Used Paperplast Dry 70 - 102, Samal 102X114 for sale (16,181)

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Godjtu H Eiepfx Afuebu Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Nord, spur gear motor with brake -Type SK 32-112 M/4 BRE60 i= 20.70 -Speed: 70 rpm -Engine: Type SK 112M/4 BRE60 -Power: 4.0 kW / 1445 rpm Gbedpst E D E Esfx Afueu -Voltage: 400/690 VDY -Shaft: Ø 40 x 80 mm -Brake: 60 Nm -Dimensions: 745/260/H280mm -Weight: 76 kg

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW Gedpfx Aot Hwfnefuebu - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, functionality: fully functional, Year of construction: 2003, load capacity: 7,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Gedpfsu Ac Etsx Afusbu Mast type: Standard Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 7,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,700 mm, drive type: Diesel, Sideloader Gbsdpou Ac Hksfx Afuju Mast type: Standard Condition: Ready for use and fully functional Technical condition: good

Condition: used, Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 -Flow rate: 20-80 l/min -Engine power: 0.9 kW Gedpfx Afoux Sbceusbu -Speed: 2800 rpm -Pipe connection see photos -Dimensions: 385/210/H250 mm -Weight: 13.4 kg

Condition: good (used), Servo motor, geared motor, electric motor, three-phase motor -Handover in its current state as shown in the pictures -Cable connection is loose -Manufacturer Motor Lenze Type: MDFKARS080-22 -Manufacturer of gearbox: Lenze, type: GST07-2NVCK2E Gbedpfxscqhlco Afuju -Power: 3.9 kW -Speed: 70 rpm -Shaft: Ø 40 mm -Design: B5 -Protection class: IP 55 -Number: 1x motor available -Dimensions: 720/200/H245 mm -Weight: 53 kg

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Godpfx Asdktnkefuebu

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel -Cloth rag with abrasive fabric grit 220 -Diameter: Ø 160 mm -Width: 40 mm -Hole: Ø 30 mm Gbedpfxob A Nnks Afueu -Number: 6 brushes available -Price: per piece -Weight: 0.4 kg/piece

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 200 mm -Drawing with the photos Gedpfxeb A Rfpo Afuobu -Weight: 8 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 680 mm -Height: 650 mm Godpfeb A I Imex Afuebu -Depth: 700 mm -Quick-change mount -Intermediate mounting dimension: 260 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 230 kg

Condition: good (used), adjustable geared motor, electric motor, electric geared motor Godpsb A R S Iofx Afuobu -Speed: 14-70 rpm -Power: 4 kW -Design: B5 -Shaft diameter: Ø 48 x 110 mm -Protection class: IP 54 - Electrically adjustable: via geared motor -Dimensions: 1100/350/H600 mm -Weight: 250 kg

Condition: new, Year of construction: 2026, CORMAK DI329 – Compact Dry Ice Cleaning Machine The CORMAK DI329 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI329 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–5.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI329 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI329 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI329 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 1100 W Power supply 230 V AC, 50 Hz Air consumption 1.0–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–3.2 kg/min (adjustable) Dry ice hopper capacity 7.5 kg Gedpfx Afjzwfu Sjuebu Weight 65 kg Dry ice pellet size 3.0–5.0 mm Drive system Direct drive Machine dimensions (L × W × H) 670 × 460 × 900 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 260 mm, total length: 420 mm, total height: 390 mm, air demand: 1.5 m³/h, overall weight: 17 kg, pressure: 10 bar, warranty duration: 12 months, We offer the Schimmel Mini-S dry ice blasting machine. Blasting media: Dry ice pellets: 1.5mm - 2.2mm Dry ice hopper capacity: 3.5 kg Dry ice consumption: 6-25 kg/h Inlet air pressure: max. 10 bar Inlet air volume: 500 - 1500 l/min Power supply: pneumatic (compressed air only) Pressure regulation: Yes Air volume regulation: Yes Delivery time: 3-4 weeks Warranty: 1 year Shipping: Not included in the price Gsdjzxq T Njpfx Afusbu

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Gbedpfx Afoy Hkd Hjusu Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Gjdezimg Hepfx Afuebu Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Godpfx Aszvgiuefujbu Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 4,540 mm, total length: 6,800 mm, All-terrain forklift Manitou M 70-2 Drive Diesel Year built 2025 Gsdsztgiiepfx Afujbu Lifting height (mm) 4,540 Lifting weight (kg) 7,000

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Gbedpfx Ajzvn Hzsfusu Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: used, Year of construction: 2013, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees Gedpfozv Tb Rsx Afuebu - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: good (used), Dry sorting line with 22 pockets. Gedpezuk T Ujfx Afuobu

Condition: new, functionality: fully functional, mileage: 850 km, power: 132 kW (179.47 HP), first registration: 01/2026, overall weight: 7,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 265/70r19,5, wheelbase: 3,480 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, machine/vehicle number: 24-0137, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, winter tires, NEW VEHICLE with initial registration on 01/05/2026! Optional availability of extended winter service and municipal equipment! Engine-mounted auxiliary drive including hydraulic pump! *EXTENSION OF WARRANTY to 5 years from initial registration is optional! In addition to the extensive standard equipment, the following options are installed: SEATING Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically sprung, heated Bench seat for passenger with multi-functional storage and stowage compartment Gjdpezt Ncfjfx Afujbu Seat heating ELECTRICAL/LIGHTING Expansion module + CAN Open Preparation for telematics system (telematics box) Additional speed limiter CAB EXTERIOR Rear wall of the cab with window, recommended for open bodies to observe rearward traffic Additional vehicle key with remote control Protective grille on the front of the cab Mirror for body width 2350 mm Preparation for snow plow mounting plate Heated windshield CAB INTERIOR/AUDIO Roof storage above the windshield HI-Connect radio with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple Car Play and Android Auto Tablet and smartphone holder with USB charging port Cruise control CHASSIS Trailer coupling, automatic trailer hitch CHASSIS Adjustment of exhaust pipe for fording Spare wheel, dimension corresponds to chassis tire size ENGINE/TRANSMISSION/AXLES Rear axle ratio i = 5.857 Handbrake control for remote start COLOR Deep orange IC 177 RAL 2011 IVECO BODY - CCM Meiller three-sided tipper 3.00 x 2.20 x 0.35 [m] including lashing eyes and access ladder Meiller long material carrier with cab protection on the front panel for Daily with three-sided tipper Mounting of Meiller tipper Engine-mounted auxiliary drive including hydraulic pump Purchase / financing / lease purchase / leasing / rental possible. Subject to errors and prior sale! Pictures may include optional extras at an additional cost! Delivery date by arrangement! Viewings only by appointment! Address is the office address only, not the vehicle location!

Condition: new, functionality: fully functional, machine/vehicle number: 24-0137, mileage: 850 km, power: 132 kW (179.47 HP), first registration: 01/2026, fuel type: diesel, overall weight: 7,000 kg, tire size: 265/70r19,5, axle configuration: 4x4, wheelbase: 3,480 mm, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, truck registration, winter tires, NEW VEHICLE with initial registration on 01/05/2026! Optional available: expansion for winter service and municipal equipment! Engine-mounted auxiliary drive including hydraulic pump! Godpfxszt Ndco Afujbu *WARRANTY EXTENSION to 5 years from initial registration is optionally possible! In addition to the extensive standard equipment, the following options are installed: SEATING Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated Bench seat for passenger with multi-functional storage and stowage compartment Seat heating ELECTRICAL SYSTEM/LIGHTING Expansion module + CAN Open Preparation for telematics system (telematics box) Additional speed limiter CAB EXTERIOR Rear wall of cab with window, recommended for open bodies to observe rearward traffic Additional vehicle key with remote control Mirror for body width 2350 mm Preparation for snowplow mounting plate Heated windshield CAB INTERIOR/AUDIO Roof storage above windshield HI-Connect radio with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple CarPlay and Android Auto Tablet and smartphone holder with USB charging port Cruise control CHASSIS Automatic trailer coupling CHASSIS Adjustment of exhaust pipe for fording Spare wheel, dimension corresponds to chassis tire size ENGINE/TRANSMISSION/AXLES Rear axle ratio i = 5.857 Handbrake control for remote start COLOR Deep orange IC 177 RAL 2011 IVECO BODY - CCM Meiller three-sided tipper 3.00 x 2.20 x 0.35 [m] including lashing points and access ladder Meiller long material carrier with cab protection on the front wall for Daily with three-sided tipper Mounting of Meiller tipper Engine-mounted auxiliary drive including hydraulic pump Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may include optional extras that incur additional costs! Delivery date by arrangement! Viewing only by appointment! Address is only the office address, not the vehicle location!

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle Gbsdjzyvp Sjpfx Afueu - Telma retarder - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan Gbsdpfszy Hrqsx Afuju • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.