Used Otto Fleischer Einpacker for sale (314)

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: gas, color: blue, first registration: 01/2007, Year of construction: 2007, driver cabin: other, Vehicle location: Bovenden, Former combined heat and power unit from a neighboring hospital! Combined heat and power unit for natural gas operation with an electrical output of 48KW & thermal output of 80KW. 4-cylinder gas Otto engine! Engine type MAN E 0834 E Iedjl Rbtnjpfx Acgoau Generator type Marelli MJB 225 MA Rated voltage 400V ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 351 h, load capacity: 300 kg, lifting height: 13,700 mm, fuel type: electric,

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 06/2026, fuel type: gasoline, overall weight: 1,910 kg, color: white, gearing type: mechanical, number of seats: 2, total length: 4,343 mm, total width: 2,076 mm, total height: 1,853 mm, loading space length: 1,802 mm, loading space width: 1,535 mm, loading space height: 1,262 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 42501 Errors and prior sale excepted! LOCATION: 04758 Oschatz, Filderstädter Straße 10 Contact number for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or schieler(at) SPECIAL EQUIPMENT: * Load securing package: cargo area rails in the middle position and 10 lashing eyes * Wheels: steel rims 6 J x 15 with 195/65 R15 all-season tires, suitable for winter use * Winter Package 3: heated windscreen – heated steering wheel – Seat Package 6: – driver’s seat adjustable in 6 ways and heated – front passenger seat foldable, retractable, and heated – lumbar support for driver’s seat – armrest for driver’s seat – partition with loading hatch without window ADDITIONAL EQUIPMENT: * 12-volt outlet in the passenger compartment * Passenger side airbag with deactivation function * Driver’s side airbag – side airbags – left and right * Exterior mirrors electrically adjustable and heated, plastic housing * On-board computer with consumption and mileage information (e.g., remaining range) and external temperature display * Double-wing rear door * Tachometer * Third brake light (LED) * ESP * Remote central locking with two foldable keys * Ford Easy Fuel – comfort fuel filler cap and misfuelling prevention * FordPass Connect * Rubber mat in driver’s cab * Glove compartment with lid * Interior lighting with delay and front reading lights * Manual air conditioning * Cargo area lighting * Steering wheel: audio remote control on the wheel * Large center console * Fog lights * Emergency brake light – pulsating brake lights during hard braking * Emergency assistance * Otto particle filter * Driver assistance package 1 – Ford Audio – Pre-Collision Assist, camera-based – High Beam Assist – Lane Keeping Aid incl. Lane Keeping System – Cruise control – Intelligent speed limiter with speed limit display – Driver drowsiness alert – Wrong-way alert – Traffic sign recognition – Rear park pilot system – Electric front windows with quick-down for the driver * Upholstery: fabric 'City' * Radio: Audio System 2 – Ford SYNC 4 with 8-inch touchscreen – DAB/DAB+ – 4 front speakers – USB port – Bluetooth hands-free and audio streaming – Android Auto and Apple CarPlay (wireless connection) * Radio accessories: front USB ports * Tire repair kit * Tire pressure monitoring system * Intermittent wiper control * Sliding door right * Seat belts – belt tensioners and force limiters in front – seat belt warning system for driver and passenger * Sun visor, passenger side with mirror * Sun visor, driver’s side with ticket holder and mirror * Start-stop system * Daytime running lights Iedpfjy H T Sasx Acgsau * Immobilizer * Central locking with remote control * Overhead console (standard) ... and much more. 1st owner. German specification. Errors and prior sale excepted. 2 years manufacturer’s warranty from first registration (extendable on request). We are happy to accept your vehicle as part exchange. Financing/leasing possible even with no down payment! Any questions? We are happy to advise you! Despite ongoing inspections, deviations of the vehicle from the description above cannot be excluded. Please note that this vehicle description serves solely for the general identification of the vehicle and does not represent a warranty in the legal sense of sales law. Only the agreements in the contract are binding.

Condition: used, first registration: 07/1980, color: grey, gearing type: mechanical, suspension: other, , Otto Klein water barrel vacuum barrel capacity 4.000 l year of construction 1980 suction hose pump overhauled hydraulic opening/closing immediately ready for use FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE For further questions please contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Isdpfxot Aikue Acgsau

Condition: used, maximum load weight: 7,500 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2012, next inspection (TÜV): 04/2026, loading space length: 5,035 mm, loading space width: 2,424 mm, loading space height: 400 mm, Equipment: ABS, Leaf suspension, steel rims, air brake, drum brake, metal floor, used vehicle Isdpjy I H Rljfx Acgoau Vehicle no. 3296, Münz Otto TDAK 10 three-way tipper with lowering function, ABS, tyres: 235/75 R17.5, leaf suspension, drum brakes, 10 retractable lashing eyes on the loading platform, 2 retractable lashing eyes on the front wall, metal loading floor, front support leg, galvanised, rear body can be lowered for loading construction machinery, continuous loading ramp at the rear, height-adjustable drawbar, platform dimensions LxWxH: 5,035 x 2,424 x 400 mm, loading height approx.: 850 mm, unladen weight: 3,500 kg, maximum weight: 11,000 kg. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Technical data Manufacturer: HKS Type: 34MG Year of manufacture: 1994 Drill spindle mount: MK 4 Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Drill spindle stroke: 170 mm Iasdozbr Ibjpfx Acgou Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2008, power: 11 kW (14.96 HP), stroke length: 180 mm, throat depth: 335 mm, Equipment: CE marking, Hydraulic press brake Manufacturer: DURMA, Type: E-30120 Year of manufacture: 2008 Technical data: Manufacturer: Durma Type: E-30120 Year of manufacture: 2008 Press force: 120t Working length: 3050 mm Stroke of upper beam: 180 mm Throat depth: 335 mm Distance between uprights: 2550 mm Dimensions: approx. 3.25 x 2 x 2.65 m Connected power: 11 kW Weight: approx. 7,400 kg Equipment: • Amada tool clamping system • Durma DU 6000 control system • Sick C-4000 safety device • CNC-controlled crowning • Controlled axes: Y1, Y2, X • R axis + Z axes manually adjustable • 2 support arms, laterally adjustable • Tool package Iaedpfx Aszbixkocgeu Upper die, straight, segmented approx. 3300 mm, R0.8 75° Upper die, bent, approx. 3300 mm segmented Lower die, 4-way block: V16, V20, V35, V50 All information without guarantee. The machine comes from the workshop of a Hamburg film studio. A demonstration with power supply is possible at any time.

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle Iasdjxxraqspfx Acgou - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Ijdpeza Hxrsfx Acgoau Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Iasdpfjza D Eijx Acgju Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm - Max. after-cut height 120 mm Ijdpfx Acjza Aafegeau - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor - Motor power: 1.5 kW - 2 roller conveyors

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a dual miter saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all miter angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. Connection to window construction software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC - Additional clamping device on the roller conveyor Iodpfx Ajzav U Nocgoau - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software possible (Orgadata, Unilink, Wiktop... etc.)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic, extremely little use – like new Protective film still in place in many areas -Double miter saw with program/positioning control -Electrically adjustable saw head, V = 20 m/min -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in oversized cutting mode -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the cutting heads -Miter range from 90° to 22.5° (outward) -Saw heads with automatically controlled full-protection guards -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Label printer for marking profiles Ijdezav A Tjpfx Acgoau -Long roller conveyor -Additional tensioner on the roller conveyor -Horizontal + vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized cutting -Shortcut -Crosscut -Automatic cutting -Automatically extending profile support

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 4,000 mm, saw blade diameter: 500 mm, total length: 5,500 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, overall weight: 1,400 kg, -Double-mitre saw with program-/positioning control -Electrically adjustable saw head, speed V = 20 m/min. -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in overlength mode -Min. cutting length at 90° = 225 mm -Horizontal swiveling of the saw heads -Mitre angle range from 90° – 22.5° (outward) -Saw heads with automatically controlled full guard -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping Machine includes the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Profile height measurement -Long roller conveyor -Horizontal + Vertical clamps -Macro function (ideal for mosquito screen manufacturers) Iaodpfszav Atox Acgsu -Overlength cut -Shortcut -Crosscut -Automatic cut

Condition: excellent (used), functionality: fully functional, mileage: 754,671 km, power: 350 kW (475.87 HP), first registration: 02/2021, fuel type: diesel, empty load weight: 10,470 kg, maximum load weight: 15,530 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 01/2027, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2021, Equipment: air conditioning, cruise control, full service history, hill-start assist, lane keeping assist, navigation system, parking heater, retarder, seat heater, trailer coupling, Mercedes Benz Actros 2548/Angel Mirror/Valid until: 01.2027/Xenon/Retarder • Manufacturer: Mercedes Benz • Model: Actros 2548 • Mileage: 754671 km • First registration: 22.02.2021 • Power: 350 KW/475 HP • Transmission: Automatic • Angel Mirrors • Navigation system • Retarder • 2-bed system • Foldable Bear loading platform • Xenon headlights • 630 liter diesel tank • Trailer coupling • AdBlue • Air/Air suspension • Lift axle • Roof hatch • Lane keeping assist • ASR • Hands-free system • Heated seats • Differential lock • Hill start assist • Auxiliary heater • Bluetooth • Euro: 6 • Valid until: 01.2027 • Unladen weight: 10470 kg • Payload: 15530 kg • Permissible total weight: 26000 kg Isdpfx Asza Eg Uecgeau • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Ijdpfx Acezcpu Isgjau Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. The machine is supplied complete with: - 10.4" LCD monitor - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer Iedpfxjzcmhxo Acgeau - spindle cooling system - 30 bar high-pressure system - refrigeration system - belt-type chip conveyor - rigid tapping

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table length: 3,060 mm, table height: 930 mm, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, overall weight: 7,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. Iodpjzcmabefx Acgsau We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: excellent (used), functionality: fully functional, mileage: 669 km, power: 294 kW (399.73 HP), first registration: 06/2023, fuel type: gas, empty load weight: 9,350 kg, maximum load weight: 9,294 kg, overall weight: 18,644 kg, axle configuration: 4x2, wheelbase: 38,000 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,550 mm, loading space width: 2,400 mm, Year of construction: 2023, Equipment: differential lock, full service history, hill-start assist, lane keeping assist, retarder, seat heater, trailer coupling, Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf Spring Suspension/Trailer Coupling • Manufacturer: IVECO • Type: S-Way 400 • NEW PRICE from €210,000 • Mileage: 669 km • First registration: 06.2023 • Power: 294 kW / 399 hp • Transmission: Automatic • Body: Meiler three-sided tipper • Loading area: L: 4.55 meters x W: 2.40 meters • CNG/Natural Gas • Wheelbase: 3.80 meters • Retarder • Air conditioning • Cruise control • Hill start assist • Lane keeping assist • Starting assist • Differential lock Isdpfx Aszavzcscgeau • Hands-free system • Tachograph • Roof hatch • Heated seats • Trailer coupling – Duo-matic and standard connections • Trailer hydraulics • Automatic lights • Heated side mirrors • Xenon lights • Euro: 6 • Unladen weight: 9350 kg • Payload: 9294 kg • Permissible total weight: 18644 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 550 mm, total length: 7,500 mm, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, saw blade bore: 32 mm, Emmegi Twin 550 double mitre saw for aluminium and PVC. The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor from 45° (internal) to 22°30’ (external) with a precision of 240 positions per degree. The machine features the following accessories: -Preparation for a label printer, which enables labelling and assignment to the corresponding order Isdpfx Ajzak Iqecgeau -Retractable material support -Support for long profiles (roller conveyor) -Industrial PC with Windows Embedded -Additional tensioner on the roller conveyor -Pro software package -Overlength cut -Cross cut -Shortcut -Automatic cut -Connection to window construction software (orgadata / Unilink / Wictop...etc) possible Well-suited for precise and industrial processing of profiles in window and door manufacturing.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Motorized guillotine shear Manufacturer: HM, Model: JBS 2000 x 3mm Year of manufacture: 2017 Iajdszaawhopfx Acgju Technical data Manufacturer: HM Model: JBS 2000/3.0 Year of manufacture: 2017 Usable length: 2025 mm Sheet thickness: 3.0 mm Shear angle: 2° Motor: 4 kW Dimensions: approx. L 2.65 x W 1.85 (plus 0.4m support arms) x H 1.40 m Weight: approx. 2 t Equipment - Cutting line illumination with LED - Controlled back gauge 600 mm - Rear safety guard using a light curtain - Rubber-coated clamping beam - Self-lubricating guide rails - Angle stop - 2 x support arms - Operating manual - Small parts chute towards the front All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Year of construction: 2019, condition: excellent (used), We offer you: Cleaning table Manufacturer: krummtec Type: CleanLine Vario 2600 Year of manufacture: 2019 Technical data: Power connection: - Voltage: 400 V, 50 Hz, L1, N, PE - Connected load: 1 kW Iedjwy Dzrspfx Acgjau - Fuse rating: 4.4 A Cleaning parameters: - Compressed air: 6 bar Dimensions: - Height: 2040 mm + filter - Width: 1500 mm - Depth: 1148 mm - Usable area: 628 x 926 mm - Weight: 710 kg Table hydraulics are defective Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMC 80 FD duoBlock Year of manufacture: NEW Control system: Celos with Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1050 mm Z-axis: 850 mm Main spindle: Tool interface: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool positions: 123 Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist separator system - Chip conveyor - Rotating viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine of the loading station with a 15-inch TFT screen - Internal coolant system (IKZ), frequency-controlled 10 bar – 80 bar / 31 l/min through the spindle center (AD) - Flushing gun for chip flushing - Cooling device with compressed air through the spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in the work area Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, IKZ flow monitor - Condition Analyzer - proTIME - 4-color signal light - Operating mode 4 - Accuracy package - Electronic handwheel - Energy meter for CELOS Iajdoy U Hlpepfx Acgsu - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Accessories, illustrated tools and clamping devices are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500x6mm Year of Manufacture: 2000 Technical Data Iodey U Ec Hopfx Acgoau Manufacturer: HERA Type: SM 4 Year of Manufacture: 2000 Capacity: 2520 x 6 mm Upper ram stroke: 450 mm Lower ram adjustment: max. 100 mm Bending ram adjustment: max. 100 mm Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Equipment • Sharp die • Bending die • Segmented bottom die set (total length approx. 2000 mm) • Motorized bending ram adjustment • Controlled back gauge 10-1000 mm • Siemens S7/Simatic OP7 control system The machine is in good condition. It comes from the workshop of a correctional facility. All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: used, mileage: 51,500 km, power: 220 kW (299.12 HP), fuel type: hybrid, gearing type: automatic, first registration: 11/2022, next inspection (TÜV): 11/2027, emission class: euro6, color: blue, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special Equipment: Business Package, e-tron Compact Charging System, Driver Assistance System: Passenger Protection System (Audi pre sense Rear), Comfort Auxiliary Air Conditioning, Adjustable Headrests, Alloy Wheels 8x18 (5-spoke, for winter tires), Metallic Paint, Rearview Camera Iajdeyihd Sopfx Acgeu Additional Equipment: Deactivatable passenger airbag, Front driver/passenger airbags, Acoustic pedestrian protection, Exterior sound (e-sound), Audi connect (internet-based services), Audi connect (emergency and assistance system), Audi Drive Select, Left and right aspherical exterior mirrors in body color, Matte black control elements, LED indicator lights integrated into exterior mirrors, Fabric headliner in silver, Entry sills with aluminum inserts, Electric motor 105 kW (hybrid drive), Driver assistance system: Brake Assist (Audi pre sense front), Driver assistance system: Passenger Protection System (Audi pre sense basic), Lane departure warning system, Driver information system (FIS) with color display, Rear seat bench (3 seats), Heat-insulating windshield, Electrically operated tailgate (open/close), Automatic tailgate opening, LED taillights, Hybrid, Hybrid 220 kW (2.0 L - 195 kW TFSI engine), Interior trim: Fine lacquer inlays, ISOFIX child seat mounts, 4-door body, Digital instrument cluster (virtual cockpit), 4-zone comfort automatic climate control, Head airbag system (sideguard), Fuel tank: 52 liters, Charging port (AC / DC), Charging cable with Schuko plug, Charging cable with Type 2 plug (Mode 3), Steering wheel (sports/leather - 3-spoke, flat-bottomed) with multifunction and shift paddles, Steering column (steering wheel) mechanically adjustable height/length, Alloy wheels, Multi-Media Interface MMI Basic Plus / MMI Radio Plus, Multi-Media Interface MMI Navigation Plus with MMI Touch, Non-smoker package, Otto particulate filter (OPF), Progressive steering, Digital radio reception (DAB), Tire repair kit, Tire pressure monitoring display, Split/folding rear seat backrest (40:20:40), Low-emission per Euro 6d emissions standard, Heated windshield washer nozzles, Luggage compartment rail system, Front side airbags, Manually adjustable front seats, Front sport seats, Standard suspension, Start/stop system, Bumper version: basic, Jack, Heat-insulating glazing (side/rear), Central locking / Keyless-Go start system