Used Profifeed Technologies Profistop Omicron (Basic Software) for sale (26,631)

Year of construction: 2022, condition: like new (used), Agilent Model: G9800A For sale is an Agilent Cary Eclipse Fluorescence Spectrophotometer – unused in original packaging (without software). As far as is known, the item was never used and is in like-new condition. The original packaging is available and may show slight storage marks. Year of manufacture: 11/2022 Agilent Technologies Cary Eclipse Fluorescence Spectrophotometer Description: The Cary Eclipse G9800A is a high-quality fluorescence spectrophotometer for research, laboratory, and industrial use. It offers exceptional sensitivity, speed, and ease of use and is ideally suited for applications in the fields of biochemistry, pharmacy, environmental analysis, and materials research. Technical data: Light source: Xenon flash lamp Wavelength range: 200–900 nm Measurement modes: Emission and excitation spectra Time-resolved fluorescence Phosphorescence Excitation-emission matrix (3D scan) Software: Cary Eclipse Software (not included) Detector: Highly sensitive photomultiplier (PMT) Guodpfswp Embox Alxjb Scan speed: Very fast (up to 80 nm/s) Typical applications: Analysis of proteins, DNA, enzymes Detection of environmental contaminants such as PAHs Fluorescent dyes & markers Development of pharmaceutical agents Manufacturer: Agilent Technologies (formerly Varian) Model: G9800A – Cary Eclipse Fluorescence Spectrophotometer Includes: Device, power cable, manual Power supply / connection data: Power connection: IEC C14 socket (classic cold appliance plug, as used in PCs) → Connection via standard cold appliance cable Mains voltage: 100–240 V AC, 50/60 Hz (automatic switching) Power consumption: Approx. 150–200 W (depending on operating mode) Fuse: Internally installed, typically T2A or T3.15A Weight: approx. 28–32 kg Scope of delivery: (See picture) (Changes and errors in the technical data reserved!) For further questions, we are happy to answer by phone.

Year of construction: 2017, condition: excellent (used), Plant description Steel base plates as the basis of the plant and for positioning the lifting systems and shakers Gusdpfxjifkhaj Alxjb Electric or electro-hydraulic lifting system for vehicle positioning 2 High Power Shakers with electromagnetic fixation and docking system up to 3,5 tons Control cabinet with shaker control PC system for control and evaluation With component test bench!!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Gjdexwpvgspfx Alxeub Furthermore, a variety of materials is available for the machine.

Condition: used, machine/vehicle number: MPK5000, functionality: unexamined, Used Neon invitrigen Transfection System with Pipette holder. Manufacturer: Life Technologies Model: MPK5000 Gusdpfoxp I Thex Alxob Voltage: 100-240V (50/60Hz)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Model: AXi940b Gusdpfxowgm Eae Alxjb Lamp Operating Hours:

Year of construction: 2017, condition: like new (used), Mobile fluid bed dryer on a trailer skit. included clothfilter. dryer survice is 5M2 Guedpfx Aohflwgjlxjb

Year of construction: 2023, condition: like new (used), functionality: fully functional, Small Parts Counter Caterpillar U-60 (5-25 mm) The Caterpillar U-60 small parts counter is a semi-automatic counting system designed to automatically achieve a target count. The system is ideally suited for stations requiring rapid part changes and for small to medium batch quantities. Input voltage: EU: 230 V AC, 50 Hz Electrical connection: single-phase Power: 120 W Weight: 70 kg Dimensions (H x W x L): 794 x 284 x 770 mm Functional description: One-time setup for a specific part Select recipe (part, number of bags, quantity per bag) Manually insert parts into the belt intake opening The system stops automatically once the target count is reached. Key Features: 99.9% accuracy Parts size range: 5 mm–25 mm Quick setup: approx. 60 seconds Single initial setup per part Object versatility: one system can count a wide range of item types Quick changeover between items Machine stops counting upon reaching the preset quantity User-friendly interface Count data is stored and can be easily retrieved. Gujdpfx Asx Ex D Eslxjb

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix Guodpfx Aljtximvoxob ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: refurbished (used), Available rubber testing equipment 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC! Gusdpfx Alowmnlhjxob

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 Guodpfxeu Hl R Tj Alxsb DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, machine/vehicle number: MY51260317, functionality: fully functional, Agilent Technologies CXA Signal Analyzer 9 kHz - 3 GHz incl. documentation and accessories Gsdpfxoxr D Awj Alxoub

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400 Gsdpfxsud H Dme Alxoub  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77 Gusdpfx Ajud N Hdelxob  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: Guedpfx Asuggb Delxeb The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven Guedpfsw U N Ixox Alxsb - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2006, functionality: fully functional, MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Small machine optimized for small workstations, laboratories or production lines. For the inspection of vials, ampoules and other components for particulate particles. Suitable for integration in GMP-controlled environment; the stainless construction and enclosed hood facilitate cleanliness and inspection tasks. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Gusdpfx Aoxzuitolxob - Enclosed hood with viewing window and adjustable lighting system - Stainless-steel construction, robust and easy to clean - Controls on front panel: power switch, lighting selector, intensity dial - Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION - Voltage: 115 V AC (standard US mains) - Phase: single phase (1 PH) - Current: 5 A - Frequency: 60 Hz

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Guedpfewy Uu Aex Alxjb • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: K-89404748-10327777, type of input current: three-phase, total width: 2,134 mm, total length: 4,268 mm, total height: 2,750 mm, input voltage: 460 V, input frequency: 60 Hz, 3 phase, 460v (5) Washing valves, (1) Fill head Capacity: 30-90 kegs/hr (15.5gll clean and fill time: 2 mins) Compatible keg sizes: 7L to 58L (239mm to 425mm D x 320mm to 610mm H) Also compatible with disposable Petainer kegs Guedjv Ncmyopfx Alxeb Filling Accuracy +/- 0.19% Integrated exterior and interior washing, racking, filling, control, and exit conveyor w/ slide Requires de-install in Michigan, USA. Contact us for details!

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of ultra-high-pressure thermoplastic hose lines. Guodpfx Aoy Sbmcslxob A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Guedjxhfpkepfx Alxeb Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Guedpfx Aoy R U Abelxsb Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 4 Basic Condition: New machine Spindle speed (infinitely variable): Range A 120 - 2.500 rpm range B 60 - 1.250 rpm normal drilling capacity: 40 mm standard equipped with: - stepless drill feed - thread cutting device - infinitely variable speed control - handle cross switch - digital display for speed, feed Gedpfx Aloci Su Dexsub and drilling depth - chip breaking function - operating instructions with the following options: - Free cutting device

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit Godpexnbf Uofx Alxsub - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Condition: used, dimensions ca. 1030 x 1090 mm Gujdjvpr Tiopfx Alxsb

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min Godpfsy Nnnnjx Alxsub - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”