Used Meba 260 Dg Swing for sale (5,934)

Year of construction: 2007, condition: used, Year: 2007 Condition: good, functional Kolbus DA 260 - Automatic Casemaker Lrjdpfx Asylk Rpoa Rer Technical specifications: - Maximum open case size - 670 × 390 mm - Minimum open case size - 205 × 140 mm - Spine width (joint width) - 4 – 15 mm - Distance between boards - 14 – 120 mm - Closed case width - 8 – 15 mm - Cover material width (paper/fabric) - 223 – 708 mm - Cover material height (paper/fabric) - 130 – 428 mm - Board thickness - 1 – 4 mm - Board width - 95 – 328 mm - Board height - 140 – 390 mm - Center strip thickness (cardboard) - 1 – 4 mm - Center strip width (board) - 6 – 90 mm - Strip thickness (roll) - 0.3 – 0.6 mm Applications: The Kolbus DA 260 is ideal for book production, premium case manufacturing, presentation boxes, and specialty packaging. Its reliability and precision ensure high-quality output with minimal material waste in continuous production.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm Lodpfxjzlpahs Aa Rorr - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Year of construction: 1989, condition: good (used), Selling 2 sinker EDM machines. Lrjdpfx Aaohgrnhe Rsr Complete with filtration, rotary table, tooling, and fume extraction system.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 2,974 h, spindle speed (max.): 2,400 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 1,550 mm, spindle motor power: 4,000 W, total height: 1,850 mm, overall weight: 3,350 kg, controller manufacturer: FANUC, controller model: 0i Mate TC, product length (max.): 3,330 mm, number of axes: 2, Horizontal turning machine manufactured in 2007. This Pinacho Smart-turn6 260 features a distance between centers of 1,500 mm and a maximum turning diameter with soft jaws of 500 mm. It is equipped with a spindle speed of 2,400 rpm and a spindle bore of 80 mm. If you are looking to get high-quality turning capabilities, consider the Pinacho Smart-turn6 260 machine we have for sale. Contact us for further details. Lrsdpszkr Swefx Aa Ror • Distance Between Centers: 1,500 mm • Spindle Bore: 80 mm • Maximum Turning Diameter over Cross Slide: 300 mm • Maximum Turning Diameter with Soft Jaws: 500 mm • Spindle Speed: 2,400 rpm • Spindle Motor Power: 4 kW • Connected Load: 17 kW • Tailstock Quill Diameter: 58 mm • Tailstock Taper: Morse 5 (MT5) • Machine Length: 3,330 mm • Machine Height: 1,850 mm • Machine Weight: 3,350 kg • Chuck Diameter: 260 mm • Documentation: Operating Manual Included • Condition: Good Condition • Service History: Service Maintained • CE Marked Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Lsdpfxox A Ha He Aa Rjrr

Condition: used, Manufacturer: KASTO Model: SSB 260 VA Ljdpfx Aexcnppsa Rerr Max. cutting size: 260 x 260 mm / Diameter: 260 mm Weight: 1915 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Ljdpfx Ajzi Uxdoa Rerr Cutting length min 300, max 4500 mm Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Digital angle display Automatic length positioning Moving roller conveyor Pneumatically foldable support arms Label printer

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung Lsdjzi A Uaspfx Aa Rorr

Condition: used, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, next inspection (TÜV): 06/2028, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, Fiat Ducato L5H2 panel van (now L4H2 in series 9.2 / 10) high-roof 2.2MJ 103kW/140hp, new vehicle in stock, immediately available. Latest model from series 10 (9.2)! Syncom: 295.CG3.2 Paint: 549 white MAXI version with 16-inch tires and large brake system. Towing capacity: 3,000kg. Cargo area dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Cargo volume: 15 m3. Gross vehicle weight: 3,500kg. 0TK Smart tachograph: Digital tachograph (VDO DTCO 4.1). 025 Air conditioning. C7D 7-inch infotainment system with touchscreen, Bluetooth, DAB+, Android Auto, Apple CarPlay. Navigation via Android Auto or Apple CarPlay. RS3 USB interface on the dashboard. C7C “PREMIUM CAB” package with comfort driver's seat - suspension seat. 0XW “Techno” dashboard. 320 Steering wheel and gear lever in artificial leather. 640 Comfort driver's seat, hydraulically suspended with center armrest. 50E Seat base trim. 316 Rear view camera. 245 Radio remote control on the steering wheel. NHR Cruise control with speed limiter. 619 Rear double doors with 260-degree opening. 049 Steel partition. 077 Double leaf spring rear axle. 041 Electrically adjustable and heated exterior mirrors. 508 Rear parking sensors. 835 Storage compartment in the roof. 2QC “Eat & Work” passenger double seat with eating and working function in the middle backrest. 132 Comfort driver's seat with center armrest + lumbar support. 8RS Seat cover black with double stitching and padded headrest (interior color code 076). 500 Driver airbag. 502 Passenger airbag. 5F4 Safety package: Electronic Stability Control (ESC): - Side wind assist - Trailer stability control - Post-collision braking - Rollover prevention - Anti-slip regulation (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC). Safety kit: - Emergency brake assist (pedestrian and cyclist recognition) - Lane keeping assist - Traffic sign recognition - Driver drowsiness detection - Intelligent speed assist. 5EM Headlights, darkened. 4DH 980 Full-size spare wheel with on-board tools. 01P Acoustic pedestrian warning system. Ledpfx Aozlam Eoa Rorr

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato L5H2 panel van (now L4H2 in Series 9.2 / 10) high roof, 2.2MJ, 103kW/140hp, new vehicle in stock, immediately available. Latest model of Series 10 (9.2)! Syncom: 295.CG3.2. Paint: 549 white. MAXI version with 16-inch tires and large braking system. Towing capacity: 3,000kg. Cargo dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Cargo volume: 15 m3. Gross vehicle weight: 3,500kg. 0TK Smart tachograph: digital tachograph (VDO DTCO 4.1). 025 air conditioning. C7D 7-inch infotainment system with touchscreen, Bluetooth, DAB+, Android Auto, Apple CarPlay. Navigation via Android Auto or Apple CarPlay. RS3 USB interface on the dashboard. C7C ´´PREMIUM CAB´´ package with comfort driver's seat – sprung seat. 0XW ´´Techno´´ dashboard. 320 steering wheel and gear lever in synthetic leather. 640 comfort driver's seat, hydraulically suspended with center armrest. 50E seat base trim. 316 rear view camera. 245 radio remote control on the steering wheel. NHR cruise control with speed limiter. 619 rear double doors, 260-degree opening. 049 steel bulkhead. 077 double leaf spring rear axle. 041 electrically adjustable and heated exterior mirrors. 508 rear parking sensors. 835 storage compartment in the roof. 2QC ´´Eat & Work´´ passenger double seat with eating and working function in the middle backrest. 132 comfort driver's seat with center armrest + lumbar support. 8RS seat cover, black with double stitching and padded headrest (interior color code 076). 500 driver airbag. 502 passenger airbag. 5F4 safety package: Electronic Stability Control: - side wind assist - trailer stability control - post-collision braking - rollover prevention - anti-slip regulation (ASR) - hydraulic brake assist (HBA) - hill-start assist - adaptive load control (LAC). Safety kit: - emergency brake assist (pedestrian and cyclist detection) - lane keeping assist - traffic sign recognition - driver drowsiness detection - intelligent speed assist. 5EM darkened headlights. 4DH 980 full-size spare wheel with on-board tools. 01P audible pedestrian warning system. Lrodpfjzlam Ssx Aa Rjr

Condition: used, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, next inspection (TÜV): 06/2028, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato L5H2 panel van (now L4H2 in series 9.2 / 10) high-roof, 2.2MJ, 103kW/140 hp, new vehicle in stock, immediately available. Latest model of series 10 (9.2)! Syncom: 295.CG3.2 Paint: 549 white, MAXI version with 16-inch tires and large brake system. Towing capacity: 3,000 kg. Load compartment dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Load volume: 15 m3. Gross vehicle weight: 3,500 kg. 0TK Smart Tachograph: Digital tachograph (VDO DTCO 4.1). 025 Air conditioning. C7D 7-inch infotainment system with touchscreen, Bluetooth, DAB+, Android Auto, Apple CarPlay. Navigation via Android Auto or Apple CarPlay. RS3 USB interface on the dashboard. C7C "PREMIUM CAB" package with comfort driver's seat - suspension seat. 0XW "Techno" dashboard. 320 Steering wheel and gear knob made of artificial leather. 640 Comfort driver's seat, hydraulically suspended, with center armrest. 50E Seat base trim. 316 Rear view camera. 245 Radio remote control on the steering wheel. NHR Cruise control with speed limiter. 619 Rear double doors, 260-degree opening. 049 Steel partition. 077 Double leaf spring rear axle. 041 Electrically adjustable and heated exterior mirrors. 508 Rear parking sensors. 835 Storage compartment in the roof. 2QC "Eat & Work" passenger double seat with eating and working function in the middle backrest. 132 Comfort driver's seat with center armrest + lumbar support. 8RS Seat cover, black with double stitching and padded headrest (interior color code 076). 500 Driver airbag. 502 Passenger airbag. 5F4 Safety package: Electronic Stability Control - Side wind assist - Trailer stability control - Post-collision braking - Rollover prevention - Anti-slip control (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC). Safety kit: - Emergency braking assist (pedestrian and cyclist detection) - Lane keeping assist - Traffic sign recognition - Driver drowsiness detection - Intelligent speed assist. 5EM Headlights, darkened. 4DH 980 Full-size spare wheel with onboard tools. 01P Acoustic pedestrian protection system. Lrodpfozlancjx Aa Rer

Condition: ready for operation (used), functionality: fully functional, The THIMON SWING PRO 5-sided strapping machine is a state-of-the-art industrial solution designed to provide complete pallet strapping using a single consumable. Thanks to its patented triangular arm technology combined with a motorized rotary table, it performs the packaging of all five sides of the pallet in a single cycle, while guaranteeing excellent load stability. This technology improves the protection of goods against dust, moisture, and stresses related to transport. Designed for the food processing, logistics, pharmaceutical, paper, or manufacturing industries, the WRA-PAL SWING PRO combines a high throughput with reduced stretch film consumption. Its motorized pre-stretch module and 1,000 mm film width allow for a reduction in consumable usage of 20 to 40% while improving load retention. Furthermore, its capacity to accommodate reels up to 100 kg offers significantly greater autonomy than conventional systems and limits production downtime. The machine easily adapts to different pallet sizes thanks to its numerous adjustments. Its cutting and heat-sealing device eliminates film tails at the end of the cycle, while its patented pleated film system reinforces the cohesion between the pallet and the load. In addition, the use of a single film for all five sides guarantees inviolable product protection and improves their preservation during storage and transport. At Europ'Équipement, this strapping machine undergoes a complete overhaul before being sold. Each component is inspected, serviced, and tested to offer manufacturers a reliable, high-performance, and immediately operational solution, while significantly reducing the investment compared to new equipment. Technical specifications: Packaging of all 5 sides with a single film reel Motorized rotary table Lodpezhwfkjfx Aa Rorr Patented triangular arm with mobile linkage Motorized pre-stretch module Film width: 1,000 mm Adjustable pre-stretch: 0 to 350% Reel capacity up to 100 kg Automatic cutting and heat-sealing device Pleated film reinforcing load cohesion Anti-fall system for the stretching carriage Touchscreen operator interface Frequency inverters Programmable industrial controller Adaptation to different pallet sizes Simplified maintenance thanks to optimized kinematics

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm Lsdpfx Aaezii A De Rsrr - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: 1 clamp Milling and Notching Station Spine Gluing Side Gluing Hotmelt Automatic Cover Feeder Lodezkapdepfx Aa Rorr Nipping Station Up to 600 cycles/hour Voltage: 3-phase, 400 V or 230 V 3.3 kW

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h Lrsdpjir Id Usfx Aa Rsr

Condition: excellent (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm Ljdpfozh U N Tjx Aa Rorr -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Lsdpfjzc N Aljx Aa Rjrr Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Ledszc N Aropfx Aa Rerr Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length Lredjfk Ew Ejpfx Aa Rer • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 2004, Overview: Ljdpfxoyb R Rne Aa Rorr Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: - Manufacturer: Dr. Datz Maschinenbau GmbH - Type: BVM 24R - Year of Manufacture: 2004 - Number of Capping Stations: 24 - Closure Type: Wire bail closures - Machine Direction: Left to right

Condition: used, Industrial Twin-Column Band Saw with Roller Conveyor System, KALTENBACH KBS 920 DG, Used machine Manufacturer: KALTENBACH GmbH + Co. KG (Lörrach, Germany) – Market leader in premium steel processing machinery Type: KBS 920 DG Year of manufacture: 2002 (The machine's software has been updated, and compared to its age, it has been retrofitted with a newer PLC and conveyor control system) Condition: Used, in excellent technical condition, fully operational complete sawing line Overall dimensions: (According to the complete conveyor and machine layout) Technical and operating parameters: Lrodezl Ugaopfx Aa Rsr Cutting capacity at 90° (Width x Height): Max. 920 x 500 mm (ideal for large HEA, HEB, IPE beams) Cutting capacity at 60°: 820 x 500 mm Cutting capacity at 45°: 670 x 500 mm Mitre cutting range: Infinitely adjustable in both directions (NC-controlled angle setting) Saw band dimensions: 7290 x 41 x 1.3 mm Band speed: Infinitely variable (frequency-controlled) Saw frame feed: Hydraulically controlled, infinitely variable adjustment Material clamping: Horizontal and vertical hydraulic vice system ensuring vibration-free clamping during cutting Control system: Modernized, upgraded software program and PLC control system relative to its age Integrated Material Handling Roller Conveyor System: Infeed roller conveyor: 28 meters long, automatic feeding into the saw, with full longitudinal and transverse movement (equipped with lateral chain/roller cross-transfer units for loading raw materials) Outfeed roller conveyor: 19 meters long, automatic discharge of cut finished products, with full longitudinal and transverse movement for lateral buffering and sorting of finished parts

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: Ledpfxezh Dqyo Aa Rerr X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1982, Band saw with miter cutting device, manufacturer: HESKA, type: HSE 260, year of manufacture: 1982. Lsdpfxszictcs Aa Rsrr The machine has been partially overhauled and includes a support stand, machine documentation, and a coolant system. Sawing capacity for round stock: max. 260 mm.

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Lrodpfx Aaszibc Ao Ror Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Dual-Column Bandsaw MBS 400 DG / 400 V Technical Specifications Cutting capacity, round / square 90°: 315 mm / 270 x 270 mm Cutting capacity, flat 90°: 400 x 250 mm Cutting capacity, round / square 45° (right): 280 mm / 280 x 280 mm Cutting capacity, flat 45° (right): 300 x 280 mm Cutting capacity, round / square 45° (left): 250 mm / 220 x 220 mm Cutting capacity, flat 45° (left): 280 x 200 mm Cutting capacity, round / square 60° (right): 180 mm / 140 x 140 mm Working height: 870 mm Saw band dimensions: 3460 x 34 x 1.1 mm Cutting speeds: 35/70 m/min Coolant pump: 100 W Motor output (S1 100%): 2.2 kW Motor input (S6 40%): 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2150 x 1400 x 1420 mm Weight: approx. 550 kg Scope of delivery Lredszibbxspfx Aa Rer • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end stop