Used Mortiser For Micro-Joint (Micro-Dowel) Connections for sale (18,227)

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption. Kodpfx Ansb Tmpqodona

Condition: used, functionality: fully functional, machine/vehicle number: T102L00334, This listing is for a second-hand ‘Plockmatic PBM350-m’ finishing machine Item for sale: 1 x Plockmatic PBM350-m incl. front trimmer incl. SquareFold Knedpfxezmqa So Andja Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, mileage: 300,000 km, first registration: 01/2002, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2002, Damage: Vehicle damaged (not drivable). Knsdpfx Aezmdwkendoa

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Kodpfx Ajy Tkg Uendjna Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box The measuring device has already been disassembled and packed.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing . Kedst Ndznepfx Andsna

Condition: ready for operation (used), Diagonal min.: 57 x 70 mm Diagonal max.: 95 x 122 mm Height range: 76 mm – 280 mm Production capacity: up to 300 pcs/min. Kedpjyyq N Ajfx Andena

Condition: ready for operation (used), Straight filling line Kodpfx Ajy A Tkzsndena Suitable for cans and jars Shower filler for brine, oil etc.

Condition: ready for operation (used), Autoclave for cans Knedpoyyvi Iefx Andea

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Kodpfx Aew I Uy Tendjna Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm Knjdpfx Aowuuxkjndsa 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line - German production - DTR, CE - year of manufacture 2010 Knedsin Uulspfx Andea - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Knedpfsxwaz Hox Andja

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Kodpfx Ansxnlfledjna

Condition: good (used), Year of construction: 2019, In stock is a well-preserved CNC doweling machine STARTECH CN Plus. The price is excluding VAT. Knjdpfx Anjwtnlujdea

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. Knsdsvdb A Nspfx Andea

Condition: ready for operation (used), Year of construction: 2010, Fully automatic dovetail cutter system: Double-pack type Machine has been dismantled Machine will be inspected with functional guarantee Specifications: Wood input length: min. 200 mm Ksdpfx Ajznh Szendona max. 4000 mm Wood cross-section: min. 20 x 40 mm max. 80 x 220 mm Wood output length: 18,000 mm Max. wood cross-section with 10 mm dovetail size: hardwood 120 cm² softwood 150 cm² Dovetail design: vertical and horizontal Adhesive type: PUR Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System is completely wired up to the control cabinet. Dovetail length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided application With continuous packaging

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Knsdpjvuq Hlofx Andja Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: new, Year of construction: 2026, CORMAK LBM290 Horizontal Wood Boring Machine – Precision Drilling and Ergonomic Operation The CORMAK LBM290 is an advanced horizontal wood boring machine designed for efficient drilling in furniture manufacturing and woodworking applications. It delivers high repeatability, precision, and operational safety. Thanks to its robust construction and extensive adjustment capabilities, it is an ideal solution for woodworking workshops and production facilities. Main advantages of the machine Series drilling capability – hole spacing can be adjusted to 16, 20, 22, or 32 mm using the optional dowel drilling attachment. User-friendly operation – the ergonomic worktable allows convenient one-hand operation. Precise height adjustment – quick and accurate table height positioning with a numerical indicator. Secure workpiece clamping – an eccentric clamp ensures reliable material fixation during drilling. Versatile drilling angles – dual-angle stop adjustment up to 60° in both directions. Dust extraction connection – Ø100 mm extraction port efficiently removes chips and dust from the work area. Construction and technology The CORMAK LBM290 features a compact yet durable design. It is equipped with a 3.1 kW (S6) motor, a 0–16 mm drill chuck, and a worktable measuring 500 × 207 mm with adjustable height from 760 to 900 mm. The spindle operates at 2,850 rpm, providing fast and accurate drilling in a wide range of wooden materials. An integrated tool storage compartment and a robust guide mechanism improve workflow organization and overall operating convenience. Precision and work efficiency With left- and right-hand spindle rotation as well as precise depth and angle adjustment, the CORMAK LBM290 offers exceptional flexibility. A maximum drilling depth of 150 mm and a drilling width of 309 mm make the machine suitable for a wide variety of woodworking applications. Its powerful drive system and optional series drilling capability significantly improve productivity, even during continuous operation. Applications The CORMAK LBM290 horizontal wood boring machine is designed for: woodworking and upholstery workshops, serial furniture production, prototype and custom woodworking projects, Kodjvuq Dkspfx Andsna assembly work requiring precise wooden joint drilling. Standard equipment 0–16 mm drill chuck Eccentric workpiece clamp Angle guide Travel stop Ø100 mm dust extraction hood Integrated tool storage compartment Optional equipment Series dowel drilling attachment Additional spindle module Brush-type dust collector Technical specifications Parameter Value Table dimensions 500 × 207 mm Table height 760–900 mm Maximum drilling width 309 mm Maximum drilling depth 150 mm Spindle speed 2,850 rpm Drill chuck capacity 0–16 mm Motor power (continuous duty S6) 3.1 kW Power supply 400 V Dimensions 770 × 920 × 1245 mm Weight 117 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Connecting coupling: Torsionally flexible shaft coupling Knedpfozlga Sjx Andea -Shaft: Ø 28 mm -Dimensions: Ø 100 x 100 mm -Weight: 3.0 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. Kedpfjqy Nv Rox Andena The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, total width: 1,350 mm, total length: 1,200 mm, total height: 1,300 mm, spindle speed (max.): 3,900 rpm, overall weight: 530 kg, input voltage: 400 V, milling spindle length: 200 mm, rotational speed (min.): 3,900 rpm, rotational speed (max.): 3,900 rpm, working width: 200 mm, spindle diameter: 50 mm, We are offering this used Omec F10/200 fork cutter, manufactured in 2009. Kodpfozmug Nex Andona Manufacturer: Omec Model: F10/200 Year of manufacture: 2009 Condition: used Machine type: Fork cutter, finger fork, drawer fork Fully functional OMEC F10/200 milling machine for the production of finger forks for drawer blade manufacturing. Manufactured in 2009, motor power 11.5 kW, spindle diameter 50 mm and weight approximately 530 kg. Without fork cutter set. The machine is in good condition and can be inspected and demonstrated by appointment. Loading and transport can be arranged.

Condition: like new (used), Handling equipment for a finger jointing line. Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, Kedpod Duz Ejfx Andena trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Knodpfx Anoyuty Sedoa Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available - Kedpfsyxx A Iex Andsna

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames Knedpexdttpofx Andja 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice