Used Nihot Sds 1000 for sale (8,828)

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, total width: 1,050 mm, total length: 1,175 mm, total height: 1,600 mm, input frequency: 50 Hz, input current: 10 A, empty load weight: 300 kg, electrical fuse: 16 A, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, type of input current: three-phase, cone rounder Model: KCM 1000 Output max. 1200 pieces/hour Stainless steel version with flour Teflon-coated cones and troughs Effective path approx. 3.5 m Knitting channels adjustable for dough weight from 300 to 1200 g machine mobile Connection 400V, 0.75 kW, 16A-CEE plug Bdodpfx Ash H Sq Tjd Ajb Dimensions approx: 1050 x 1150 x 1600 mm, WxDxH Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber Bdedpfey Dclwox Ad Asb 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Bdjdpfxsy Dclqo Ad Asb Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone. Bedpfey Dck Tex Ad Aedb

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Bdsdpfxoy Dciij Ad Aeb Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: good (used), Manufacturer: Haver & Boecker Type: Niagara MD 1000 x 2500 G Deck size: 1.000 x 2.500 mm Number of decks: 2 Included: – Frame – Springs – 4KW Electrical Motor Bdedpfx Asy A S T Isd Aob Vibrating screen can be sandblasted and painted.

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of manufacture: 1995 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Euromap Robot interface Bodsy Dqtcjpfx Ad Aedb Hydraulic core pull X 1 Dimensions: Weight: 3,700 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pump/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dose volume: 201 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy-efficient and extremely quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Control for hot runner systems x 12 Hardened injection unit - bimetallic Main drive motor - servo motor powered by inverter – energy saving Injection unit driven by servo motor controlled by inverter Machine equipped with a cylinder / accumulator with compressed nitrogen (additional charge for fast cycling) Central lubrication Integrated sorting flap Arburg Multilift Select robot, 6kg transverse Year: 09.2010 4-axis robot: 3 axes electrically driven by servo motors; C axis - pneumatic Travel range (axes): X-400, Y-600, Z-1800 Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor belt available at extra cost Bedpfx Adey Dquas Asdb Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 230 mm, total length: 5,000 mm, overall weight: 6,600 kg, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, rotational speed (min.): 8,000 rpm, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 8, extraction connection diameter: 140 mm, Equipment: motor brake, WEINIG profiler, model Powermat 1000, equipped with: lower horizontal shaft, right spindle, left spindle for all widths, right spindle, upper horizontal shaft, lower horizontal shaft, upper horizontal shaft, lower horizontal shaft. CNC on left spindle, upper horizontal shafts, finishing lower horizontal shafts. 8,000 rpm motors, equipped with PowerLock, 80 mm spindle stroke, metric counter of produced linear meters, grooved table, feed speed: 36 m/min. Bdjdpfx Ajy Aywued Ajb

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 2,500 bar, overall weight: 1,800 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Bjdpfxjyt R S Ao Ad Aodb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2001, gebraucht 2001 Bodpjwirkgjfx Ad Ajdb 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 14 kg, maximum load weight: 35 kg, overall weight: 50 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, tire condition: 100 %, Further Information Chassis Low-bed Semi-Trailer Steel welded construction, kingpin plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-side operation, with straight lower part, without shift equalizer Foldable rear support 2x wheel chocks with holders Side underrun protection made of aluminum Quarter shell mudguards in front of and behind the axle assembly With mud flaps behind each axle 1x storage box, w = 2,350 mm x l = 730 mm x h = 640 mm, bolted transversely to the front of the gooseneck, with 2 storage trays Extendable widenings to 3,000 mm (not at rear bevel end) (Track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber boards on the gooseneck, transverse at the front 70 mm timber boards for extension to 3,000 mm Excavator arm recess starting above the rear axles and extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low-bed 3 pairs of 10 t lashing eyes at the front gooseneck, 8 pairs of 10 t lashing eyes in the low bed, 3 pairs of lashing rails in the driving lane area of the low bed, 3 pairs of 10 t lashing eyes at the axle/rear area Bdsdpfoi Ri Hgsx Ad Aeb Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption With steering axle Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system, color-coded line routing for easier service. Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at front, without connection cable Attention: The trailer must only be towed by towing vehicles that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connection line With raise & lower valve, hold function in lowered position + auto-reset function Axle load detection via EBS CAN bus signal, displayable on the cab display (truck must be suitably prepared, no truck installation incl., not a calibrated scale) Vehicle Driving Stability System Trailer Infocenter for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights in LED 2 white/red lane guidance lights at the rear 2x 7-pin non-interchangeable sockets at the front, without connection cable 1x additional LED work light at the rear, switched via reverse light 1x LED rotating beacon with holder, switched via parking light (removable beacon) 2 pairs of warning panels, double, LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel / checker plate covering In the running lane area with 70 mm softwood flooring, in the wheel arch area steel / checker plate covering, low bed left and right in running lane area can be hydraulically raised, via truck auxiliary drive Rear bevel with 70 mm softwood decking Low-bed length approx. 6,300 mm Drop sides 25 mm aluminum hollow profile, 400 mm high, front and sides on gooseneck, plug-in Ramps Steel ramps, 2,800 mm long, 750 mm wide, side mo

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Bedpfxjh Eii Ts Ad Asdb Technical data and description: see pictures

Year of construction: 2011, condition: excellent (used), machine/vehicle number: 3130055185, with Freeflow Printserver and Clear Toner Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum Print Image Assurance: 12.48" x 19.05" (317 mm x 484 mm) Machine can staple, punch, fold & front cut Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Bodjh Nvm Dopfx Ad Ajdb Various spare materials: Contains 1 bottle Blaue, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Tonner Bottle 2x Tonner Waste Container 10x Cartridge M 006R01472 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assembly 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Bdjdpfx Aoylpp Djd Aob Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Bdjdpfx Aoft U Saed Aeb Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Bjdpfod Sblmex Ad Aodb Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Bdsdpjyrfgrsfx Ad Aob Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Bodoyvpt Eepfx Ad Asdb

Condition: used, mileage: 20,301 km, power: 114 kW (155.00 HP), first registration: 01/1997, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, Equipment: crane, MAN 8-163 with roofing crane Böcker AK 27/1000 4x2 Self-propelled work machine Mobile Crane DA53 Bedpfx Adey A Afbj Aodb Suspension: leaf-leaf Wheelbase: 3.70 m Böcker crane Type: AK 27/1000 5x extensions 4x hydraulic outriggers 1x remote control + emergency control 1x work basket and accessories We are also happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Subject to error and prior sale.

Condition: excellent (used), Year of construction: 2002, Planetary mixer Skako 1500/1000 1m3 ready concrete with skip year 2002 very good condition Bdjdpfxsy D Td Do Ad Aob

Year of construction: 2019, operating hours: 3,575 h, condition: excellent (used), Weiss Climate Test Chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours: 3,575 h. For sale is a high-quality climate test chamber of the type ClimeEvent C/1000/70/5. This unit is used in industry, development, and quality assurance to test components and products under extreme temperature and climate conditions. The chamber enables realistic simulation of environmental conditions – from severe cold to high temperatures as well as humidity exposure. Ideal for electronics, automotive, materials testing, and research. The unit operates reliably and reproducibly and is designed for long-term tests as well as standard-compliant testing. With this climate chamber, temperature and humidity conditions can be precisely set and controlled. This enables you to test aging, load, and function of components under real-world environmental conditions. Typical applications include temperature cycling tests, climatic tests with humidity, and endurance tests. Thanks to rapid temperature changes (up to approx. 5 K/min), accelerated testing is also possible. Technical specifications: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Bsdpsy Avfzofx Ad Aedb Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% r.h. Interior (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A / R23 Weight: approx. 1,300 kg Important information for you as a buyer for your security: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, mileage: 189,560 km, power: 110 kW (149.56 HP), first registration: 06/2001, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro3, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,370 mm, Equipment: soot filter, tail-lift, Body: * Bodywork/Body: 6.10m dry freight box * Kögel body construction * Internal dimensions: 6,100mm x 2,450mm x 2,370mm * MBB tail lift, 1,000kg capacity * Right-hand side door * 3 rows of anchor rails * Roof air deflector Equipment: * Driver’s air-sprung seat * Storage box * Roof hatch Bdodpfx Adoy A Apge Asb * Analog tachograph * Diesel particulate filter Other Information: * First registered in Germany * 2 previous owners * Suspension: leaf/leaf * Engine: 4.2 Litre – 110 kW diesel * Payload: 2,210 kg according to registration certificate * Permissible gross weight: 7.49 t * Well-maintained condition with original mileage Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual quote! Trade-ins of your commercial vehicle or construction machinery are welcome. If you require a new TÜV inspection, we are pleased to offer a quote from our partner workshops. Please note that our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners at an additional charge. The information provided in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment should be checked separately where applicable. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Swing over bed mm 500 Swing over cross slide mm 270 Distance between centres mm 1000 Spindle mm 50,8 Main motor output kW Machine dimensions: Bdodpfxsy Eyz Ss Ad Ajb length mm 2575 width mm 1100 height mm Machine weight kg 1615 - 1715 - 1815

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Bdjdpjy E Hpcofx Ad Aeb Air delivery (0–6 bar): 990 L/min Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Weight: 160 kg