Used Passavant Kfp 1500/60 for sale (25,956)

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm Iodpfx Asxcuxqon Iebc punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Year of construction: 2024, condition: new, weight max. in kg 300 kg Ibsdpsxcywrjfx An Ijc dimensions 1200 x 900 x 1300 mm weight 125 kg For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Approved for a maximum of 2 people, approved by the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,660 mm, fork length: 1,200 mm, total length: 3,880 mm, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 Ibodpsxd Et Ijfx An Ijc - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: new, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,120 mm, fork length: 1,200 mm, total length: 3,650 mm, - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 Iodpoxd E T Isfx An Isbc - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 Ibedjxd Hfljpfx An Iec - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: good (used), functionality: fully functional, load capacity: 1,500 kg, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes handheld remote control Iedpfx Asxxv Rtsn Iebc - maximum load 15,000 N - 1,500 kg - rotation speed 0.07 - 1.3 rpm - rotation torque 1,000 Nm - hydraulic tilting up to 135° - tilting moment 3,000 N - max welding current 700 A - table diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - connection 3 x 400 V / CEE 16A - weight 730 kg We have several of these tables available

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm Ibodpoxab Umsfx An Ijc - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: good (used), Haas-Laser HL 1203D Optical system: 22-31-21-BX Laser class 4 1500 W 1064 nm You can find more new and used items in our shop! International shipping costs available upon request! Ibjdpfexam Rysx An Iec

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Ibodoxbh D Depfx An Isc Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min Ijdpfxox H Tvfj An Ijbc total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Ibedpfx Ansxwmiko Isc Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Final price – price for pick-up * Retarder * French inspection certificate available. * Currently fitted with 58 seats (no reclining seats) --> therefore, seats can be added * Additional row of seats included, resulting in 60 seats * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air tank with drain replaced * Oil separator replaced * Cost: EUR 8,500 / net * In July 2026: Air conditioning service * Side matrix (without control unit) * Interior route display * Seats adjustable in reverse * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary Ibodpfx Aexwr Apen Iec * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Ibedpfxoym Ih Uo An Isc

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine. Ibsdpexugqvjfx An Ioc

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 30,917 h, load capacity: 6,000 kg, lifting height: 4,650 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, gearing type: hydrostat, overall weight: 10,000 kg, empty load weight: 10,000 kg, color: red, Equipment: air conditioning, cabin, clamp, fork extension, gripper hydraulics, head guard, lighting, pallet forks, retractable fork, sideshift, MGC.pl presents a LINDE H 60 D EVO forklift from 2018. A robust internal combustion forklift designed for demanding transport and handling tasks. With a nominal load capacity of 6,000 kg, an enclosed operator cabin, and a set of three forks, this model is perfectly suited for industrial plants, logistics centers, building material warehouses, and handling heavy loads. TECHNICAL DATA: • Brand and model: LINDE H 60 D EVO • Year of manufacture: 2018 • Diesel engine • Engine power: 104 hp • Hour meter reading: 30,950 hours Isdexu Ii Topfx An Ijbc • Nominal load capacity: 6,000 kg • Maximum lifting height: 4.65 m • Hydrostatic drive – smooth operation and precise maneuvering • Enclosed operator cabin • Wide fork set – triple forks DESIGNED FOR HEAVY-DUTY WORK The hydrostatic drive enables smooth starting, efficient changes in driving direction, and precise maneuvering to the load. This is particularly useful when loading trucks and working in confined spaces. The enclosed cabin protects the operator from wind and rain, increasing comfort during outdoor work. The set of three forks provides additional support for appropriately selected, wide loads. The load capacity for a specific load, lifting height, and attached equipment must be selected according to the forklift's load chart. CONDITION AND HISTORY: • First owner • Complete service documentation • Service book • Regularly serviced • Accident-free • Original paint • Ready for work – operation in accordance with the required approvals The stated price is the net price and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price. _____ After price negotiations, we can record a detailed video or perform a computer test or paint thickness measurement for a decisive customer, allowing them to purchase the equipment remotely with confidence. _____ Of course, we highly encourage you to come and inspect the equipment. However, if that is not possible, this form of purchase will be available, guaranteeing a secure transaction.

Condition: good (used), Year of construction: 2010, MASA 2250l/1.5m3 planetary mixer, year of manufacture 2010 Ibjdpfexl R Slsx An Ijc

Condition: used, System: Used chamber filter press Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Iodpfxowqyf Io An Ijbc Purchase or rent: Inspection of the systems by arrangement at our facility.

Year of construction: 2025, condition: new, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-1800kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 60L/min; power supply: 220V; power consumption: 5.5kW. Ibjdpjv Nnkwjfx An Ioc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-2500kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 60L/min; power supply: 220V; power consumption: 7.5kW. Ibedpfx Anev Nnk Ds Ioc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 10,636 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 10,636 h, driver cabin: other, fuel: electricity, The Linde P 60 Z tow tractor is a powerful three-wheeled electric vehicle designed for efficient towing tasks in industrial environments. First registered on 23 November 2015, this used vehicle has accumulated 10,636 operating hours or kilometers to date. Its striking red design and robust technical specifications make this model stand out. Ibjdpfxowu Ig Ue An Isc The tractor features a single seat, making it ideal for individual tasks in the logistics and transport sector. Its electric drive ensures environmentally friendly and cost-effective operation. The permissible total weight is 1,330 kg, allowing for solid transport operations. An inspection can be carried out without prior appointment. Further information and contact details can be found on the specified website. Sale to businesses only (agriculture, freelancers, small and large enterprises) or export. Errors and prior sale excepted.

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg Ibodpeu Nw Enofx An Ioc OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. * Ibjdpfx Aou Nzwusn Ijc

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm Isdpfou N D Rdjx An Ijbc plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: good (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, 3D perforated table 2000 x 1000 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, table top flat machined, very solid weight approx. 750 kg The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility Ibedpfx Aevlx Hbon Isc System 28 Max. length U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price includes table top with feet, but without 3D accessory clamping devices.

Condition: new, Year of construction: 2025, Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 2.6kW; compressed air: 0,2m³, 6bar; machine dimensions: L3000xW950xH1600mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Ibjdpfx Anov Nkyuj Ijc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.