Used Needle Bearing for sale (3,177)

Condition: new, RHP Bearings – Radial ball bearing MJ4.1/2JC3, unused, in original packaging, 100% functional. Godpfx Abei Ec Dbjfeka

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS NEW, NEVER USED Gkodpfxeqpf T Io Abfja Main Demensions: 425 x 700 x 150 mm Weight 216 kg 2 units available WAREHOUSE LIQUIDATION

Condition: new, 2TR19H C3 FP KOYO TAPERED ROLLER BEARINGS NEW Dementions: 482.60 x 615.95 x 184,15 mm Weight 150 kg WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: NP342204-90WA2 TIMKEN x14 units 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 Gjdpfxoqpgc Ne Abfska F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6

Condition: used, Injector Ruhle 30 needles Stainless steel Electric power: 2.2kW Dimensionsć: 65x135x190cm Gksdoyab Dpspfx Abfja

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK Gksdpfx Aoqpfvbjbfoa NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg 3 units available WAREHOUSE LIQUIDATION

Condition: good (used), Make: OMERA Gkjdpfxskvnume Abfja Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Gjdpfxskvnuus Abfska Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 6,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 405 mm, overall weight: 6,000 kg, total height: 2,065 mm, product length (max.): 8,525 mm, This 4-axis SCHÜCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÜCO Profilbearbeitungscenter. Contact us for more information about this machine. • Voltage: 380 V, 50 Hz • Power Consumption: 21 kW • Operating Pressure: 0.8 MPa • Speed: 24000 rpm • Tool Holder: HSK-40E • Tool Dimensions Cutter/Drill: mm • Diameter of Side Milling Cutter: 200 mm Gksdpfxex U Dfas Abfea • Tool Magazine: 8 + 1 • Quick-change System: Available • A-axis: 180° Continuous • Traversing Speed X / Y / Z: 80 / 60 / 20 m/min A-axis • Speed: 10800 rpm • Number of Clamping Blocks: 8 • Positioning of Clamping Blocks: Automatic • Profile Clamping: Horizontal • Air Consumption: Max. 200 NL/min • Operating Pressure: 6 - 8 bar • Cooling Unit with Temperature Control: Available Dimensions Machine Depth 2235 mm

Condition: ready for operation (used), Year of construction: 2004, overall weight: 5,000 kg, spindle motor power: 21,000 W, number of axes: 4, This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details. • Voltage: 380 V Gkodpfx Ajypcgqebfea • Frequency: 50 Hz • Current consumption: 42 A • Maximum operating pressure: 0.8 MPa • Nominal pressure: 0.6 MPa • Maximum air consumption: 200 NL/min Additional equipment • Wireless handheld scanner

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Gedpfszcfhdex Abfska

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Gsdsiinknspfx Abfeka Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Gkodpjd Iclrofx Abfsa Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 50290 € 950.48 € 610 mm 600 mm 610 x 305 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 1.100 mm/min 1 - 12 mm 370 mm 1.5 kW 0.004 kW 0.19 kW 7,4 kW 2670 mm 1810 mm 2050 mm 2100 kg Gksdpfx Abowirh Sjfja 355 x 50 x 127 mm 1.450 U/min 3,7 kW 4 mm 0,02 mm 0,2 mm 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 119920 € 2266.49 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 0 - 20 m/min 0 - 3000 mm/min 0,001 mm 350 mm 440 mm 0 - 3000 mm/min 0.001 mm Godpfxowirb Sj Abfeka 500 - 1800 1/min 11 kW 3160 mm 2450 mm 2080 mm 3400 x 2200 x 2530 mm 4000 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 3.9 kW 0,005 mm 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs All 3 axix with precision ball screws (class C2) and AC servo motors Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 109520 € 2069.93 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 5 - 25 m/min 0 - 3000 mm/min 0,001 mm 350 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 2.2 kW 4020 mm 2450 mm Gjdpfx Aswiq H Tebfoka 2080 mm 3400 x 2220 x 2530 mm 3700 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 0,005 mm 0,005 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs Transverse and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulically Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Gkodpfx Abezpbazjfsa Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, Year of construction: 2010, Second-hand machine Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Gjdezk Nzvspfx Abfeka Availability: at short notice Location: Rhineland-Palatinate

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Gkodpjcvpudofx Abfea -Roll diameter: 218 mm -Transport roller width: 790 mm -Holder with needle bearing plate: 140 x 140 x 19 mm -Flange mounting inside: Ø 110 mm, bolt circle Ø 140 mm -Number: 4x rolls available -Price: per piece -Weight: 40 kg/piece

Condition: ready for operation (used), Schunk GFS 25-180 universal swivel finger 355510 + INA HK2516-2RS needle bearing, used, good condition, 100% functional, delivery as per photos. Godpfox Eucqjx Abfoka

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Godsxah Sfjpfx Abfjka

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, Gkjdpfx Abezb Rbtofsa curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: good (used), We are offering 4 transport rollers for sale here. Gjdohunwpepfx Abfska The scope of delivery includes: 04x swivel casters, used Manufacturer: Kama Roller material color: Red Frame material color: sendzimir galvanized Technical data: Overall height: approx. 155 mm Roller diameter: approx. 125 mm Roller width: approx. 34 mm Bearing: needle bearing Roller material: rubber Plate dimensions: approx. 105 x 80 mm (W x D) Hole diameter: approx. 9 x 17 mm (oval) Number of holes: 4 pcs Screw hole spacing: approx. 80 x 55 mm (center to center) Weight / piece: approx. 0.970 kg

Condition: good (used), Current stock level: approx. 965 units. The scope of delivery includes: 1 x swivel castor, used Manufacturer: Kama Castor material color: Red Frame material color: sendzimir galvanized Godpfx Abohmuyzsfeka Technical data: Overall height: approx. 155 mm Castor diameter: approx. 125 mm Castor width: approx. 34 mm Bearing: Needle bearing Castor material: Rubber Plate dimensions: approx. 105 x 80 mm (W x D) Hole diameter: approx. 9 x 17 mm (oval) Number of holes: 4 pcs Screw hole distance: approx. 80 x 55 mm (center to center) Weight per unit: approx. 0.970 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Gedpfezbac Tsx Abfjka Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA Godpfottxg Isx Abfjka weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *