Used Ostas Opk 45 for sale (9,384)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Duedpfx Ajx A U Ncod Nst Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, functionality: fully functional, total width: 620 mm, total length: 800 mm, total height: 1,170 mm, Multiple Xerox AltaLink C8130 / C8135 / C8145 / C8155 Series machines available! Lightly used units with low page counts, fully operational. Dsdjy Hua Eepfx Ad Nsut - Supports formats from A6 to A3 - Max paper weight: approx. 300 g/m² - Automatic document feeder: single-pass duplex scanner - Suitable for up to 300,000 prints per month

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 05/2028, Year of construction: 2018, Equipment: ABS, Internal vehicle no.: G400099 German vehicle Located on our premises in Kaufungen – Kassel, immediately available More INFO via Luis Lucena Extendable Unladen weight: 5,450 kg Subject to errors and omissions We are happy to take your used vehicle in part exchange. Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Duodpeyx N R Asfx Ad Nst

Condition: good (used), Year of construction: 2010, 5-axis machining center 2000x4000 complete with suction cups and aggregates Dsdsy Rai Topfx Ad Neut

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm Dusdpfoyzrupjx Ad Net screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Mitre fence (small) Saw blade diameter 250 - 450 mm Dujdpsy Icbgsfx Ad Njt

Condition: used, Year of construction: 1977, centre height 450 mm centre distance 6150 mm spindle bore 140 mm turning diameter over bed 900 mm turning diameter over slide 660 mm spindle drive 15 kW external dimensions Breite 1750mm length 9000 mm height 1650 mm weight 8000 kg spindle speed: 11-500 UpM With a chuck, collet, and faceplate Dedpsy Hl N Rofx Ad Njut

Condition: used, Year of construction: 2010, Equipment: all wheel drive, Internal vehicle no.: T200028 German vehicle Available immediately at our yard in Kaufungen, Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: Manitowoc Load moment: 1230 kNm Carries 45 tons at a reach of 2.5 m Lifting capacity: 35 t at a reach of 3 m Maximum load moment: 125 kNm Reach: 34 m MAX. reach: 47 m 360-degree rotation Dusdpfx Adoynu Tgo Not Combined engine for travel and crane operation, HINO E 13 C, 6 cylinders, Euromot III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: * Internal number: T200028 * Purchase price: €109,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,700.49 * Final value: €22,000.00 If you are interested in this offer or require an adjustment to suit your needs, please contact us (Mr. Enchev). We look forward to your call. Subject to errors and prior sale. We are happy to accept your used vehicle as a trade-in. In-house financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/4,500/6,000/8,000/10,000 rpm with digital readout Useful spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle MK 5, diameter 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment: electric with digital readout Spindle tilt adjustment: electric with digital readout Fence adjustment: manual with fine adjustment Dujdpfx Adsyynpto Nst Spindle reversal (right/left rotation) CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Including round arch milling fence Including interchangeable spindle MK 5, diameter 25 mm Including interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H) approx.: 2650 x 1250 x 1700 mm Weight approx.: 1000 kg HOLZHER feed unit 3 rollers 8 speeds Note for used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex location—loaded free onto transport! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (Please respond to enquiries only with your address and telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use Dodpfx Aoiknp Rjd Neut 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic Dusdodibw Aspfx Ad Net saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA Duodpfx Adeq U Rm Hj Njt axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2016, operating hours: 11,629 h, fuel type: diesel, motor manufacturer: yanmar, Field of application: Construction Please contact Kristoff Van Havere for more information Dedpfxoy Hbq Do Ad Neut

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Dusdpsy Icr Eofx Ad Not Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Dsdpfx Aoy Ib D Hod Nsut Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Dusdpfx Adjy Ibivj Net Stator knives: 2 Rotor knives: 4

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: SN376848, functionality: fully functional, 12 months warranty, available for immediate delivery Electrically heated circulating air chamber furnace Nabertherm NA 500/45 - Max temperature: 450 °C - Internal dimensions (W x D x H): 750 x 1000 x 750 mm Dujdpfx Ajya D Ausd Nst - External dimensions (W x D x H): 1400 x 1910 x 1810 mm - Volume: 500 liters - Nabertherm Controller P300 (9 programs with 40 segments each) - Feedthrough, e.g. for thermocouples - Alarm indicator light - Pneumatic lifting door - Power: 18 kW - Weight: 800 kg - Documentation, CE declaration - Electrically tested and provided with a current DGUV test protocol - 1 extra tray available from stock on request! Inspection at our warehouse possible at any time! All devices are electrically tested and supplied with warranty. Furnace, furnaces, industrial furnace, curing oven, heat cabinet, heating oven, laboratory oven, drying oven, tempering oven, chamber furnace, kiln, hardening furnace, hardening ovens, annealing furnace, annealing ovens, tempering furnace.

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Dujdpfey Igxiox Ad Net

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, FIRE-galvanized, reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, loading height approx. 900 mm, front wall approx. 1,600 mm high, 14 x stanchion pockets in outer frame, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for, aluminum ramps = price: 1.900 ¤, , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Dujdpfxoy Igw Se Ad Njt

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,140 mm, length low bed approx. 8,600 mm, loading height approx. 900 mm, for 2-axle and 3-axle tractor unit, front wall approx. 1,600 mm high, 18 x stake pockets in outer frame, 3 x cross stake rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for aluminum ramps, Price: 1,900 ¤, , Spare wheel, Price: 300 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Dsdpfxjy Igw Es Ad Nsut

Condition: good (used), amount 42 STK - Various KOMET tool holders, partly holder with ABS connection - including tightening bolts (41 pcs.) and various other tool holders, including storage and transport trolley transport trolley Dsdpfxoy H Nzdo Ad Nsut Year of manufacture: unknown

Condition: used, We are offering used grating panels here. TECHNICAL DATA Dimensions: 600 x 1,700 x 38 mm Grid size: 45 x 20 mm Surface: galvanized Condition: used PRICE €100.00 net per unit (10 pieces) €119.00 gross incl. VAT Available quantity: 124 pieces YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or dispatch can be arranged for an additional charge. Additional costs depend on the delivery location and scope of shipment and can be provided on request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon order placement. The price is quoted per item/net price unless otherwise stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US Dedpfxey H Hbbs Ad Neut DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machines for commerce, industry and trades. We continually offer attractive second-hand deals from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. Four wins – The building blocks of DLK's success: Storage technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Duedpfx Ajy Hq N Asd Net Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Tilting Spindle Moulder KÖLLE F45 with power feed and integral fence Very good condition; the machine comes from a small model making workshop and has only seen light use. Everything works perfectly. All bearings and guides are in proper condition; the machine runs extremely smoothly. Year of manufacture: 1992 The moulder fence features one adjustable jaw with fine adjustment and scale, enabling jointing operations such as for gluing profiles. The entire fence can also be accurately and quickly adjusted in depth via a handwheel and leadscrew, with the milling depth displayed digitally. Spindle locking by lever. The machine is equipped with an eye-level control panel. Fitted with AIGNER integral fence. Efficient chip extraction with two extraction ports (125 mm and 100 mm). Equipped with a 30 mm spindle, continuously tiltable from -5 to 45°, tilting is electrically operated; for fine adjustment, there is a handwheel and digital readout. A 40 mm spindle can also be installed. Reverse/forward rotation capability. Nationwide personal delivery and demonstration within Germany for €220, eliminating all risk on purchase. Shipping to Austria and other EU countries available on request. Large table opening, adjustable by multiple insert rings (enabling use of both large and small diameter cutters with optimal safety). Spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment via handwheel and digital readout. Includes 2200 mm long extendable auxiliary support. Very robust and durable construction, built for heavy-duty milling tasks and suitable for all routing operations. Optimal power transmission via belt drive system. Supplied with operating manual. Includes 4-roller HAFFNER power feed, model 904. The feed unit features forward/reverse operation and 4 speeds, with individually mounted feed rollers. Machine table is 1200 mm wide and 1000 mm deep, with 500 mm table extensions on both left and right sides. Dsdpfx Adoy Hxtpj Neut Ready to use immediately. 380V, 6000 and 8600W motor thanks to two speed ranges; fitted with a heavy-duty motor. Comes with all necessary safety features, including motor brake and emergency stop. The machine is certified by the Woodworkers' Professional Association and carries the GS tested safety mark. Weight: approx. 1000 kg Fitted with motor overload protection. Professional-grade machine, not DIY store quality. Optimal, simple, fast, and safe handling.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,310 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Dsdoy E Hwgopfx Ad Nsut THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck ; BIO-Diesel proof 385/65R22.5 13311 mm 2490 mm 2650 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top