Used Otinus Lwh-2000-N Raytools for sale (57,171)

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Iodpfxsivta Ns Apcsar mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. Iedpfow Emh Sjx Apcoar All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment Iaedpfevhpr Hjx Apcer * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Iedpfx Apeycr Nhocjar Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled but has a fault, which is why it cannot be shown under power. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Wide span shelving, new dimensions: L 2550 x H 2000 x D 600 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load Iaedpfscfb Alox Apcor #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2440x545mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2050 x H 2000 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load Iaedpfx Ajcfb Abspcsr #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2050 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: Iaedpfx Ajcfbzyepcer 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x745 mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2550 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, Isdocfb Apepfx Apcear plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm

Condition: used, - 4x4- Swivelling, - Tipper Iodpfx Ajyflg Ejpcoar

Condition: new, empty load weight: 6,900 kg, maximum load weight: 14,100 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,250 mm, loading space width: 2,300 mm, loading space height: 1,220 mm, loading space volume: 15 m³, total length: 2,550 mm, total width: 2,870 mm, total height: 7,580 mm, suspension: air, tire size: 600/55 R26.5, front tire size: 600/55 R26.5, rear tire size: 600/55 R26.5, construction height: 2,880 mm, Equipment: compressed air brake, truck registration, | FARMTECH GRAVIS 2000 Heavy-Duty Tipper Trailer | FAD axles with oscillating axle assembly and drum brakes (ADR brake axles) | HARDOX® steel floor and sides: 8 mm / 6 mm | Loading dimensions/deck: 5250 x 2300 mm | K80 ball coupling | Swing brake for hydraulic tailgate, adjustable tipping angle | Tires: 600/55 R26.5 | New vehicle. Sale to commercial customers only. Subject to errors and prior sale. | Oscillating axle assembly for vehicles designed for extreme operating conditions in particularly challenging terrain! | ADR brake axles are specially designed for overrun brake systems, offering a cost-effective and environmentally friendly solution. They are suitable for trailers with a permissible total weight of up to 8,000 kg and can be combined with various braking systems. Iasdpfxjygw Dfj Apcor

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz Iedpfslatz Djx Apcjar - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65 Isdpfjk Eakvsx Apcsar

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine suffered transport damage and will be completely overhauled mechanically and electrically before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm (Press will be delivered with a brand new table plate, T-slot design of your choice) Ram dimensions: 1500 x 1000 mm Control: SIEMENS S7 1500 series, Year of manufacture: 2020 Iodjw H Arvjpfx Apcjar

Condition: like new (used), Year of construction: 2025, KraussMaffei Injection Moulding Machine KM 320-2000 PA CN Year of manufacture: 2025 Machine equipped with a five-point, double toggle lever clamping unit (three-platen system) with a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics. Iasdpfxoyft Nzj Apcer Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar spacing (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater capacity: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 2000 kVA high voltage diesel uninterruptible power supply (UPS) system with two output buses for sale Technical data: 2000 kVA, 10 kV, 50 Hz, power factor 0.8, 1500 rpm The system consists of: • Power generation module (PGM) - diesel engine with optimized emissions, induction coil, synchronous generator; • Starter; • Battery (Pb); • Redundant start panel RSP; • Diesel generator automatic oil lubrication equipment; • Unit control panel UCP with touch screen and diesel reduction start module; Iaedpfxsyfprfo Apcer • Auxiliary control panel ACP for radiator and fuel tank control; • High voltage unit reactor panel URP, 10 kV; • Generator transformer panel GTP 660V /400V; • Block transformer panel UTP 10 kV/660V; • Bypass control panel BCP and auxiliary panels DCP and ADC, BCP capable of controlling six (6) parallel operating systems with programmable logic controller PLC. DCP for powering auxiliary medium voltage DC circuits, ADC for alternating current supply to UPS control panels 400V, 320A block. Interfaces of high voltage switchgear with diesel UPS control panel via Modbus and I/0 modules. • Monitoring - standard monitoring system for graphical and digital display of current and stored data, alarms; • Main input power cabinet (MPB), which consists of an input input main cabinet and an output main cabinet: • Input main power cabinet (IMPB) - metal enclosure. for medium voltage distribution, 10 kV, 16 kA - 1 sec., 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: 2 x input circuit breakers Q7A and Q7B, l x UPS system circuit breaker 1Ql, 1 x bypass disconnection panel Q3A and a measurement panel. Must be able to transmit data to the UPS system via Modbus interface; • Output main power cabinet (OMPB) - metal closed, for medium voltage distribution, 10 kV, 16 kA - 1 sec. 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: lx bypass circuit breaker panel 1Q3A. 1xUPS output circuit breaker 1Q2A, 1 x UPS output circuit breaker Q4A, l x UPS output disconnection Q4Ad. 2 measuring panels, 1 x output switch Q80A. Modbus interface with UPS system control panel; • Exhaust system with muffler, exhaust manifold, two flexible connections for diesel exhaust outlets; • Cooler with horizontal radiator cooler (directional blade fan) for diesel cooling with six flexible bellows for connecting drying pipes.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Isdpfx Apoufhzvocsar This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera Iaedpsmnp Afofx Apcer * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Condition: used, operating hours: 7,136 h, functionality: fully functional, machine/vehicle number: TB1113, mileage: 61,907 km, power: 75 kW (101.97 HP), first registration: 12/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, next inspection (TÜV): 01/2028, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, soot filter, * Hako Citymaster 2000 sweeper * 3rd brush system sweeper * From 1st hand former municipal / authority vehicle * Approved as a self-propelled machine (environmental sticker exempt) * Approval as 3500 kg machine, drivable with all car driving licenses * Upweighting to 4900 kg possible * On request, the major engine inspection with timing belt, water pump, oils and filters can be carried out by us when the machine is sold * VW TDI industrial engine (4 cylinders) * Low-emission Euro 5 * Diesel particulate filter * High pressure pump with high pressure lance * 4293 sweeping operating hours Iasdpfxjh Un Uze Apcsr * 7136 total operating hours * Joystick control * Weed brush possible on the portal arm brush * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pump for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * Swivel seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from - o'clock, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given priority, this applies to our entire vehicle stock. * The above information is non-binding, errors/changes and prior sale reserved!

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm Ijdpou Sn Hzofx Apcjar X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm X-axis:175mm Iasdpfx Aoyavz Aopcer Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Tool turret Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: new, The Servoturn 500/2000, a remarkable addition to the category of Conventional Horizontal Lathes, excels within the Servo-conventional Lathes group. This KNUTH machine combines cutting-edge feed technology with robust mechanical engineering, featuring ball screw drives and electronic hand wheels on all axes, ensuring precision and efficiency typically found in modern CNC machines. Users will appreciate the ease of selecting feed and thread pitches electronically without the need for gear changes. The Servoturn boasts a heavy ribbed machine bed and high-quality servo drives, allowing for a stable and dynamic operation. With a turning diameter over the bed of 500 mm and a center width of 1,950 mm, it accommodates various machining tasks. Standard equipment includes a quick-change tool holder set, an electronic hand-wheel system, and a coolant system, further enhancing its versatility. If you’re ready to upgrade to a robust and precise machine, you can request a quote for the Servoturn 500/2000 in the Servo-conventional Lathes category today. Iasdel Iy Sxjpfx Apcjr

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs Iaedpfjibw Sxsx Apcor - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve Iaodpfx Apsigwcyscsr -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 50.0 PTFE VA -Connection: DN50 PN16 -Dimension: 290/103/H260 mm -Weight: 4.4 kg

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Subframe: longitudinal member -Type: Length 2000 mm -Number: 65 pieces of longitudinal beams available Iasdev U T Hhopfx Apcer -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 2000/120/H110 mm -Weight: 12.4 kg/piece

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Subframe: longitudinal member -Type: Length 2000 mm -Number: 50 pieces of longitudinal beams available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 2000/45/H140 mm Iodpfxev U T H Is Apcsar -Weight: 7.3 kg/piece