Used Mtf-Technik Gl-Hm 010 for sale (11,125)

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Lhsdpfx Aozc Efcemzon Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Lsdpszc Hvpjfx Amzshn Transportation costs are the responsibility of the buyer.

Condition: used, Year of construction: 2019, operating hours: 450 h, 2019 | PB Lifttechnik PB S171-12ES (17.3m) | Used Scissor Lift | 450 hours 📍Location: Italy 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 31 inspection points 31 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40851 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Lhsdpfx Ajzf Rlremzjn We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, input frequency: 50 Hz, input voltage: 400 V, empty load weight: 50 kg, Tool tempering heating: 9 kW. Temperature: 150°C. Lhodpfx Amozab A Ejzen

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers Ledpfezp Nv Dox Amzjhn 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Lhodpfxozqab Te Amzon Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. Lhjdjzt Ipkjpfx Amzen The sale is made against advance payment, ex works, without any warranty.

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Lhsdpfxjz Afhpe Amzsn Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Lhjdsz A Eidjpfx Amzsn Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Price on request. Internal reference: 781461. Technical data according to available manufacturer documentation.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller model: FANUC 160is-MB, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item within the timeframe of calendar week 29 (July 13 - July 19, 2026)! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 510 mm Travel in Z-axis: 560 mm Table length: 400 mm Table width: 400 mm Spindle and Feed Distance between spindle nose and table: 150 - 710 mm Spindle speed: stepless Spindle speed from: 100 rpm Spindle speed to: 12,000 rpm Maximum torque: 150 Nm Working feed rate: 1 - 40 m/min Rapid traverse rate: 40 m/min Workpiece data Max. workpiece length: 620 mm Max. workpiece width: 620 mm Max. workpiece height: 700 mm Max. workpiece weight on the table: 400 kg Pallet changer Pallet station: 2 pallets Number of pallets: 8 Tool magazine Number of tool positions: 60 Lsdpfxsy Uy H Hj Amzshn Tool diameter: 82 mm Diameter with available adjacent positions: 140 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time: 1 s Average chip-to-chip time: 3.4 s Tool holder: ISO 40 MACHINE DETAILS Control: FANUC 160is-MB Coolant system: 400 l Coolant through the spindle (IKZ): 20 bar Dimensions (L x W x H): 2,100 x 3,955 x 2,844 mm EQUIPMENT Chip conveyor NC rotary table Coolant/mist extraction Status indicator

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. Lhodpfszxtz Nsx Amzen High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Ledpezvylpefx Amzehn Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Condition: used, Year of construction: 2014, operating hours: 628 h, 2014 | PB Lifttechnik PB S151-16E | Used Scissor Lift | 628 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Lhodjzw N T Eopfx Amzon Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 35 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: machine in good working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41247 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Ljdezw Uilepfx Amzshn Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: Lhjdpfx Ajw E H E Rsmzsn - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, functionality: fully functional, KEYENCE CORP GL-R103F-T + GL-R103F-T . Items sold in pair. Price is for pair. Model #: GL-R103F-T + GL-R103F-T More Information: Safety Light Curtain Supply: 24VDC Detection Height: 1020mm Detection Distance: 0.2m - 10m Detection Capability: 14mm Diameter Output: PNP/NPN 500mA Ledpfxeyu S Smj Amzehn Connection: 12-Pin

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, * Setra 212 HM with 32 seats - 6-speed manual transmission - Toilet - Kitchen - Round seating area * Diesel - 12,675 cm³ - 256 kW - 350 hp - Euro 0 - No emissions sticker required - 8 cylinders - Air suspension Lodpfsyy T N Ssx Amzshn * 32 seats + 1 driver - Auxiliary heater - Radio - Simple door at the front and rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle - German vehicle registration document - Sold on behalf of a customer * Errors/printing errors and prior sale reserved - immediately available * Please schedule an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please inquire about the exact location - ATTENTION

Condition: ready for operation (used), Year of construction: 2003, operating hours: 77,890 h, functionality: fully functional, clamping force: 1,274 kN, screw diameter: 40 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 130 t Tie bar distance: 420 mm x 420 mm Screw diameter: 40 mm Lhodey Ewpmopfx Amzjn MACHINE DETAILS Operating hours: 77,890 h Note: When purchasing multiple items from the same location (see offers below), the lower applicable costs for dismantling and loading will be granted.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 14200 € 272.64 € Schwenkrahmen 4160x34x1,1 mm 20-100 m/min 320 mm 320 mm 610x320 mm rund 260 mm, quadrat 225 rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 740 mm 0.37 kW 2.2 kW 0.12 kW 2100 mm 1200 mm 1350 mm 1150 kg rund 320 mm, quadrat 320 blade brush Lsdoynm Ntopfx Amzjhn control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English Lsdpfewkpvvox Amzehn - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2025, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) Ljdpfx Aswkpwaemzohn - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs Lhodowkpxkopfx Amzsn - marking of various materials

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. Lhsdpfxowkpyhe Amzsn 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: good (used), Year of construction: 2019, Volume measuring device incl. weight detection for master data acquisition, Bosche – used: Price ex works: now only €4,500.00 instead of €8,500.00 (net)! Manufacturer: Bosche Wägetechnik Type: zippcube Should be size M Serial No.: Z201900158 Year of manufacture: should be 2019 Max. 50 kg 16-20 V/DC Weight of scale: 110 kg With HMI 12 display Combined volume and weight detection in a single process Ideal for master data acquisition with space requirement measurement New price: approx. €20,000.00 (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Lhedpfx Aexqffdjmzen Available: immediately Location: Biberach

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client Lodpfxsxrgkwe Amzehn • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)