Used Okuma Okuma Lb400-M for sale (70,505)

Condition: used, Vertical, insulated stainless steel tank. Most recently used as a CIP tank. Additional title: Vertical stainless steel tank with insulation; built around 2000 Capacity: 7000 l Width: 2,2 m Height: 3,1 m Kjdpfeztzdhsx Ai Redr Weight: 800 kg Material: Stainless steel Position: Vertical Base construction: 3 x feet Features: Side manway; insulation

Condition: used, Year of construction: 1990, System for cleaning the inside of and filling kegs. Additional title: Keg cleaning and filling system Kedpjzty Tbefx Ai Rodr Capacity: 30 Keg/h

Condition: used, Year of construction: 1986, Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet Additional title: cleaning and filling Capacity: 50 keg/h Working pressure: 7 bar Voltage: 220/380 V Frequency: 50 Hz Length: 2,0 m Width: 2,0 m Height: 2,0 m Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type Kodoztywyepfx Ai Rodr Operation / Control: semiautomatic Material: stainless steel construction as frame, piping and valves as well as main mechanical parts largely made of stainless steel Features: 3 internal cleaning stations, filling station caustic tank and acid tank with pumps

Condition: ready for operation (used), Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement. Kdjdpszta E Dsfx Ai Ror

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 Kedpfx Aozrihxsi Rjdr - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) Kjdpfx Aijy Rnbde Rjdr 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racking (4 x M45112711-2) each 8.5 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. Kdedpfsztm H Uox Ai Rjr - 16 upright frames (RM4511 - RAL5019) - 32 base plates, shims, fastening materials - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after payment receipt - delivery to construction site/assembly location is included - unloading from the truck is carried out by the buyer using their own lifting equipment. - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are made based on individual agreement.

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable After a complete inspection, fully functional Kdodpfjx Hi R Sjx Ai Rjr PRICE REDUCTION FROM 1550 TO 1150 EUR!!!

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, Ksdpfxjzrr Nfe Ai Redr each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation Kodpezh H I Iefx Ai Redr - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Kdjdpfx Ajzma E Dei Rsr Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes Kdedpfx Asy Aaxroi Rsr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: Kodpfx Aiozrbxcs Rsdr - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment Ksdpfxozqyn Te Ai Rjdr - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height Kedodzc Rxopfx Ai Rodr 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Kdedjb Tmrvjpfx Ai Rer Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. Kedpfx Aisdzc Rfe Rodr A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: used, functionality: fully functional, machine/vehicle number: T102L00334, This listing is for a second-hand ‘Plockmatic PBM350-m’ finishing machine Item for sale: 1 x Plockmatic PBM350-m incl. front trimmer Kdodpfxjzmqa Se Ai Rer incl. SquareFold Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Ksdoztaahepfx Ai Redr Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. Kdedpezpd Alofx Ai Rer The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The oven is in very good condition. Conveyor belt length: 6 m. Stepless regulation of temperature and belt speed. Kdsdpfexfkyiox Ai Rer

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Kdodpfx Aiozpfa Sj Ror Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Kjdpfxezpbufj Ai Redr Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F Kjdpfxezn N T Te Ai Rjdr

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. Kdedpfxozn N Auj Ai Rer The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F