Used Oliver Fritz Gmbh & Co. Kg Sh10.05.05.3Ffb for sale (101,080)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Packaging Line for Pharmaceutical and Medical Device Products For sale is a high-quality, fully automatic packaging line from the German manufacturer PKM Packaging GmbH / KOCH Pac-Systeme GmbH, manufactured in 2012. The system was developed for demanding secondary packaging processes and is ideally suited for pharmaceutical products, medical devices, diagnostics, healthcare, cosmetics, and similar industries with high quality requirements. The line consists of two interconnected machine modules and handles the complete packaging process – from the automatic erection of folding cartons to product placement and grouping, as well as sealing, labeling, check weighing, and the rejection of defective packaging. The modular design allows for flexible adaptation to different product and packaging formats. The first machine module features an automatic carton erector with a carton magazine, servo-controlled carton feed, folding and erecting station, insertion and transport line, and integrated control stations. The second module includes the collation packer with product grouping, pre-folding station, lifting and transfer system, carton insertion, carton closer, as well as transport and conveyor systems to the discharge point. The high-quality equipment includes an integrated Mettler Toledo Garvens XS3 check weigher (weighing range 7–700 g, resolution 0.1 g), a BLUHM label printing and dispensing system, a Wolke m600 inkjet marking system, and several camera and inspection systems for controlling print quality, labels, and packaging quality. Defective products are automatically detected and rejected. Operation is carried out via several modern industrial touch panels with graphical system visualization. The PLC control system features recipe management, user management, fault diagnosis, message storage, and modern servo drive technology with EtherCAT communication for precise and reliable production processes. The complete system is fully enclosed and equipped with interlocked safety doors, emergency stop devices, safety monitoring, and optical signal towers, meeting high requirements for operator and system safety. Kdedezmp Tqepfx Ah Aep Technical data: Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 System configuration: 2 machine modules Operating voltage: 400 V AC Frequency: 50 Hz Connected load Module 1: 6 kW Connected load Module 2: 3 kW Compressed air: 6 bar Enclosure type, control cabinet: IP44 The scope of supply includes the complete packaging line with carton erector, insertion and packaging line, collation packer, carton closer, transport and conveyor systems, check weigher, labeling and marking systems, camera and inspection technology, control cabinets, and the existing technical documentation with electrical diagrams, pneumatic diagrams, drawings, and parts lists. The system is in very good condition and is currently located in a pharmaceutical plant. Inspections are possible by appointment. Functional videos, further technical documentation, and information on dismantling, packaging, and worldwide shipping are available upon request.

Year of construction: 2025, condition: new, Suction belt with two suction belts Kodpehl H Ikofx Ah Ajdp Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base

Year of construction: 1995, condition: good (used), Reliable Dyno Industrier tray sealing machine, manufactured in Norway. Suitable for meat, fish, poultry, ready meals, cheese, and other food products requiring vacuum or Modified Atmosphere Packaging (MAP). Specifications: Model: DYNO 320VG / 321VG Vacuum + MAP (gas flush) capability Fully operational and currently in production Semi-automatic operation 4-cavity tray mold installed Film roll system included Original operating manual included Pilz control panel Well maintained and ready for immediate use Kdedpfx Ahezkwd So Asp Ideal for: Meat processors Seafood companies Delicatessen producers Ready-meal manufacturers Small and medium-sized food production facilities The machine can be inspected while running and demonstrated to serious buyers. Several molds are available.

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside Kdedpfezl U Uwex Ah Ajp • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. The installed sieve decks have the following sizes: 15-10-5-3-1 mm. Kodpfxjzl Sv Sj Ah Ajdp The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Kdodpfxezl Shzj Ah Asp The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Ksdpfx Ahjxxxqve Asdp Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: good (used), Year of construction: 2011, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Kedpfxswv Rayo Ah Aodp Sample types: Supports standard SBS plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 - 240 V AC 50/60 Hz Power (P): 295 VA max Manufactured: 01/2011 You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, distance between spindles: 600 mm, number of spindles: 2, number of slots in tool magazine: 80, axle spacing: 600 mm, Equipment: chip conveyor, Schwäbische Werkzeugmaschine GmbH Twin-spindle machining center BA 600-2 Year of manufacture: Spindle distance: 600 mm Tool interface: 2 x HSK 100, 10,000 rpm Kodpfx Ahezdq Scj Aedp The machine is still in production and can be inspected during ongoing production. Various repairs are required. 8-station hydraulic clamping system per tool changer.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: XKMP20250407, We offer this brand-new paper bag / bakery bag / kebab bag machine, manufactured in 2025. The machine has been run very little – it was only set up and tested – and is in like-new condition. Machine designation: V-bottom paper bag making machine Manufacturer: Ruian Xinke Machinery Co., Ltd. Kodpfezmw Atjx Ah Ajdp Model: XKJD-400 Serial number: XKMP20250407 Year of manufacture: 2025 Condition: very good (very little use – like new) Functionality: fully functional Disassembly and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. Kdsdpfszmul Sex Ah Aep If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes Kjdpfxjzka Ruo Ah Aodp A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Year of construction: 2026, condition: new, functionality: fully functional, For sale: painted or galvanized skip container, 1000 liters. Product description: We are selling a painted or galvanized skip container with a capacity of 1000 liters, ideal for transporting and storing waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Ksdpfxjzm Erpo Ah Aodp Technical data: • Bottom: 2 mm • Sides: 2 mm • Container frame: 80 x 50 x 4 mm • Internal dimensions: 1950 x 740 x 1090 mm • Stackable (4-high) • Information and warning stickers: white and red • The entire range of RAL colors is available • Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: • Robust construction for heavy materials • Easy handling thanks to stable hinges • Stackable • Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 2.6 cbm skip container with steel lid Product description: For sale is a 2.6 cbm skip container with a steel lid, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: • Base: 3 mm • Sides: 3 mm • Container frame: 70 x 50 x 4 • Lid: 1.5 mm sheet metal • Pins: ø 45 mm • Single tilting bearing (pin ø 45) • Lid opening system • White and red information and warning stickers • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Kodpfozm Emtsx Ah Aedp Easy handling thanks to sturdy hinges Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Open-top skip container, 3000 x 2000 x 1250 mm Product description: For sale is an open-top skip container, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Bottom: 3 mm - Sides: 3 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the bottom of the container Kjdpfszm Eihox Ah Ajdp - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - Full range of RAL colors available - Zinc phosphate coating inside and outside - Primer, outside painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones Ksdpfx Ahezmurre Aedp - die connection IDE M70x2

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set Kedpfx Ajxgpbbsh Ajdp - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request - double strand 2x 5m/min - roller shutter cover width 52mm - fully retracted - includes mounting plate (as shown) to fit on calibration table

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Kdedohx Elfspfx Ah Aop Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Skip container, 5.5 - 12 m³, crane container, waterproof, concrete container Product description: For sale is a skip container, 5.5 - 12 m³, crane container, waterproof, concrete container, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: Standard: Technical description 30720-1 Crane container • Bottom: 6 mm S 355 • Sides: 4 mm S 355, 6 x 200 mm S355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 5 mm • Safety bar Kjdpfx Aszmqnvjh Asdp • Crane hooks x 4 • Frame edges: UNP 120/100 x 50 x 6 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description 30720 -1, waterproof • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 50 x 6 mm • Safety bar • Frame edges: U 100 x 50 x 4 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description • Bottom: 8 mm S 355 • Sides: 6 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 100 x 10 mm • Frame edges: UNP 140/120 • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and stable hinges Stackable and transportable with tilting truck systems Weather-resistant thanks to corrosion-resistant coating

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Ksdpjyxn T Nefx Ah Asdp Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Year of construction: 2008, condition: excellent (used), STULZ ALD 1062 GE precision cooling / close control air conditioning units, designed for data centre, server room and technical cooling environments. The units are manufactured by STULZ GmbH Hamburg, Germany. They are CE marked and operate with R410A refrigerant. Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1062 GE Item No.: A72170 Years available: 2008, 2009, 2010 Refrigerant: R410A Supply voltage: 400V ±10% Ksdpfx Aszklicjh Asdp Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 12.4 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2008 without ECU: 4 units 2008 with ECU: 3 units 2009 with ECU: 1 unit 2010 with ECU: 1 unit 2010 without ECU: 2 units Total available: 11 units

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Kodpfxezklcij Ah Ajdp Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm Kdjdpfx Aewcaqheh Ajp - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2 Kedozmnp Ropfx Ah Aodp

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers Kdsdpfx Ahsw Rldzo Ajp - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.