Used Mori Seiki Mv for sale (1,027)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,691 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes Travel path X-axis: 560 mm Travel path Y-axis: 560 mm Travel path Z-axis: 630 mm B-axis max. rotational speed: 44.4 rpm Kjdpexvzt Iofx Ai Redr Rapid Traverse Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to top of pallet: 80–640 mm Distance spindle nose to center of pallet: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Kdodpsxhf Efofx Ai Rer Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Extraction unit Tool setting arm Parts catcher Double foot switch

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts are available from a MORI SEIKI VL250, year of manufacture 2000: 1. Turret (not complete) Ball screw with nut, X and Z axis X and Z axis guide parts are from a new machine Kodpfx Aiecbinne Rsdr Motor, X-axis See photos.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm Kedpoy R U Ecsfx Ai Rsdr B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1063, turning length: 790 mm, turning diameter: 650 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 860 mm, center width: 900 mm, TECHNICAL DETAILS Turning diameter: max. 650 mm Turning length: max. 790 mm Swing over bed: 890 mm Swing over cross slide: 560 mm Distance between centers: 900 mm Travel paths X-axis: 350 (25 + 325) mm Z-axis: 860 mm Main spindle Speed range: 4 – 1,010 rpm Drive power: 37 / 30 kW Max. torque: 3,870 Nm Number of speed ranges: 2 Spindle bearing diameter: 240 mm Spindle bore: 168 mm Max. bar diameter: 144 mm Usable bar diameter: 120 mm Spindle nose: JIS A2-11 Chuck diameter: 610 mm Turret Number of tool stations: 12 Square tool shank height: 32 mm Max. drill shank diameter: 65 mm Tailstock Travel: 680 mm Quill diameter: 110 mm Quill stroke: 100 mm Tailstock taper: MT 4 Feeds Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 8 m/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MORIC T5F Electrical data Total power requirement: 69 kVA Frequency: 50 Hz Space requirement & weight Required space: approx. 6.0 x 3.0 x 2.6 m Kodpfx Aiexb Amgo Rsdr Machine weight: approx. 9.2 t EQUIPMENT Documentation Coolant system Tool presetting arm Three-jaw chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,858 h, functionality: fully functional, turning length: 705 mm, turning diameter: 275 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MSX-850III, TECHNICAL DETAILS Travel X-axis: 260 mm Travel Z-axis: 795 mm Turning length: 705 mm Max. turning diameter: 275 mm Swing over bed: 923.8 mm Swing over cross slide: 755 mm Bar work capacity diameter: 80 mm Upper turret Number of tool stations: 12 Main spindle Spindle speed: 4,000 rpm Spindle drive power: 18.5/18.5/15 kW (10 min/30 min/cont) Spindle nose: JIS A2-8 Tailstock Tailstock travel: 734 mm Kdedpfx Asyz Aq Isi Ror Taper: MT5 MACHINE DETAILS CNC control: MSX-850III Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,922 x 2,120 mm Weight: 5,800 kg Operating Hours Main spindle hours: 3,858 h Power-on hours: 21,543 EQUIPMENT Chip conveyor Tool measuring arm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Kedpfx Aijd Hkucj Redr Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Ksdpfx Aiezcla Ho Rsdr Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Turning diameter: 460 mm Turning length: 795 mm Control system: MORI SEIKI M730 BM Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m Kdodpfx Ajy Szwhji Rer

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 400 mm turning length - mm control DMG Mori SLIMline z-axis ca. 750–755 mm x-axis 276 mm y-axis +/-60 mm greates pass round over bed 700 mm Additional information The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19"/Operate 4.7 on Siemens) Screen language: German/English Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (100/40% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindle speed 5000 rpm 12-station servo tool turret: VDI 40 mount with 12 driven tool stations Equipment: Y-axis +/- 60 mm Direct position measuring system (X and Y axes) Bar package & interface IEMCA KID80/16 short bar loader, bar capacity 80 mm Differential pressure clamping for main spindle Chuck flushing for main spindle Reduction tube for main spindle Hainbuch SPANNTOP nova Combi G80 Axzug collet chuck Differential pressure clamping for counter-spindle Chuck flushing for counter-spindle Automatic workpiece ejector Counter-spindle with internal coolant supply for workholding flushing SMW BB-D210 hydraulic 3-jaw chuck for counter-spindle SMW BB-D250 hydraulic 3-jaw chuck High-pressure pump 12 bar Coolant spray gun bar Dual cartridge filter for coolant, filtration fineness 60 µm Manual tool measuring device in the workspace, Marposs make Ksdpfx Aijzu Nxps Rjdr Tool monitoring system, Easy Tool Monitor 1.0 technology cycle Alternating Speed ??technology cycle 3D data model in STEP format DMG MORI Messenger V2 DMG MORI Netservice – client Finished part discharge conveyor Chip conveyor with right-hand discharge External electronic handwheel Tool holder package

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 71, turning length: 360 mm, turning diameter: 440 mm, spindle speed (max.): 5,000 rpm, bar passage: 45 mm, controller model: Fanuc 18iTA, TECHNICAL DETAILS Turning diameter: 440 mm Turning length: 360 mm Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Kdsdpfx Aisy E Hpio Ror Spindle nose: ASA A2-5 C-axis: 0.001 on both spindles MACHINE DETAILS Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW EQUIPMENT Chip conveyor Parts catcher Bar loader interface Bar loader: LNS Mini-Sprint S2 42/3M

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Kodpfx Aijx I Amis Rjdr Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided Kdodsziz S Dspfx Ai Ror The machine was subsequently fully inspected and approved by DMG MORI.

Condition: excellent (used), Year of construction: 2014, 2014 DMG MORI NHX 5000 CNC Horizontal Machining Centre with Siemens 840D SL Control High-Performance DMG MORI NHX 5000 CNC Horizontal Machining Centre, Manufactured In 2014 & Equipped With Siemens 840D sl CNC Control. The machine Has Recorded 23,262 Power-On Hours, 15,894 Spindle Hours And Is Available For Inspection Under Power. Designed For Precision Machining, The Machine Features A 12,000rpm (30kW Motor) SK40 Spindle, 2-Pallet Changer (500 × 500mm (5 'T' Slots), 40-Position Automatic Tool Changer, 1° Indexed B-Axis Table. Axis Travel 'X'=730mm, 'Y'=730mm, 'Z'=880mm. Rapid Traverse 'X,Y & Z'=60m/min. Maximum Spindle Torque 102 Nm. Twin 500 × 500 mm Pallet Changer. Maximum Pallet Load 500 kg. Maximum Workpiece Ø630 x 900mm High. Total Connected Power Load 57 kVA. S/No. 1229000053 (2014) Ksdpfxszvcl Sj Ai Rodr With 40 bar High Pressure Through Coolant System, Chip Conveyor, Renishaw PP60 Touch Spindle Probe & Machine Documentation. Machine Weight Approx. 11.5 Tonnes.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Kdsdpfx Ajyxm Iroi Rsr Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: good (used), Year of construction: 2007, CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Kdedpozinn Eefx Ai Ror Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, functionality: fully functional, machine/vehicle number: NRX20151106, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,000 mm, spindle nose: JIS A2-5, overall weight: 5,600 kg, CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 300h Spindle-hours. Technical details / additionals / accessories number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Kdedpezuauzofx Ai Rer Workpiece-storage Tool drive mechanism

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year: 2005 Kedpfx Aiozizd Hj Rodr Working hours: !!! 9.971 !!! h SPECIFICATIONS Travel X-Axis: 1.400 mm Y-Axis: 1.200 mm Z-Axis: 1.200 mm B-Axes: 0,001° Rapid motion: (X/Y/Z): 50 m/min. Spindle speeds: 10.000 rpm Spindle power: 30 / 25 kW Tool: BT 50 Toolchanger Tool capacity: 140 Palett system Amount of paletts: 2 Palett size: 800 x 800 mm Machine weight: 32.000 kg Req. space (LxBxH): 9,200 x 4,900 x 3,920 m Equipment Internal cooling: bar Chip conveyor High pressure pumps

Condition: excellent (used), Year of construction: 2016, operating hours: 9,000 h, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turn-mill center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Operating hours: 24,800 h Program running hours: 9,000 h Kdodpfx Aezfguvsi Rsr Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter (main spindle): 66 mm Bar diameter (counter spindle): 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: - High-pressure system 40 bar - Tool measurement system - Chip conveyor - Bar loader LNS - Workpiece collection tray

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Ksdpfxjyc Unme Ai Rjdr Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We have acquired this Japanese DMG MORI ecoMill 600V directly from production and it is in very good condition. The CMX 600V (ecoMill 600V) features a C-frame design (classic configuration) and a movable table (X-axis), which makes it suitable for general/all-round milling tasks. Additional options & accessories: - Siemens 840D SlimLine including 3D simulation. - PROGRESSLine (indicates the remaining production time and quantity for a complete machining process). - Chip conveyor - Rinsing gun Ksdey Dg Euopfx Ai Redr - Preparation for internal cooling - Original documentation

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Tool holder SK50 Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic Kdodpfozucm Hox Ai Rer 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Ksdpfx Aoy Eydysi Redr Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Kjdpfxszr Ruge Ai Rjdr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Kjdpfx Aisyvhuhe Redr Additional Information: Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.