Used Peter Peter Winterthur Brücke for sale (520)

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,183 h, load capacity: 7,000 kg, lifting height: 3,400 mm, fuel type: gas, mast type: simplex, construction height: 2,650 mm, fork carriage width: 1,600 mm, fork length: 2,400 mm, empty load weight: 10,150 kg, total length: 3,000 mm, drive type: Treibgas, construction width: 1,480 mm, Compact forklift - Internal combustion engine Load center: 600 Fork width: 150 mm Fork thickness: 65 mm Mast type: Standard Transmission: Hydrostatic Condition: Ready for operation and fully functional Dsdpfxsz Evp Tj Akmowc Technical condition: very good Front tire type: Superelastic Front tire size: 355/65-15 Rear tire type: Solid/cushion Rear tire size: 645/250-410 Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used forklifts, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this KSL70G. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also offer consignment sales for your vehicles. Side shifter, fork positioner, Heater, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 18,542 h, load capacity: 10,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, construction height: 3,470 mm, fork carriage width: 2,500 mm, fork length: 1,600 mm, empty load weight: 18,160 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 1200 Fork width: 350 mm Fork thickness: 80 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 11.00-20 Rear tire type: Pneumatic Rear tire size: 11.00-20 Dwsdjz Ev Ayopfx Akmec Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG100-12. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shift, fork positioner Fork positioner adjustment range: 705 / 2400 mm Heater, full cabin, air conditioning, Camera

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,565 h, load capacity: 2,000 kg, lifting height: 6,950 mm, free lift: 2,530 mm, fuel type: electric, mast type: triplex, construction height: 3,002 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,899 kg, total length: 2,050 mm, drive type: Elektro, construction width: 1,008 mm, Electric 3-Wheel Forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire size: 15x4.5-8 Battery voltage: 48V Battery Ah: 750Ah Battery year of manufacture: 2013 Description: In addition to this Hyster model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this J2.0XNT. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Sideshift, Dwodpfowctw Usx Akmoc Full free lift,

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB Dodpfx Ajwga Hwokmowc - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 6,156 h, load capacity: 5,000 kg, lifting height: 6,100 mm, fuel type: gas, mast type: simplex, construction height: 4,150 mm, fork carriage width: 1,500 mm, fork length: 1,460 mm, empty load weight: 8,460 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,400 mm, LPG Forklift Load center of gravity: 600 Fork width: 150 mm Dwedpfswbavhsx Akmjc Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 7.00-15 Description: In addition to this Hyster model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this H5.00XM. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Sideshift, fork positioner, Heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 7,809 h, load capacity: 5,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,910 mm, fork carriage width: 1,490 mm, fork length: 1,400 mm, empty load weight: 8,450 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Dodpfxev U Eyas Akmswc Rear tires size: 3.00-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GX50/14/40. P.S.: Our forklift workshop specializes in repairs, overhauls, and custom builds for forklifts weighing 8 tons and over. We're happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1060 mm

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 15,779 h, load capacity: 7,000 kg, lifting height: 5,040 mm, free lift: 1,440 mm, fuel type: diesel, mast type: duplex, construction height: 3,370 mm, fork carriage width: 1,360 mm, fork length: 1,400 mm, empty load weight: 10,850 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,250 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Dwedpfxev U Eyys Akmsc Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic Rear tires size: 355/65-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ70/14/50V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, full free lift, Platform height: 1,140 mm

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 10,194 h, load capacity: 7,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, fork carriage width: 1,450 mm, empty load weight: 9,840 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Dwsdpfx Ajwacbdskmec Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this J/SH70/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1030 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,874 h, load capacity: 5,000 kg, lifting height: 7,510 mm, free lift: 2,500 mm, fuel type: electric, mast type: triplex, construction height: 3,480 mm, fork carriage width: 1,560 mm, fork length: 1,400 mm, empty load weight: 12,170 kg, total length: 5,000 mm, drive type: Elektro, construction width: 2,220 mm, Electric sideloader Load centre: 700 Fork width: 200 mm Dwedpfx Akowqtfzemoc Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 32x12.1-15 Rear tyres type: Pneumatic Rear tyres size: 32x12.1-15 Battery voltage: 120V Battery capacity: 750Ah Battery year: 2019 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing at favourable terms are always possible with us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice about this EGX50/14/75TR. P.S.: Our master forklift workshop specialises in repair, servicing, reconditioning and special builds for forklifts from 8 t onwards. We are also happy to offer your vehicle for consignment sale. Heating, full cab, full free lift, Platform height: 1030 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 15,421 h, load capacity: 7,000 kg, lifting height: 5,630 mm, free lift: 1,830 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,540 mm, fork length: 1,400 mm, empty load weight: 11,800 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,280 mm, Sideload forklift Load centre: 700 Fork width: 150 mm Fork thickness: 60 mm Dwjdpfx Aswx Sy Hjkmec Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tyre type: Pneumatic Front tyre size: 355/65-15 Rear tyre type: Pneumatic Rear tyre size: 355/65-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase & financing on favourable terms are always possible with us. We are also happy to buy your used vehicle outright, even if you do not purchase one from us. Our owner, Mr Peter Sawitzki, will be happy to advise you in detail about this GX70/14/57TR. P.S.: Our master workshop specialises in repairs, maintenance, overhauls and custom-built solutions for forklifts from 8 tonnes upwards. We are also happy to sell your vehicle on commission. Heater, full cab, full free lift, Platform height: 1,030 mm

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 5,975 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 680 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 1,520 mm, fork length: 1,250 mm, empty load weight: 9,800 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,050 mm, Side loader Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 3.00-15 Dedpfxjwx Sy Ts Akmewc Rear tire type: Superelastic Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 other heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Hire purchase and financing under attractive conditions are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GX60/12/45. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to display your vehicle for commission sale at our facility. Heating, full cabin, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,780 h, load capacity: 5,000 kg, lifting height: 6,280 mm, free lift: 2,080 mm, fuel type: electric, mast type: triplex, construction height: 3,050 mm, fork carriage width: 1,540 mm, fork length: 1,400 mm, empty load weight: 12,170 kg, total length: 4,960 mm, drive type: Elektro, construction width: 2,240 mm, Electric sideloader Load centre: 700 mm Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 3.00-15 Rear tyres type: Pneumatic Rear tyres size: 3.00-15 Djdpfx Ajw H Eckjkmswc Battery voltage: 120V Battery capacity: 750Ah Battery year of manufacture: 2025 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment directly, even without you buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you comprehensive advice on this EGX50/14/63TR. P.S.: Our expert forklift workshop specialises in repair, maintenance, refurbishment and custom builds for forklifts from 8 tonnes upwards. We can also display your vehicle for consignment sale at our premises. Heater, full cab, full free lift, Platform height: 1,020 mm

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Dwjdpfx Akjun I N Hjmoc Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets 714KWe, thermal 1058KW, cooling 689KW

Condition: used, Concrete sample press for concrete and material testing Dedpexb Nv Usfx Akmowc Flexural strength test Determination of compressive strength

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 10,120 h, load capacity: 1,000 kg, lifting height: 4,560 mm, free lift: 1,530 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, fork carriage width: 800 mm, fork length: 1,160 mm, empty load weight: 2,640 kg, total length: 1,610 mm, drive type: Elektro, construction width: 1,130 mm, Reach truck Load centre: 600 mm Dwjdpfxewttr Hs Akmoc Fork width: 120 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 48V Battery capacity: 465Ah Battery year: 2020 Description: In addition to this Jungheinrich model, we have approximately 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing at attractive conditions are always possible. We are also happy to purchase your used equipment directly – even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice regarding this ETV110. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle on consignment sale through us. Side shifter, Full free lift,

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced Dwsdpfx Akezcv Egemsc - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: CG017, Cutting width: 815 mm Mounting console, bolting: 352 mm Gearbox incl. hydraulic motors Djdpfsyk Sfxsx Akmjwc Transverse cutting heads incl. round chisel RM8 Hydraulic connection lines consisting of: Supply/return: approx. 2 m (S25) Leak oil: approx. 2 m (L18) Operating pressure: max. 320 bar Flow rate: max. 250 l/min Application area: rock up to max. 70 MPa Incl. mounting plate for construction machinery technology Suitable for carrier device Liebherr R914

Year of construction: 2025, condition: new, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of various materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width available). Easy operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W • 1064nm, 20-400 kHz (for perfect annealing engravings) • Scanning unit "New Generation ECO" • 19" PC control, no external card needed! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Complete enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III Software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP IP connectivity for external components • Industry 4.0: via the TCP/IP protocol, the status can be processed at any time. • Inputs and outputs for direct communication • New look and feel with a fresh design • Even clearer and more intuitive operation • 3D preview for processing on rotary axes • Performance increase of up to 50% thanks to 64-bit technology • Improved stability thanks to integrated control card • Optionally up to 4 axis controls (integrated) • Optional deep engraving with Z-axis • More efficient algorithms for fast hatching. • Completely newly designed galvo generation • 2x laser pointer for checking the focus position. • LED illumination of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating manual and software in German • Protective enclosure according to laser class 1 • Includes 4 hours of training at our training center (max. 2 people) Do you need customization? Gladly. Choose from our numerous accessories: Dedpfxjd S H Nxj Akmswc =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading =ᐳ Conveyor belts for infeed and output =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slides =ᐳ Interlock system for marking WITHOUT a protective enclosure, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual wishes in terms of design and size! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, marking laser. MarkingHero.

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions Dsdpfofdr Thsx Akmswc =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! Dwsdpfx Asfz D Ezjkmec - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, Year of construction: 2025, shaft length: 1,064 mm, laser power: 20 W, door opening width: 480 mm, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Dwjdpfef E Ifbox Akmoc Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Dwodjzty D Hopfx Akmsc Arc sensor / Tactile sensor Automatic torch cleaning 2-station operation Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 13,135 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 650 mm, fuel type: diesel, mast type: simplex, construction height: 3,160 mm, fork carriage width: 1,545 mm, fork length: 1,800 mm, empty load weight: 11,050 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,600 mm, Sideloader Load center of gravity: 900 Fork width: 160 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Dedowmtl Hspfx Akmswc Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DFQ50/18/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,010 h, load capacity: 5,000 kg, lifting height: 5,440 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,194 kg, total length: 2,900 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift truck Load centre: 500 mm Dwedpfexn U Icox Akmoc Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tire size: 355/45-15 non-marking Rear tires type: Superelastic Rear tire size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a truck from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this RX60-50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment and custom construction of forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Sideshift, Full free lift,

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Dsdozukkgepfx Akmswc Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.