Used Omron Inverters for sale (1,790)

Condition: excellent (used), Year of construction: 2020, operating hours: 3,100 h, functionality: fully functional, cooling capacity: 234 kW (318.15 HP), type of cooling: air, aircooled Chiller DATECH/Swegon Cooling cap.234 KW (68,5 refr.tons), 1 circuit with 1 screw compressor,full inverter, Shell&Tube evaporator Cooling agent: R1234ze(GWP< 1) Blodpoy E N Unefx Ad Aog low hours: 3100hr tested,ready for operation

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Bedpfx Asqnufvod Aolg Camam, Comec, OMEF, Brusa di Garboli

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: Ohne, The Solarfold PV Container is an innovative, mobile photovoltaic solution for flexible power generation precisely where energy is needed. The entire solar power plant is housed in a 20-foot high-cube container and can be assembled and commissioned on site in a short time. With an installed capacity of up to 130 kWp and a total of 196 PV modules, the Solarfold offers a powerful, scalable solution for temporary or mobile energy supply. The system is fully pre-configured and pre-wired. Thanks to its innovative aluminum rail system and mobile ground anchors, the installation can be set up without complex foundation work or cable trenches. This makes the Solarfold particularly suitable for projects with changing locations. Technical highlights: Bledpfx Adsytblye Aog Rated power: up to 130 kWp PV modules: 196 units Container: 20' HC (High Cube) Transport weight: approx. 13.5 t Module surface area in operation: approx. 6 m × 123 m Integrated inverter Modules fully pre-wired Rapid assembly and disassembly Advantages: Mobile power generation for flexible sites No soil sealing or cable trenches required High energy yields and short payback period Transportable by truck, train, or ship Typical applications: Construction sites and infrastructure projects Agriculture Industry and commerce Events and festivals Charging infrastructure for e-mobility Temporary power supply or off-grid applications The Solarfold enables sustainable, economical, and flexible power production and can be combined with battery storage systems as required by the project.

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Bljdpfxew Dcb Ss Ad Aeg

Condition: new, Technical specification: - Chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air requirement: 3500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 12,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Illumination: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Inspection valve: Yes - In the picture an example of the configuration of the SCI-800-10 FA The offer includes: - Land Reko SCI-800-10 FA Chamber Cleaner Automatic. Bjdoft Srcepfx Ad Ajlg - Boron carbide nozzles 8 pcs. Big choice between 4 mm and 10 mm - Pneumatic connections - Control panel with inverter system - Roller conveyor with automatic drive 1,5 Lm x 2 - Working pressure control system for sprinkler sections - Automatic sprinkler and grinding valve x 8 - Workpiece blowing system after processing - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors - Free delivery - Device also available in leasing or financing - Device on order. Delivery time 8 weeks from order

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA26VSDFF screw compressor, machine with inverter, after service Technical data: Capacity: 5.15 m3/min; Motor power: 26 kW, Max pressure: 13 bar; Year: 2015 Operating hours: 9845 h 30900 net 38007 gross Compressor fully functional, ready for operation, with warranty. Service provided. Bedpfx Adey Idhno Aslg Link to video below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA18VSDFF rotary screw compressor – machine equipped with an inverter and air dryer, after service Technical data: Capacity: 3.75 m3/min 18 kW motor Max pressure: 12.75 bar Blodpfx Aey Idfysd Ajg year: 2015 operating hours: 7,196 h Price: 26,900 net 33,087 gross The compressor is fully operational, ready for work, and comes with warranty. We provide service. Link to video below.

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing Bljdpfxsy Erxvj Ad Ajg can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, mileage: 459,039 km, power: 375 kW (509.86 HP), first registration: 05/2022, fuel type: diesel, empty load weight: 7,858 kg, maximum load weight: 10,142 kg, overall weight: 18,000 kg, tire size: 385/55 R 22.5, next inspection (TÜV): 06/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,500 mm, total width: 38,810 mm, total height: 59,830 mm, Year of construction: 2021, front tire size: 315/70 R 22.5, Equipment: air conditioning, cruise control, differential lock, navigation system, parking heater, spoiler, Parking air conditioning, work lights, electrically adjustable and heated exterior mirrors, hands-free car phone system for mobile phone, differential lock, electric windows left and right, GX cab, air-suspended driver's seat, leaf/air suspension, 12 gears, air conditioning: automatic climate control + parking air conditioning, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, entertainment: navigation device with display, sleeper cab, 2 sleeping berths, driver's seat heating, sun visor, spoiler package, standard auxiliary heater, tank capacity 490 + 370 litres, cruise control, Safety Package: adaptive cruise control + emergency brake assistant + lane assist, additional brake retarder, Euro 6 E engine, LED rear lights, LED headlights, adaptive cruise control, seat heating and ventilation on driver's side, multi-contour seat adjustment, inverter 2,000 Watt, Bedpfxeyr S E Ue Ad Aelg

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar Bedpfxoyuvwao Ad Aolg 14.70 m³/min

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Bledpfxswzyh Rj Ad Aog Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: R481.5.1284, type of input current: DC, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 8,000 mm, welding power (max.): 301 kVA, protection type (IP code): IP07, We are offering this used Jäckle WIG 301 i DC welding machine, year of manufacture 2016. Blsdpfxey H D Ryo Ad Aeg Manufacturer: Jäckle Model: WIG 301 i DC Year of manufacture: 2016 Control type: Inverter Origin: Made in Germany Serial number: 00218 Certification: CE Protection class: 1 If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: RMZY Series (20 Bar Version) Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Bsdpfxoy Ecu Uj Ad Aelg are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Blodjy Ecuzjpfx Ad Asg Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bodpfx Ajvvi N Isd Ajlg

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Bodpfsvvi Scjx Ad Aslg

Condition: excellent (used), Year of construction: 2015, operating hours: 51,498 h, functionality: fully functional, Atlas Copco GA18VSD+ screw compressor with integrated inverter, 18.5 kW, 13 bar, 3.57 m3/min. Bledpfx Ajyk Rxked Ajg

Condition: excellent (used), Year of construction: 2008, operating hours: 54,551 h, functionality: fully functional, Used oil-free compressor Atlas Copco ZR160VSD, 160 kW with inverter. 10.4 bar, 25.90 m³/min. Year of manufacture: 2008. Bledpfx Adjx A E Euj Ajg

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency inverter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Bedpfx Asy Evkpsd Aelg Fans: 3 x 3 kW Control system: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating system not included! Drying chamber will be professionally dismantled and loaded onto a truck.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Blodofg E H Espfx Ad Ajg Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Bljdpfx Adsxiu Dmo Aeg Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Bodpfx Aoynnhqed Aelg Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 54900 € 1037.61 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 440 mm, quadrat 440 rund 430 mm, quadrat 430 rund 320 mm, quadrat 260 807,5 mm 1.1 kW 4 kW 0.12 kW 2850 mm 2350 mm 2000 mm 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping Bedpeynnhdofx Ad Ajlg micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei Bjdpfeynng Tsx Ad Aelg 22700 € 435.84 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm 430x380 mm 590 mm 0.55 kW 3 kW 0.12 kW 2900 mm 950 mm 1660 mm 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 72800 € 1375.92 € Doppelsäulenführung 9500x54x1,6 mm 20-100 m/min 1020 mm 1020 mm 1020x1020 mm rund 675 mm, quadrat 675 535 mm 2.2 kW Bljdpfx Adeynng Hs Aog 7.5 kW 0.12 kW 4500 mm 1700 mm 2750 mm 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades