Used Messer Ewm Stick 350 for sale (7,144)

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Gkodpocvkalofx Afuec Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Hydraulic pump comes: from an injection molding machine -Manufacturer: Battenfeld -double pump -Manufacturer: Flutec -Pump type: PT-350/2.3/N -Drive ABB motor type: MBT160L -Power: 15 kW 1455 rpm -with: clutch bell -with: Bosch hydraulic valves Gkjdpfodwqp Dex Afuoc -Dimensions: 1070/630/H500 mm -Weight: 232 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg Gedpfx Aodqkrwefuokc - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: good (used), Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm Gkodpfx Afjb A I Hdouec -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Condition: excellent (used), MRS 350 multi-saw - feed band width 35cm - max. cutting height 13cm Gsdpjp Audxsfx Afuskc - main engine 37kW - smooth adjustment of feed speed - max. saw size 400mm

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan Godpfxep A A Sae Afuokc -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Gkodpfxet H Ttue Afusc -Manufacturer: Willmann, hydraulic cylinder type 50/35x350 -Stroke: 350 mm -Piston rod: Ø 35 mm -Hole diameter: 120 x 10 mm -Dimensions: Ø 145 x 545 mm -Weight: 11.1 kg

Condition: excellent (used), Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear Gsdpfst Sz Htjx Afuekc -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Gksdstqfvyspfx Afusc

Condition: used, mileage: 185,000 km, power: 190 kW (258.33 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2018, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Audio system Audio 20 (with color display), Exterior mirrors with blind spot assistant, Luggage compartment cover / roller blind, Camera system 360 degrees, Navigation module Garmin MAP Pilot, Parking package, Seat cover / upholstery: Artico man-made leather, Heated front seats, Mirror package, Preparation for navigation system (Garmin MAP Pilot), Pre-installation for mobile phone/cell phone / convenience telephony / LTE-capable, Adaptive brake light, Airbag passenger side can be switched off, Airbag driver/passenger side, Active bonnet Adaptive brake light, Airbag passenger side can be switched off, Airbag driver/passenger side, Active hood, Drive type: all-wheel drive, Exterior mirrors electr. (Pelvisbag), Indicator light integrated in exterior mirror, Brake assistant, Glasses compartment integrated in headliner, Exclusive design and equipment line, Automatic switch-on for headlights, Driving assistance system: Agility Select / Dynamic Select (driving mode switch), Driving assistance system: Attention Assist (drowsiness detection sensor), Driving assistance system: Collision warning system with braking function (Collision Prevention Assist), Driving assistance system: Hill start assist, Electric windows front + rear, Remote release boot lid, Electric parking brake, Cup holder front, Urea tank (AdBlue), enlarged, Rear lights LED, Infotainment system: Mercedes me connect, Interior equipment: Piano lacquer-look trim, Isofix mounts for child seat on rear seat, Body: 5-door, Automatic air conditioning (Thermatic 2-zone), Knee airbag driver's side, Comfort suspension (Agility Control), Head airbag system (windowbag), Fuel tank: enlarged, Mercedes-Benz emergency call system, Engine 3.0 ltr. - 190 kW CDI KAT, Wheelbase 2873 mm, Tyre pressure monitoring system, Trip computer, Split/folding rear seat backrest, Low-emission according to Euro 6 emissions standard, Side airbag (sidebag) front, Electrically adjustable front left seat, Electrically adjustable front right seat, Start/stop system, Socket (12 V connection), Body-coloured bumpers, Warning system/status display for seat belts in rear, Heat-insulating glazing Gksdpetq Nviofx Afuoc

Condition: good (used), Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm Gjdpjlyvc Asfx Afuskc -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm Gedponcc Icjfx Afujkc crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: new, Year of construction: 2026, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. We are not always on site, so please call or write to us in advance. ━━━━━ Made in the EU. New machine, top quality! - CE marking - 7.5 kW main motor - Scoring saw - Swiveling electrically - 45° - Height adjustment electrically - Max. cutting height: 155mm - Sliding carriage can be locked in various positions - Wide and narrow dust extraction hood, quick to change - Max. saw blade diameter: 350mm - Extendable table extension on the crosscut fence - Crosscut fence extendable up to 330cm - Edge trimming shoe - Clamping device - Miter gauge - Weight: 1100kg - Sliding carriage 320cm x 40cm - Cutting width at the parallel fence 125cm - Dust extraction port 120mm - Speed indicator ━━━━━ CONTACT & CONSULTATION ━━━━━ Your contact person: Johannes Knipfer Tel.: Gewerbegebiet Ost 25a 92353 Postbauer-Heng ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes reserved by the manufacturers. Price changes, interim sales and printing errors reserved. Prices apply to collection. Gkedpemx R Efsfx Afuoc Shipping possible for an additional charge and by arrangement. Illustrations may show optional equipment that is not included in the price. A forklift is available for loading.

Condition: used, Thermal system, fan heater, heating elements Gedouqf Hzjpfx Afuskc -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Gkjdpfx Afjuddcgsujc Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Gksdpfeuiytljx Afujc Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Gedpsuiyvyefx Afuokc Lashing rings Errors excepted

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Operating hours: 77,890 h Gjdpjd Sqrrjfx Afujkc Tie bar distance: 42 x 42 cm

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/inside: Ø 350/273 mm -Height: 58 mm -Number: 2x pillows available Gkedpfxed Sqyge Afuoc -Price: per piece -Weight: 5.8 kg/piece

Condition: good (used), Stick electrodes 4.0 x 450 Gsdjd Emgzepfx Afujkc -Type: SH Green K 50 W -Price: per package -Number: 6 packages available -Weight per package: 6.2 kg

Condition: used, Stick electrodes 3.2 x 300 -Type: CITOCHROMAX N -Price: per package -Number: 13 packages available -Weight per package: 2.9 kg Gedpjd Emg Uofx Afuskc

Condition: used, Stick electrodes 5.0 x 450 Gksdpfxod Emhho Afujc -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

Condition: used, Stick electrodes 5.0 x 450 -Type: FOX MST -Price: per package Godpfx Asd Iyglefuokc -Number: 2 packages available -Weight per package: 6.2 kg

Condition: used, Stick electrodes 3.2 x 450 Gjdpfxsd I Al Ej Afuskc -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg

Condition: used, Technical details: faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm * Gsdpfxju Nk T Ss Afuekc