Used Omnidirectional Barcode Scanner for sale (461)

Year of construction: 2024, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Nlsdpfx Agju Tk Eto Doa Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Njdpoykub Ajfx Ag Djla Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), Year of construction: 2001, functionality: fully functional, working height: 520 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 Nodpfoy Exuwex Ag Dola – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data Nledpfx Aeywhf Nsg Dja X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: excellent (used), Year of construction: 2019, Working area X: 3860 mm Working area Y: 1600 mm Jet Z Super workpiece clearance: 250 mm Nlodpfxey Entpe Ag Dja 5-axis electrospindle Vertical drilling units: 12 Horizontal drilling units X: 4 Horizontal drilling units Y: 2 Grooving saw in X direction 16-position turret tool changer 14-position linear tool changer Working table with 6 bars Vacuum pump 90 m³/h Barcode reader Safety mats Safety fences Weight approx. 4440 kg.

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. Nljdpfeyzpkzox Ag Doa The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL Nlsdpfx Aeyr I H Ueg Dja - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar Nedpfx Ajyzxfnog Djla - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 Njdjyi Twgspfx Ag Djla For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2020, operating hours: 6,162 h, machine/vehicle number: 958-167, Application version: 6.9.3.9, PLC version: 20200618.957, with control PC, flat screen, handheld scanner, keyboard and mouse (without additional monitor), purchase price: net €330,418.50 – see invoice Nledsyidl Eepfx Ag Doa

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard and mouse. Purchase price: net €330,418.50 (see invoice). Nljdpfx Aoyidl Sog Dja

Condition: used, Year of construction: 2021, operating hours: 4,691 h, machine/vehicle number: 964-005, Application version: 7.80.4.1, PLC version: 20230531.96, with control PC SUPERMICRO, flat screen, handheld scanner, keyboard and mouse (without tablet PC and monitor mount), acquisition price: net €623,017.00, see invoice. Nlodpoyidlxjfx Ag Dja

Condition: used, Laser Sintering System Vanguard si2 SLS System, upgraded in 2017 to modern standards Machine Dimensions: Width: approx. 157 cm Depth: approx. 119 cm Nedpfxsyl Tv Is Ag Dola Height: approx. 198 cm Minimum installation space: 4.57 m × 3.66 m × 3.05 m Door height: 2.13 – 2.44 m Floor: Level (max. 25 mm deviation) 50 psf load capacity Non-vibrating Untiled / no carpet Approx. 1,150 kg Process station: 240 VAC ±5 % 3-phase 12.5 kVA Dedicated circuit 4-wire cable Ceiling connection For different voltages: Transformer required: 208→240 V 400→240 V 480→240 V Upgrade Details: UniHeat V5 / 10-zone build chamber heating Layer thickness adjustable via software, all listed materials are parameterized at 0.10mm 70-watt CO2 laser Fully digital, 3-axis high-speed scanning system with "XStream BDS" scanner control system with scan speeds of 6–12 m/s Build rate at medium packing density: 10–15 mm/h 2 x 20kg powder reservoirs integrated in the machine Including unpacking container and manual unpacking station (see pictures in the attachment) Including machine and software documentation in digital form Last maintenance August 2024 (Laser window + ATC sensor new in 2024) Including 2 x nitrogen generators and 1 x cooler included Operating hours: unknown / average use 2x per week The following materials are qualified for a 0.10mm layer thickness: - PA12 - PA2200 / EOS - TPU - natural / Stratasys - PP - natural / Lehmann & Voss - PA12 - PA2210FR / EOS - PA11 - black / AM Polymers (Support is secured despite the closure of LSS, as the service technicians have been taken over by a Belgian company) Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Nsdpfx Aeyz An Tjg Dola

Condition: good (used), Clean Marker Brush V-Series Pickling, passivating, marking, and blasting of stainless steel. Model: Brush-V1 Power Supply: 380 VA or 500 VA Operating Voltage: 230V, 50/60 Hz Nedpsyk Dthofx Ag Dola Protection Class: IP 23 Dimensions (WxHxD in mm): 145 x 250 x 330 Weight: 8 kg Article Number 380 VA: 3150015 Article Number 500 VA: on request Also available as POWER version with 500 VA! - Maximum cleaning efficiency at lowest active agent concentration - Significantly reduces susceptibility to corrosion of treated workpieces compared to similar standard market processes - Minimal or no physiological impact during use - Environmentally friendly, fast, and colour-consistent pickling and passivation of weld seams on stainless steel components Suitable for brush and electrode attachments What materials can be marked? - Steel - Stainless steel - Carbide - Aluminium - Brass - Copper - Zinc - Chrome-plated and nickel-plated surfaces What can the marking be used for? Marking of company logos, type designations, dimensions, manufacturing data, serial numbers, inspection marks, barcodes, assembly and installation instructions, graphics, trademarks, nameplates, equipment numbers, scales, fonts, ... - Dark marking - Easy to use - Works in seconds - Permanent and precise inscription - Removable stainless steel contact plate

Condition: new, In general Minimum diameter of the workpieces: 25 mm Maximum diameter of the workpieces :270 mm Minimum width of the side for hexagonal workpieces: 25 mm Maximum width of the side for hexagonal workpieces: 200 mm Maximum stacking height :2 x 350 mm Maximum stacking weight: 2 x 450 kg Width of the automation: 1,902 mm Depth of the automation :740 mm Height of the automation: 2,202 mm Total weight of the automation: 1,000 kg Electrical connection :380 VAC Pneumatic consumption :< 100 L / min Roboter Payload :25 kg / 19 kg net Payload :35 kg / 28 kg net Nedpfxeh Dw Dij Ag Dola Safety Standard Protection with laser scanner Protection with integrated wall Option Protection with light barrier Protection with separate grid wall Protection with separate transparent wall Protection with sliding doors

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of cooling: air, laser wavelength: 1,064 nm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) Nlodpfx Aewlc Stsg Doa - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) Nlsdswkpvvepfx Ag Doa - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Nljdpfev Sybyox Ag Dja Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, warranty duration: 9 months, type of input current: AC, input voltage: 230 V, overall weight: 52 kg, arm reach: 2,500 mm, number of axes: 7, FARO Quantum Max Arm, X.S, 2.5m, 7 axes (premium model, portable 3D measuring arm) with LLP Price excluding VAT Demonstration unit from October 2024 with manufacturer’s warranty until November 2026 Arm weight: approx. 8 kg; including all accessories, total weight is around 52 kg Serial no. arm: X25S52452233, serial no. LLP: LLP0P2443474, serial no. tripod: 42949 Scope of delivery includes: - FARO Arm Quantum X.S, 2.5m, 7 axes (demo device, 10/2024) - Calibration set - Transport case - Mounting plate - 3mm and 6mm iProbes - USB cable, power supply, 230V Swiss plug - Rechargeable battery - Laser Line Probe for scanning function, FAROBlu xP including calibration set and case - FARO folding tripod - Manufacturer’s warranty until 11/2026 Optional: FARO software available at extra cost after consultation to meet your needs Quantum Max X.S: This is the premium model, delivering industry-leading precision. It is designed for companies that require uncompromising accuracy and performance for their most critical applications, tightest tolerances, and certification processes. The Quantum Max Arm ensures exceptional accuracy and repeatability, making it ideal for solutions in critical quality control tasks, inspections, CAD comparison, reverse engineering, and as-built documentation. The arm is flexible for use both in production (shop floor) and in dedicated metrology labs. The 7-axis model offered here extends its functionality with an additional rotary axis (often at the arm’s wrist). This seventh axis provides enhanced flexibility and maneuverability, especially beneficial when a laser scanner is mounted to the arm. It enables easier movement of the scanner around obstacles and efficient, complete scanning of complex-shaped surfaces. The Quantum Max Arm is compatible with various probes and laser scanners (the FAROBlu® LP is included in this package), highlighting its versatility for diverse inspection requirements. Its intuitive software and user-friendly hardware allow for quick familiarization and efficient workflows. Njdpfx Aoymlybeg Dela Custom-fit measurement accuracy: X.S: Industry-leading, highest precision for critical applications and tightest tolerances. Versatile configurations (axes): 7-axis arm: Additional flexibility and maneuverability, ideal for use with mounted laser scanners and capturing complex geometries. Rugged construction: Engineered for reliable operation in harsh industrial environments with integrated protection against temperature, vibrations, and overload. Portability: Lightweight and portable, enabling measurements directly on the shop floor, in the lab, or on-site—reducing transport time and costs. Wide range of applications: Ideal for dimensional analysis, CAD comparison, quality control, as-built documentation, reverse engineering, component inspection, and certification. Compatibility with various probes and scanners: Adapts to specific measurement requirements (touch probes, laser line scanners). Easy operation: Intuitive user interface and ergonomic design for quick training and efficient workflows. Enhanced data quality: Provides detailed and accurate 3D data for well-informed decisions in manufacturing and quality assurance.

Condition: used, Year of construction: 2018, operating hours: 10,347 h, - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - CNC options: Barcode reader, Offcut conveyor - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpfx Ajxtbgpeg Dsla Glenn Smeets

Condition: like new (used), Year of construction: 2021, functionality: fully functional, STC-Ref:G-821-0097 Duplo DSF-6000-Pro DIGITAL, Year: 2021, total counter: 1,8 Mio. format: 356x525 mm equipped: - 2 x loop stitching heads Duplo i saddle - trimmer DBMS-T Front trimmer - DKT-200 head and foot trim - DBM-LSW belt delivery lang/long - PC-controler - Cut-off device parallel 6mm for DKT-200tr - envelope feeder für/for DSF6000 - touchscreen - batch counter DKT-200 - DSF-6000 digital sheet feeder - barcode kit for cover feeder DSF 6000 - Barcode kit for DSF 6000 content compartment - Duetto LDR connection bridge DSF Nodjv U Tvpopfx Ag Dola - 2 x collating tower DSC-10/60 i - Bridge - DBMS-F collating-, scoring- and plough folding unit - DBMS-S saddel stitcher 2 x Hohner - 2 x spare knives upper knive / lower knive --> available: 04/2025

Year of construction: 2004, condition: used, 2 PCs. PC controlled tool issue cabinets, which are networked to each other! Spiral Edition: 126. spiral places maximum 63 / Cabinet 2520 PCs. product capacity max. 1260 PCs. / Cabinet Nljdpfx Aodt El Hog Doa Electrical connection 230 V / 50 Hz, 16 A Dimensions L x W x H 990 x 980 x 1830 mm / Cabinet Weight approx. 475 kg / unit Accessories / special features: Ideal storage system for non-sensitive products by compact dimensions. Prerequisite is a compact, stable packaging of the individual parts. These parts fall into a padded extraction shaft. -Operation via large touchscreen -Handheld scanner -Documentation New price: 21,000.00 EUR NET Siegfried Volz machine tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Nsdpfx Agoyu Rrxj Dsla Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500–4000 mm, Y: 6000–12000 mm Z-Axis Clearance: 300–700 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks (accuracy class 6), Z axis with ball screw (accuracy class 5) Njden Sk Huspfx Ag Dela Linear Bearings: Trapezoidal guide rails Traverse Speed: up to 80 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW up to 50 kW powered by inverter Tool Taper: ISO30 or HSK63 ER32 Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000; 40,000; 50,000) Construction: Welded, ribbed, stress-relieved steel frame, precision machined Table Type: T-slot aluminum grid, solid aluminum, or solid steel Equipment Options: - Material positioning and correction via camera, laser, or measuring probe - Linear or turret tool magazine - Tool cooling with oil mist or chilled air - 3D scanner (laser or contact) - Positioning bases - Additional angular/rotary axes - Drilling and angular heads - Pneumatic workpiece clamps - Part marking - Integration with industrial robot - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM