Used Pinacho Sc 200-42-1000 for sale (32,964)

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 Gjdpfx Aljclnkxexsub -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm Guedogr E R Uepfx Alxeb -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS Gsdofmqz Djpfx Alxeub -Manufacturer: APC Smart-UPS SC 420 -Voltage: 220-240 V/50/60 Hz/2.3 A -Accessories: VA bracket -Dimensions: 375/130/H175 mm -Weight: 9.1 kg

Condition: new, machine/vehicle number: 6d88bda3a1ee2464a81b34f36, empty load weight: 4 kg, maximum load weight: 13 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction, with slight pretensioning in the middle, turntable with strong ball bearing slewing ring, wheel chocks with holder, quarter-shell mudguards in front of and behind each axle Low loader lashing eyes over front axle: 2 pairs of ring lashing eyes, 5 tons each at the front on offset Lowbed: 4 pairs of lashing eyes on the side of the low bed, 6 tons each 5 pairs of lashing eyes per 5 tons between the side members Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (drawbar length 1 700 - 2 300 mm) Axles + suspension Gsdpfx Aoi Ri N Aolxeub BPW drum brake axles, each with an axle load of 10 tons, axle adjuster. Axle endurance brake test to 105 km/h, rear axle can be removed manually. By releasing the air lock and lowering the rear to the ground. Then disconnect the connecting hoses from the rear section, insert the transport bar into one of the rear sockets and unhook the rear by gently pushing it down at the rear and pulling it back at the same time (parking brake released). After loading or unloading, drive up to the rear section and hook it in up to the mark. Then lift the rear section up to driving height and attach the connecting hoses. Confirm the pin lock. (Visually check whether the bolt engages) and check the rear function. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable clutch heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, rotating beacon with holder, switched via parking light (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (only for electrics, not for ABS/EBS) Floor Steel/ checker plate floor on offset, between longitudinal and cross member with perforated plate cover. Axle cover cannot be driven over, widening to 3000 or 3300 mm possible. Operating instructions Please note! A special permit is required for axle loads of 10,000 kg. The permit must be applied for individually in each federal state; the legislator does not have to give an approval for 20 tons GG. Customer risk. Special approval required if the overall length of the train exceeds 18 750 mm. Observe country-specific approval regulations. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Observe the BO circle!!! Approval / plates Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), prepared for single-line license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL bla

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS Guodpfxjyap Nas Alxsb X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed Gujderfudropfx Alxeb - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, 1 brand-new hydraulic swing-cut guillotine shear (unused exhibition machine) Make: LAMI NOVA / Model: SC 2006 max. cutting length 2100 mm max. sheet thickness, for mild steel 6.5 mm max. sheet thickness, for VA 4 mm Cutting angle 1.5° throat 350 mm Cuts 29 / min. Drive power 7.5 kW Dimensions L x W x H approx. 2670 x 2000 x 1600 mm Weight 4500 kg Accessories / Special features: - NC control ELGO P 40 as electronic positioning display for the motorized backgauge, length = approx. 800 mm, ball screws - 1 heavy angle fence with tilting cams, 1000 mm - 2 heavy-duty support arms - Large projection of 350 mm for cutting off longer metal sheets - Central cutting gap adjustment - Cutting line lighting - Flat fixed cutting angle of 1.5° - Ball rollers in the table - Upper blade with 2 and lower blade with 4 cutting edges - Plastic feet for the hold-down device - Electric foot switch - Sheet metal chute at the rear - Oil filling - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electric SIEMENS, TELEMECANIQUE - Operating instructions - CE-compliant Delivery time: immediately, subject to prior sale plus pre-freight costs China - Germany Gedped Ad A Esfx Alxeub Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2001, operating hours: 89,240 h, clamping force: 1,000 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 420C-1000-350 (174) sold without conveyor belt Product Code: 174 Availability: In Stock Year of production: 2001 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,000 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420x420 mm Platen size: 570x570 mm Mould height min.: 250 mm Gjdpfx Asvt Rzajlxjub Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 89.240 h Weight: 3430 kg Dimensions: 4,4x1,7 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR Guodswf Dh Nopfx Alxeb This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Guedpfxexdi Ezs Alxob Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: good (used), geared motor, electric motor -Speed: 121 rpm -Power: 0.75 kW Gsdpfxsb A Ia Do Alxjub -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 30 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm Gjdpfx Aexm Sagslxoub -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: ready for operation (used), Phytron WSS 107-200-24-60 stepper motor E64801 24V~ 60Hz insulation class F, used, good condition, 100% functional, delivery as shown in photos Gujdpewx U Nwefx Alxjb

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gjdpji Eaa Rjfx Alxsub

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Gedomz Ecwjpfx Alxjub

Condition: ready for operation (used), Parvex LC310THR0004 servomotor SN: 8340 with Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79 encoder SN: 16078305, used, in good condition, 100% functional, delivery as shown in the photos. Gedpfxextwa Ee Alxeub

Condition: new, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Gsdpei D Un Hjfx Alxoub

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO , Rexroth 1MS200E-4B-A1/S010 Motor + 1MR200E-A066 Rotor + SINS-085HW Cylinder from EMAG VSC 200 Dou,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gsdpfol Nqydsx Alxsub

Condition: ready for operation (used), Bosch SE-B2.040.060-00.003 brushless servo motor with Heidenhain ROD 426.014 1000 . 222 651 23 ROD encoder, hole spacing of the mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm, used, good condition, 100% functional Guodpfxsi D Hd Ds Alxeb

Condition: ready for operation (used), Phytron WSS 107-200-24-50 stepper motor E54777 24V~ 50Hz, insulation class F, used, good condition, 100% functional, delivery as shown in photos. Guodpfx Ajwx U Nqslxeb

Condition: new, SKF 7026 ACD/P4ADGA Precision angular contact ball bearing Bore 130 mm Outer diameter 200 mm Width 34 mm < unused > in OVP 100 % functional Gusdpfxexahzmj Alxjb

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + MS200E-4B-A1/S010 motor + S9124453 brake + SINS-085HW cylinder,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gujdel Nqyaepfx Alxeb

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. Gsdpfotltvzsx Alxjub For further questions, please feel free to contact me at any time.

Condition: good (used), Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears Gusdjfgi Nmepfx Alxjb -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

Condition: used, Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing Gsdpfxjv D U Uxe Alxsub -Lever shears: Sheet metal shears cutting length 200 mm -Holder: continuously adjustable -Number: 2x lever scissors available -Price: per piece -Dimensions: 580/120/H480 mm -Weight: 49 kg/piece