Used Pee-Wee P24Us for sale (1,027)

Condition: good (used), Kliklok Concorde K170 cartoner in nice condition. Has come from major UK food factory so has been very well maintained. Several change parts may be available with this machine. Ledpfsnmv N Sjx Aa Rorr

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Lrjdonmv Raepfx Aa Ror

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) Ledonygvropfx Aa Rsrr 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Year of construction: 1981, condition: used, pressure 20 t stroke 8-38 mm no. of strokes 100-1800 Hub/min table surface area 400x400 mm table pass 380x80 mm table height 1000 mm Lrjdpfx Aaolp U Nme Ror weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 1600x1600x3100mm m

Year of construction: 2026, condition: new, functionality: fully functional, working width: 400 mm, drive type: Direktgetriebe, funnel diameter: 400 mm, nominal power: 7.5 kW (10.20 HP), number of blades: 33, rotational speed (max.): 150 rpm, rotor diameter: 300 mm, rotor width: 400 mm, sieve perforation: 6 mm, Direct driven staggered rotor Special knife design makes adjustment unnecessary Lrsdpfxen Hqxfj Aa Rsr Easy access for maintenance and cleaning Gegqxgljx Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 400 Rotor speed (rpm) 150 Drive capacity (kW) 7.5 Rotor knives (pcs) 33 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 550

Condition: used, mileage: 232,000 km, power: 176 kW (239.29 HP), first registration: 02/2008, overall weight: 15,500 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, loading space volume: 6 m³, total width: 2,550 mm, total height: 3,290 mm, Equipment: ABS, air conditioning, * 1st hand * Registration as a self-propelled work machine, no sticker required * Faun Viajet 6R body with separate engine "Mercedes Benz" * 11000 BS * Suspension: leaf-air * Tires: front 30-40%, rear 50% * 8-speed manual transmission + working gear * Rear view camera * Additional hydraulic connection at the front Lsdpen Ht Idjfx Aa Rsrr * Errors, typos and prior sale reserved * Viewing by appointment * We take care of all customs formalities

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame Lrsdpoh Alh Hefx Aa Rjr 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: as good as new (ex-display), For sale Creepspeed motor used/reconditioned for a Demag P hoist NB! Lrjdpfx Aajh Uqdps Rjr we have more than 15,000 Demag parts in stock see our website or other ads

Condition: as good as new (ex-display), For sale Creepspeed motor used/reconditioned for a Demag P hoist Lodpfeh Uqfisx Aa Rsrr NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as Lodszlqkbspfx Aa Rorr BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Lredpfx Aaswnn S Re Ror Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: ready for operation (used), operating hours: 4,028 h, functionality: fully functional, machine/vehicle number: WB843-2, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,990 kg, next inspection (TÜV): 11/2026, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1650 sweepers, first owner Engine inspection including oil, oil filter, and fuel filter will be carried out free of charge upon sale Machine version with a new pedal system 1,960 sweeping operating hours 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf suction hose (rare) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cabin with air-sprung driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Lredezmzk Uspfx Aa Rer Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawn mowers (not included) Errors, changes and prior sale reserved. We only sell under our general terms and conditions and with the exclusion of all warranties. Errors, changes and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale reserved!

Condition: used, Year of construction: 2013, operating hours: 16,885 h, functionality: fully functional, mileage: 127,833 km, power: 118 kW (160.44 HP), first registration: 06/2013, overall weight: 11,150 kg, fuel type: diesel, color: orange, axle configuration: 4x2, empty load weight: 6,350 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, suspension: steel, loading space volume: 5 m³, Equipment: ABS, additional headlights, air conditioning, low noise, Self-propelled street cleaning machine: + Ravo + Type 580 + First registration: 10.06.2013 + FPT 4-cylinder diesel engine, 160 HP, 3920 cc + 127,835 km; 16,885 total operating hours; 9,687 sweeping hours + Euro 5 + Hydrostatic drive – max speed 50 km/h + 2-brush system + Fresh water tank + Debris container hydraulically tiltable to the rear + Central lubrication system + Rear-view, side-view, and brush cameras + Amber beacon + Radio/CD + Air conditioning + 450 cm x 190 cm x 270 cm (LxWxH) + Empty weight: 6,350 kg; gross weight permitted: 11,150 kg + Municipal vehicle from first owner Get all newly listed vehicles sent by email – subscribe to our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale! Lrodjyk Hh Uepfx Aa Ror

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 Lrsdpfx Aszpfy Sea Rer -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, mileage: 69,200 km, power: 75 kW (101.97 HP), overall weight: 4,900 kg, sweeping width: 2,100 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nSweeping width: 2,100 mm\n\nMileage: 69,200 km\n\nMACHINE DETAILS\n\nPermissible total weight: 4,900 kg\n\nTotal power requirement: 75 kW Lredpfx Ajyv Atfsa Ror

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper Condition: Ready for use and fully functional Technical condition: normal Lodpszmbi Rsfx Aa Rerr Front tire size: 3.00-4 Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible for us at any time. We also gladly buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Working width: 750 mm; Effective sweeping width: 1100 mm

Condition: new, Solid feed for commercial needs Reinforced machine cast stand parts. With frequency converter and digital speed display Technical data: Number of feed rollers 4 Lrodevrv Ivjpfx Aa Rer Dimensions of the feed rollers 120x60 mm Speed ??continuously 2-22 m/min Motor output power S1 400W / 400V Weight approx. 70 kg

Condition: excellent (used), operating hours: 1,600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), first registration: 07/2023, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, 4-cylinder Perkins diesel engine 404J E22TA, 97/68/EC emission stage 5 With 75 hp / 55 kW at 2,800 rpm Cruise control for transport and work mode Permanent hydrostatic all-wheel drive with 2 gear stages (Sweeping mode: 0-19 km/h, driving mode: 0-40 km/h) – 65 liter diesel tank VEHICLE COMPLETELY DISPENSES WITH AD BLUE AND STILL HAS THE LATEST EMISSION TECHNOLOGY STAGE V In addition, the installed engine has camshafts, therefore, a costly timing belt repair, approximately every 70,000 km or 1000/1500 operating hours, is eliminated! Furthermore, please note: · Service interval list with long inspection intervals only every 500 operating hours - Comfort cabin with center seat (1-man cabin) incl. heating - Driver's seat = ISRI health seat with integrated 3-point safety belt Belt guide on the right, stepless backrest tilt adjustment, lumbar support, seat heating switch, armrest, seat contact switch, adjustable headrest, automatic adjustment of the seat to the driver's body weight (see also attached certificate) - Air conditioning with ventilation and defrosting system - Radio with Bluetooth hands-free system, USB port, MP3 player - All-season tires 255/65 R 16 incl. fender extensions, M+S - Heated wide-angle side mirrors - Joystick control with 4.3" screen - Sweeping kilometer counter and sweeping hour counter - Reading light - LED work spotlight at the front of the cabin - Suction pipe - Fresh water tanks 200 l incl. filling connection Storz C coupling - External starting device - LED rotating beacon - Warning triangle, vest, first aid kit - Safety warning flashing light for external use - Integrated reversing camera incl. 7-inch color screen - infrared night lighting, Viewing angle approx. 135°, and additionally suction nozzle camera, incl. LED suction nozzle spotlight additionally, switchable - Standard paint RAL 9016 white - Water high-pressure system 160 bar - 11 l/min, incl. 8 m hose and hand lance (already installed) - HD lance with 90° swivel head for comfort cleaning (already installed) - Central lubrication strip block Sweeping material container with 1.5 m³ gross, 1 m³ net according to DIN EN15429-1 container volume - Discharging height sweeping material container 1,660 mm - with cleaning flaps and circulating water level indicator - Container made of high-quality, rust-resistant aluminum 200 liters of recycled water and 200 liters of fresh water Straight steel pipe as central suction Lrodpfxjzdz R Ao Aa Rer Suitable for sweeper, scrub deck and for mowing Multi-purpose separating screen for efficient dirt separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Deflector plate with rubber coating (wear protection) Hydraulic quick-change coupling (Faster coupling), single-lever operation Rear underrun protection Shovel and broom holder Sweeping unit with hydraulic tilt adjustment of the right broom Hydraulic pressure regulation / relief for front sweeper broom, adjustable on the control armrest Sweeping width: 1,190mm to 2,400mm Quick-change suction nozzle Hydraulic coarse dirt flap Mixed bristle pattern Stepless broom speed adjustment 0-150 rpm Dust reduction through 2 spray nozzles per roller brush Automatic collision protection Changes, typing errors, errors and prior sale are subject to change. All information is provided without guarantee. The sale is made without any guarantee or warranty.

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Length mm 2225 Width mm 1015 Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Front sweeper (summer) with 3 side brushes from 2015 Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Lsdpjzf Ezbjfx Aa Rorr Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ Lodpszmmrqsfx Aa Rorr SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER

Condition: used, mileage: 174,600 km, power: 130 kW (176.75 HP), first registration: 03/2012, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 6,200 kg, empty load weight: 8,800 kg, tire size: 10 R 22,5, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, at the depot. Features: 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, 8-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, underbody protection, side aluminum fender, sweeping brush, roof hatch, green environmental badge. Superstructure: Bucher sweeper type CityFant 6000 with sweeping brush on the right, approx. 6 m³ & JohnDeere auxiliary engine 4045 TF 63 kW, right-hand drive. Vehicle operating hours: 19277 h, sweeper operating hours: 11366 h! Sweeper superstructure: Bucher CityFant 6000 FB Twin Engine Auxiliary engine type: JohnDeere 4045 TF exhaust turbocharger 63 kW Rear tailgate in stainless steel, brush plate 700mm, roller 400mm, suction hose at the rear 200mm, manual water valves in the driver's cab, road construction design with reinforced suction hoses, LED flashing and warning lights. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lsdpfx Aszdvfbsa Rorr

Condition: excellent (used), functionality: fully functional, Raute 2HV57-66 Veneer Peeling Lathe with log centering unit, veneer outfeed and veneer clipping shears. Technical condition: Very good, after a complete overhaul. Technical specifications: - Maximum log diameter: 100 cm, 70 cm with centering unit Lsdpfx Aozphghea Rjrr - Maximum peeling length: 1,450 mm

Condition: new, maximum load weight: 32,123 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Schmitz SCS 24/L Speed Curtain * Load securing: Body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket design for 2 wheels * Wheelbase 7,700 mm Lodjupb Sdspfx Aa Rjrr * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor * Fire galvanized chassis * Tarpaulin color RAL 9010 pure white For further information please do not hesitate to contact us

Condition: used, Year of construction: 2020, mileage: 63,176 km, power: 62 kW (84.30 HP), first registration: 03/2020, overall weight: 3,500 kg, fuel type: diesel, color: yellow, next inspection (TÜV): 08/2028, gearing type: automatic, emission class: euro6, loading space volume: 2 m³, number of seats: 2, Equipment: air conditioning, Internal vehicle number: G266 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: - Chassis: Johnston Truck C 202 - Operating hours of engine: 6078 h - Mileage: 63,176 km - First registration: 03/04/2020 - Fuel: Diesel - Power: 62 kW - Displacement: 2,970 cc - Gross vehicle weight: 3,500 kg - Driver's side: right Johnston C202 The flagship among sweepers. The Bucher and former Johnston sweeper range offers both articulated sweepers and all-wheel drive sweepers. Thus, we can find the right sweeping technology for every application. Sweeping work in parking garages, on sidewalks, in narrow alleys, in industrial areas, and many more. Depending on the version, the machines have a payload of up to 0 kg, but are also available with a permissible total weight of 3.49 tons, making them suitable for use as sidewalk sweepers. The compact sweepers are characterized by high driving comfort and high suction power and are truly exceptional. Financing example: * Internal number: G266 * Purchase price: 32,900.00 EUR Ledpfx Ajwibpfoa Rorr * Down payment: 10% * Term: 60 months * Monthly rate: 544.93 EUR * Residual value: 4,980.00 EUR If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: like new (used), Year of construction: 2024, Outfeed System 5.6m long belt 270mm wide. Min length 400mm Max Length 5000mm Sweeper 500mm push. New control System New Belt New Gearbox for sweeper Lsdeyfnbfopfx Aa Rerr Sweeper movement by motor/gearbox