Size : 541 x 437 mm Blanket Thickness : 1.90 mm Technical data can vary according to job, consumables, printing stock and, possible, other factors

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Ijdexxl Nlspfx Abyetk

Condition: used, Year of construction: 2021, operating hours: 538 h, functionality: fully functional, machine/vehicle number: 0503330621, total width: 920 mm, total length: 1,550 mm, total height: 1,300 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, fuel: diesel, overall weight: 725 kg, water tank capacity: 53 l, volume flow: 6 m³/h, noise level: 89 dB, power: 37 kW (50.31 HP), pump capacity: 10 l/min, Equipment: type plate available, used machine – fully functional – standard accessories available as optional extras Itedpfjzizicox Abyek

Condition: excellent (used), Year of construction: 2021, 4-SIDE EDGE BANDING LINE Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: O12044a) Infeed table "HOMAG" Mod. TBL 100/25/12 with motorized rollers O12044b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) O12044d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25) Ijdpfx Absx Aqbhoyetk

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 03/2028, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1. Hand – German volunteer fire department. TÜV (technical inspection) valid until 03/2028. Itedpfx Abew Tpfueysk An expert opinion according to §23 StVZO in conjunction with §21 StVZO as a "vintage vehicle, special-purpose vehicle, fire department vehicle, equipment carrier" (for an H-registration) dated 09.03.2026 from TÜV Rheinland is available. Engine oil with filter / brake fluid / 4x glow plugs / wiper blades completely NEW, replaced in a specialist workshop in 02/2026 with invoice. Directly from the garage, until recently with the original owner, always registered with the original registration document and even the first vehicle registration certificate from 1989. Only 21,000 total kilometers driven. Very well-preserved Bremen Transporter T1 in the medium-length version with the sturdy factory-fitted high roof. Body condition in detail: Only 2 minor rust spots (rear right wheel arch and left side panel). Otherwise, nothing. Not even at the "typical Bremen rust spots"; these are all "clean" on this vehicle and have not been repaired yet. Only the front right wheel arch has been repaired. Normal signs of use are present. The underbody is also in good condition. This 308 D was explicitly sold to us by the original owner as "accident-free". New winter tires (DOT 2022). High 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, it's an absolute basic version. No seat belts. No power steering. No ABS. Simply pure 1980s, when reliable and durable cars could still be built. In any case, not much can go wrong here. Engine: OM 601 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is stated as the maximum speed. A large step extends mechanically when the sliding door is opened. The vehicle was used by the fire department as an equipment carrier and has some shelving units that can be easily removed when not in use. Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as a "Miscellaneous fire department vehicle". Unladen weight: 2320 kg (including all installed equipment). Permissible total weight - unchanged from the original factory specification to this day - 3500 kg. This means that this 308 D-KA can be driven immediately with the new car driver's license. The special signal system was already removed by the fire department before the sale and is no longer present. The vehicle runs very well; the transfer journey on the highway was a pure pleasure. This offer applies only to commercial enterprises or public authorities. Subject to prior sale and errors. The purchase price is the final price, gross = net. Differential taxation according to §25a UStG because it is a vehicle belonging to a public authority. Therefore, no 19% VAT will be added. However, the VAT cannot be calculated separately from the purchase price.

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t Itsdpfezmy Tuox Abyek

Condition: used, Year of construction: 2001, CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Itjdpszmx R Sofx Abyek Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T

Condition: good (used), axle configuration: 3 axles, first registration: 04/1990, loading space volume: 33 m³, suspension: air, color: silver, Year of construction: 1990, Equipment: ABS, Make axles: SAF Brakes: drum brakes Empty weight: 9.330 kg Carrying capacity: 28.670 kg GVW: 38.000 kg Number of compartments: 4 Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = Itjdpfx Aszvcxrsbyjk - Air suspension = Remarks = Van Hool Tank / 33.280 LT / 4 compartments / ADR / Inox ADR : FL- AT

Condition: good (used), Year of construction: 2018, S014839 MANUFACTURER: CREEMERS MODEL: RCA15 D TM500F Serial No.: ITJ187475 Year: 2018 Power (kW): 15 Capacity (m3/min): 1.68 Pressure (bar): 10 Operating hours (loaded/total): 9265 / 14420 Itedpfx Aboxyatneyek Frequency inverter: no Built-in dryer: yes Heat exchanger: no Cooling (air/water): air Mounted on tank: yes, 500 L

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Ijdozrf Nrjpfx Abystk Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 25693, turning diameter: 150 mm, Specifications: Number of Axes: 3 Maximum Workpiece Diameter: 300 mm (approx.) Maximum Workpiece Length: 300 mm (approx.) Chuck Size: 6” (standard, options for larger sizes) Machine Dimensions: 2,400 mm x 2,200 mm x 2,500 mm (approx.) Machine Weight: 3,200 kg (approx.) Spindle Speed: Up to 6,000 RPM (standard) Spindle Power: 15 kW (continuous) Spindle Torque: 75 Nm Spindle Bore: 65 mm X-Axis Travel: 300 mm Itodpfx Abozn Ay Toyjk Y-Axis Travel: 250 mm Z-Axis Travel: 300 mm Rapid Traverse (X, Y, Z): 20 m/min (maximum) Feed Rate: 12 m/min (max feed rate in all axes) Number of Tool Stations: 6 to 12 tool stations Maximum Tool Diameter: 32 mm (in fully populated tool turret) Maximum Tool Length: 100 mm Positioning Accuracy (X, Y, Z): ±0.005 mm Repeatability (X, Y, Z): ±0.002 mm Spindle Runout: < 0.003 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot Itedpszu Irnofx Abyek R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. Itodpfx Asyx N Hqjbyek The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: used, Year of construction: 2009, color: white, overall weight: 16,000 kg, maximum load weight: 13,850 kg, empty load weight: 2,150 kg, loading space volume: 43 m³, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,430 mm, first registration: 06/2009, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41709 Ackermann, interchangeable body * Year of manufacture: 2009 * 7.45 * Used tarpaulin * Edscha / sliding roof * Retractable lashing eyes * Portal door * Profiled wood boards * Telescopic support legs * Ice Protect for ice-free roofs * Heavy-duty lashing eyes * Other * Total weight: 16,000 kg * Unladen weight: 2,150 kg * Payload: 13,850 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7300 mm, W=2470 mm, H=2430 mm * Internal volume*: 44 m² * Dimensions of corner brackets E=5853 mm * Overhang dimensions 799 mm * Pallet spaces: 18 * Current lowering height 1180 mm * Lowering height of telescopic legs adjustable Disclaimer: Subject to changes, prior sale, and errors More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists, we will be happy to advise you. Iedpfx Abezvlmloyjtk

Condition: used, Year of construction: 1993, operating hours: 6,740 h, load capacity: 4,000 kg, lifting height: 4,400 mm, fuel type: diesel, construction height: 2,970 mm, gearing type: automatic, Equipment: cabin, H 40 D front loader with full cab own forklift truck from GLW various repairs, always serviced Total operating hours 6,740 h Lifting height 4.4m Total height 2.97 m Itsdpfx Aeurpwtebyjk Subject to errors and prior sale. Price ex warehouse Riederich.