Used Prod-Masz Zgr3000/1,2 for sale (1,744)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance Lodpfx Ajguk Dkogtohk - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Lhsdjfdkbhjpfx Agtjk Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs Lhodpfxed Atips Agtjk - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance. Lhsdpfxsd Atgho Agtek

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. Ledpfx Agsy R I Tmstshk New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Serial number: 60046 Voltage: 400 V Current: 15/8.5 A Power: 4.0 kW Frequency: 50/60 Hz Lhsdpfx Asy Apdwjgtok Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. If you have any questions or require more information, please do not hesitate to send us a message.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 Ljdpfx Agezuxxretjhk - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A Lodpfx Ajzgck Negtshk - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm Lodpfx Aowwl I Iogtshk min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Lsdpjzva Tmefx Agtjhk Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: refurbished (used), Product number 1225 Machine dimensions: 760 x 980 x 1320 mm (width x depth x height) Sieve diameter: 130 mm Weight: approx. 470 kg Power: 16 kW Power supply: 400 V 50Hz 5N Filling system: Auger Protection rating: IP 69 Capacity: 12 tons/8h Housing made entirely of stainless steel. Gearbox and motor overhauled. Device after major servicing, ready for operation. Lhsdpfx Agszvrgljtek

Condition: used, Three second-hand swivelling clamping shoes from Schafberger + Sprödhuber (S+S) for frame presses used in professional woodworking. They are used to align and securely clamp workpieces when assembling frames and structures. Technical data: - Dovetail width: ~ 58 mm Lhedjztniwjpfx Agtek

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 36316, Carousel packaging and filling machine with three filling nozzles, designed for automated filling and sealing of cups. Lhjdpfozua Nrjx Agtek The machine ensures a complete process: - automatic cup feeding - filling using 3 filling nozzles - placing and heat-sealing of the lid film - automatic lid placement - discharge of the finished, sealed product The machine is equipped with a product transfer device with a CLAMP/DN32 connection. Suitable for food production and other operations using cup filling.

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Quantity available: 12 Manufacturer: BBH Products GmbH Model: SMX10HI Ljdpfxjzr T Ezo Agtjhk Type: Safety controller (compact design) Supply voltage: 24 V DC Function: Safety monitoring of axes, safety doors, emergency stop Interfaces: safe inputs, relay outputs Approval: EN ISO 13849-1, SIL 3, PL e

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air demand: 7.08 m³/h, year of last overhaul: 2025, air pressure: 87 bar, film width: 360 mm, product height (max.): 430 mm, product height (min.): 110 mm, product length (max.): 600 mm, product length (min.): 300 mm, The SAVOYE INTELIS packing machine is a fully automatic packaging line designed for packing products in corrugated cardboard boxes. The unit was manufactured in France in 2016 and features a modular plug & play architecture, enabling quick assembly, disassembly and adaptation of the process to current logistics requirements. This machine is suitable for medium to large distribution centers, e-commerce operations, contract logistics providers, and manufacturing plants. Its capacity is up to 840 cartons/hour, with a maximum single package weight of up to 32 kg. The packaging line consists of the following components (as per documentation): INTELIS F12 – Carton erector – automatic forming of boxes from corrugated board. INTELIS T18 – Shrink tunnel – carton and film stabilization through thermal shrinkage. INTELIS C12 – Carton closer – lid application and final closing of the carton. NORDSON PROBLUE – Glue application system – professional glue applicator for packaging. Key features: Lsdpfx Asx Uphgogtehk - Fully automated packing cycle. - Forming, shrinking, closing, and preparing parcels for shipment. - Stable and energy-efficient transport system – conveyors with integrated roller drives. - Intelligent speed and load adjustment. - ECO mode with regenerative braking energy recovery. Technical specifications: PLC: TSXP572634M Throughput: 840 cartons/hour Carton dimensions: • min. 300 × 200 × 110 mm • max. 600 × 400 × 430 mm Max. package weight: 32 kg Power: 5 kVA Power supply: 3-phase 400 V

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Lhodpfx Agsi Akrketek Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. Lodpfezhux Iex Agtehk We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, For sale: SCS 30-08A screw compressor. In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. Lodpjzhux Usfx Agtehk The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: used, Schafberger+Sprödhuber Type BS electro-pneumatic pot-hinge drilling machine or fitting drilling machine for drilling pot hinges or fittings with mechanical centring. Technical data: Lhedpfxszrytxj Agtok - Technical specifications: On request

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1113, total width: 1,170 mm, total height: 1,510 mm, total length: 1,850 mm, briquette diameter: 60 mm, overall weight: 770 kg, Never used = New machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price is stated without cooling system) - Sufficiently large hopper ensures long machine runtime without the need for frequent material refilling Technical data: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Ledpfx Ageyh Nfhotohk Hydraulic unit: 7 pressing cycles/min SIEMENS LCD programmable touch control panel Manual or fully automatic operation possible – SIEMENS PLC control Dual pressure gauge for improved pressure monitoring Briquetted material level probe Oil level probe Preheating unit for operation in low temperature environments Inspection window Can be connected to other machines in a production line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm Lsdpewyddysfx Agtohk ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Condition: used, Type Production Line Radiator production line Lhodpjzpbl Dsfx Agtsk Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), functionality: fully functional, Spomasz 800L paddle mixer with feed hopper for 200L mixing containers. Sold on behalf of a customer; functional machine, sold without warranty and without the possibility of return. Lhedpozmp N Ssfx Agtsk

Condition: used, Available quantity: 6 units Functionality tested; item originates from the dismantling of equipment at an automotive supplier Manufacturer: BBH Products GmbH Model: SMX31 Type: Safety module for machine control Supply voltage: 24 V DC Function: Monitoring of emergency stop buttons, door interlocks, and light curtains Approval: EN ISO 13849-1, SIL 3, PL e Interfaces: safe inputs and outputs Ledpfx Aozmm I Ssgtjhk

Condition: new, Label printers and carton sealing machines LogComp / Bedo Lhodpfx Aey H Ex Sjgtjk