Used Plate Mounter And Proofer for sale (18,172)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 111500 € 2107.35 € 3100 mm 20 mm 20 mm 16 mm 16 mm 12 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 6000 mm 2200 mm 1900 mm 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity Gusdpfx Aqeynm Ebsgsh the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 27800 € 530.98 € 3030 mm 4 mm 4 mm 2 mm 180 mm 4 kW 4600 mm 1120 mm 1020 mm Guedpfxjynm Ezj Aqgoh 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 35400 € 676.14 € 3030 mm 6 mm 6 mm 4 mm 220 mm 5.5 kW 4750 mm 1200 mm 1150 mm 4920 kg Godpoynm E Usfx Aqgjuh 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 98600 € 1863.54 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm 18.5 kW 5310 mm 1660 mm Guodpfx Aeynm Hfoqgoh 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 11800 € 226.56 € 1050 mm 5 mm 130 mm 3,5 m/min 2.2 kW 2200 mm Gedpfx Aqeynngtogouh 750 mm 1000 mm 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, Scope of delivery includes: 01x Base plate, second choice Material finish: galvanized Suitable for manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Total depth: approx. 140 mm Hole spacing (edge): approx. 38 mm Number of holes (plate): 03 pcs. Hole diameter (plate): approx. 13 mm Weight | per pc.: approx. 0.22 kg / pc. Your contacts in our company: Gjdpfeyrr Tfox Aqgsuh Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. If transport or shipment of this item is required, additional costs will apply. These costs depend on the delivery location and the scope of delivery and can be provided upon request.

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 600 mm weight 2265 kg GERD WOLFF clamping cube 1500 x 1500 x 600 mm Also available in 800 mm version (H1154). If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 13 Edge distance: 120 Weight: 2265 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Gujdpfxsymf Nis Aqgjh Mounting cube, Fixing cube, Clamping block

Condition: new, plate width 1500 mm plate depth 1000 mm plate height 600 mm weight 2200 kg GERD WOLFF clamping cube 1500 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 2200 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Gjdeymf S Rjpfx Aqgsuh Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 83800 € 1583.82 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure Godpfxoypbp Dj Aqgeuh variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu Guedpfxoypbqhs Aqgjh ca. 12 - 14 Wochen ab Auf Türkei 95000 € 1795.5 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V Gedpfxsyp E Sio Aqgjuh

Year of construction: 1999, condition: good (used), functionality: fully functional, Plate turner, maximum dimensions 3200 x 1000 mm. Functional between two through-feed drilling machines. Gujdpfx Aqeza U Ibogjh Has not been used extensively.

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm Guedoznnd Rspfx Aqgsh height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring machine. Size is 2750 x 1400 x 340 mm.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop Gjdeznngxepfx Aqgsuh * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm Gjdpfxjv E Edmo Aqgjuh -Table height: 875 mm -Plate thickness: 30 mm -Flatness: see photos (straightening sheath not included) -Transport dimensions: 4000/2200/H875 mm -Weight: 2222 kg

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts Gjdpfx Aqoxaa Rgegjuh - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm no. of strokes 34 Hub/min cutting angle 1.3 Grad Gujdpfexabc Rex Aqgoh distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit Godpoxabd Ujfx Aqgsuh - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation Guedpfexabiksx Aqgoh * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Gujdpfjxabkbsx Aqgeh Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: Guedjxabllopfx Aqgoh - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: Gjdpfsxabwujx Aqgsuh - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Guedpfx Aoxab E Ejqgjh - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 Gjdjd Ezfmspfx Aqgouh The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, The plates are cleaned befor delivered. (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, total height: 765 mm, overall weight: 850 kg, total width: 1,000 mm, total length: 1,500 mm, Measuring and marking plate Cast iron Precision surface plate Manufacturer: FUJITA Type:JIS B 7513 Gsdpfowr Umpjx Aqgsuh Surface size: Length:1500mm Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.