Used Pasteuriser Cheese Vat 350 Liters for sale (16,220)

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Weight: approx. 900 kg Iodpoy Hkc Asfx Ab Noat For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A Iedpfxjy Hkbls Ab Neat - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Iajdpfxsy Hkazo Ab Not Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), mileage: 337 km, power: 125 kW (169.95 HP), first registration: 11/2024, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 6,150 mm, total width: 2,050 mm, total height: 2,720 mm, loading space length: 3,350 mm, loading space width: 1,750 mm, loading space height: 1,960 mm, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Further options and accessories = - Heated mirrors - Halogen headlamp - None - Manual - Radio/Cassette - Reversing camera - Lane departure warning system - Fabric - Blind spot sensor - Partition wall = Notes = Configuration: 4x2, Payload: 1,382 kg, Curb weight: 2,118 kg, Gross weight: 3,500 kg, Trailer load, unbraked: 750 kg, Trailer load center axle, braked: 1,700 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking aid: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, Color: white, Heated mirrors, Reversing camera, Lighting type: halogen lamp, Lane departure warning system, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 125 kW (168 Hp), Fuel: Diesel, Euro: 6, Drive type: timing belt, Transmission: automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Sidewall covered, Roof rack: none, Side doors: 1, Rear closure: double door, Central locking, Seating capacity: 3, Seating configuration: 1+2, Seat cover: fabric, Seat adjustment: manual, AC automatic EURO6 CarPlay, Spare wheel, Tire type: summer tires Iaedpeyt Dliefx Ab Not = Further information = General information Number of doors: 1 Registration number: V-78-KNV Axle configuration Tire size: 235/65R16 Brakes: disc brakes Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: coil spring Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: leaf spring Weights Unladen weight: 2,118 kg Payload: 1,382 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 58 cm Maintenance APK (Technical Inspection): valid until 11.2027 Condition Technical condition: very good Optical condition: very good Damages: none Number of keys: 2 Financial information Leasing rate: €505 per month (van, 72 months); Please ask for further information and terms

Condition: excellent (used), functionality: fully functional, mileage: 117,840 km, power: 210.35 kW (286.00 HP), first registration: 03/2022, fuel type: diesel, empty load weight: 2,500 kg, tire size: 21 Zoll, next inspection (TÜV): 05/2027, fuel: diesel, energy efficiency: B, CO₂ emissions: 223 g/km, fuel tank capacity: 90 l, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 6.8 l/100km, fuel consumption (combined): 7.9 l/100km, color: black, gearing type: automatic, number of gears: 9, emission class: euro6, suspension: air, number of seats: 7, total length: 5,243 mm, total width: 2,030 mm, total height: 1,928 mm, Year of construction: 2022, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, car registration, central locking, compressor, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, seat heater, start-stop system, tire pressure monitoring, traction control, Mercedes-Benz GLS 350 d 4MATIC AMG Line (Model Year 2022) Luxury SUV in Excellent Condition – Full Service History & Extensive Equipment Vehicle Condition & Highlights: - Warranty & Inspection: Comprehensive Mercedes-Benz warranty valid until 16/03/2027 and new inspection (TÜV) until May 2027. - History: Absolutely accident-free. Complete service history, exclusively maintained at authorized Mercedes-Benz dealerships. - Condition: Very well-maintained, genuine long-distance vehicle from a reputable previous owner. - Mileage: Currently 117,840 km (vehicle is still in use, mileage may vary minimally). - VAT: Value-added tax is deductible – ideal for commercial buyers (€75,900 gross / approx. €63,781.51 net). Equipment Highlights: - Design & Chassis: AMG Line exterior & interior, 21-inch AMG alloy wheels, AMG Line sports steering wheel, upgraded front brake system (factory option), air suspension (AIRMATIC) for superior ride comfort. - Acoustics & Sound: Burmester® surround sound system combined with factory-fitted sporty engine sound (individual option for dynamic acoustics). - Comfort & Interior: 7-seater configuration, large panoramic sunroof, ambient lighting, and the exclusive trim package. Ijdpfx Asy H Ruljb Neat - Rear Seats & Comfort: Rear Comfort Package Plus (enhanced comfort in the second row), heated seats for the front seats and entire second row. Sales and Payment Terms: - Price/Payment: €75,900 negotiable (VB). Transaction and handover to be conducted strictly in person on site. - Accepted Payment Methods: Full cash payment upon collection or immediate SEPA bank transfer on site. - Security: Professional and transparent transaction. Unreliable enquiries, unreasonable offers or attempted fraud will not be answered and are blocked. Viewing and test drives are available at any time by prior appointment. I look forward to your enquiry. Legal Notice for Private Sale: The sale is made under exclusion of any warranty for material defects. Liability for damages due to injury to life, limb, or health, and for grossly negligent and/or deliberate breaches of duty on my part as the seller remain unaffected. As this is a private sale, returns and exchanges are excluded. The existing Mercedes-Benz warranty valid until 16/03/2027 is unaffected and will be transferred to the buyer.

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation Iajdpfxeyilnzj Ab Not - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: SN376848, functionality: fully functional, 12 months warranty, available for immediate delivery Electrically heated circulating air chamber furnace Nabertherm NA 500/45 - Max temperature: 450 °C - Internal dimensions (W x D x H): 750 x 1000 x 750 mm - External dimensions (W x D x H): 1400 x 1910 x 1810 mm - Volume: 500 liters - Nabertherm Controller P300 (9 programs with 40 segments each) - Feedthrough, e.g. for thermocouples - Alarm indicator light - Pneumatic lifting door - Power: 18 kW Iaodsya D Auspfx Ab Nst - Weight: 800 kg - Documentation, CE declaration - Electrically tested and provided with a current DGUV test protocol - 1 extra tray available from stock on request! Inspection at our warehouse possible at any time! All devices are electrically tested and supplied with warranty. Furnace, furnaces, industrial furnace, curing oven, heat cabinet, heating oven, laboratory oven, drying oven, tempering oven, chamber furnace, kiln, hardening furnace, hardening ovens, annealing furnace, annealing ovens, tempering furnace.

Condition: good (used), Year of construction: 1961, groove width 50 mm drawing length 350 mm Iajdpfxey H Nz Rj Ab Not weight of the machine ca. 2,5 t Good condition, many accessories!

Condition: used, A used Hanagata Heat Shrink Tunnel - compact size Iaodpoyz Uzxofx Ab Not

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm Isdsy Hmfyepfx Ab Neat This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: like new (used), Year of construction: 2017, FIMAL Horizontal Panel Saw concept 350 Motor power: 7 kW Input voltage: 400 V Input frequency: 50 Hz Iaodpfx Abjy Nklve Net Max. cutting height: 105 mm Max. cutting width: 1,300 mm Saw blade diameter: 350 mm Max. speed: 4,000 rpm Overall length: 4,300 mm Total weight: 1,360 kg Max. cutting length: 3,200 mm Swivel range: 45° Motorized width stop with 4 synchronized aluminum stops Screen control with 8" touchscreen Compressed air requirement: 6 bar Sliding table size: 1,000 x 400 mm (extension table) Outrigger table size: 3,200 mm with 2 digital limit stops Extraction connection: 1 x 100 mm, 1 x 120 mm Feed speed: 0 - 40 m/min Special equipment: Programmable saw blade height adjustment Miter fence +/-50° Additional support table 800 x 200 mm Year of manufacture: 2017 From training facility Price: 18,000.-

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Options: Chip conveyor High-pressure pump ISO programming Tooling Iajdpfx Abey Ew Hle Net

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Technical Machine Benefits • Max. Turning diameter: Ø 420 mm Iodpfx Abox D I Ris Njat • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. Iaodpfxov Nrfxo Ab Njt - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: used, Year of construction: 1997, CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location : Iodpfxoy Ddwbo Ab Neat Use: Cheese Cooking, Stretching and Moulding

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: Iajdpfew Ixw Aex Ab Net • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WF0AXXTTRAPP51370, mileage: 9,900 km, first registration: 09/2024, fuel type: diesel, fuel: diesel, color: white, Year of construction: 2024, Equipment: ABS, airbag, car registration, tail-lift, traction control, FORD TRANSIT 350 L4 with aluminium flatbed – hydraulic tail lift Ijdpox Rhpbofx Ab Njat

Year of construction: 2026, condition: new, Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs. Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22" - Backlight : upgrade to vertical light Specifications: Wheel spindle taper: HSK50E, max diameter diamond wheel: 50 - 350 mm, max wheel width: 70 mm, wheel speed: 100 – 1000 RPM (infinitely variable), wheel radius: 0 – R30 mm, dressing wheel (SiC) 180x25x32 mm, dressing wheel speed 200 – 2000 RPM, dressing wheel oscillating stroke 0‐70 mm, dressing wheel motor power 0,75 KW, weight approx. 1520 kg, dimensions w x d x h 1340 x 1300 x 1900 cm, connected load (380V – 50 Hz), colour red / RAL 9003 signal white. Iedsd S Tbnopfx Ab Njat

Condition: good (used), functionality: fully functional, Velox 350 crosscut saw with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kW, 380 Volt Iaedpfst Ta Urox Ab Njt 2 speeds Double mitre cuts possible Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine Iedpfex Hi I Dox Ab Njat -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: Isdjy Ih Rgepfx Ab Noat The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2004, functionality: limited functionality, type of input current: AC, spindle speed (max.): 60,000 rpm, We are selling an engraving machine with custom design and components from Fanuc. Iedpfx Absyxp A Ss Neat

Year of construction: 2010, condition: good (used), Food Tools 5AFCE Cheese cutter Iaedoy Ayb Tspfx Ab Nst Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Condition: new, Year of construction: 2026, power: 3 kW (4.08 HP), cutting height (max.): 350 mm, cutting width (max.): 480 mm, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 350 Fully Automatic Straight Cutting Band Saw Machine CRONOSS 350 is a fully automatic straight cutting band saw machine developed for serial and repetitive cutting operations. Thanks to its material feeding system and automatic stop control, it reduces operator dependency and increases production continuity. It provides reliable and stable performance in medium and high-volume metal cutting applications. Standard Features - Chip cleaning brush - Speed controller (inverter) - Hydraulic vice - Hydro-mechanical band tensioning system - 50 cm support rod - Stop system - Automatic material feeding system - Band breakage detection and stop system - 1 piece 120 cm + 1 piece 60 cm roller table - LED lighting system Technical Specifications – CRONOSS 350 Capacity 90° - Round: 350 mm Ijdpjynt Hxsfx Ab Nsat - Square: 350 x 350 mm - Rectangle: 350 x 480 mm Motor & Technical Details - Main Motor: 3 kW - Hydraulic Motor: 0.37 kW - Coolant Motor: 0.09 kW - Band Saw Blade Size: 41 x 1.3 x 4680 mm - Material Feeding Height: 771 mm - Vice Max. Opening: 480 mm - Vice Max. Closing: 0 mm - Table Width: 766 mm - Dimensions (HxWxL): 1005 x 2521 x 2170 mm - Weight: 1350 kg Production & Supply CRONOSS 350 is manufactured in Turkey. Different automation and capacity options can be offered on request. For detailed technical information and a price quote, please contact us. Automatic Band Saw Machine Fully Automatic Band Saw Straight Cutting Band Saw Industrial Band Saw Metal Cutting Machine Steel Cutting Band Saw Hydraulic Band Saw Production Band Saw 350 mm Band Saw Automatic Steel Cutting Machine Workshop Cutting Machine Structural Steel Cutting Machine

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame Iaedpfjw Smdfex Ab Nst * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg