Used Rademaker B.v. Dosing/Filling Line for sale (19,262)

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Gbjdpswu Aa Nsfx Almjl Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Gbsdpfxex A Tbwo Almol

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Gbsdpfxjwuzzrj Almjl Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Gbjdpfx Aewuzzfolmjl Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Godpfxoihf Ufo Almebl Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Godjlwtzyepfx Almjbl Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Godporn Sqhefx Almobl Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls Gsdpfx Asihf Tpslmjbl

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Gjdpfxoixqg Ns Almsbl Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Godpfxoihf Tws Almsbl Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Gjdpfxswu Agcs Almebl Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: K-89404748-10327777, type of input current: three-phase, total width: 2,134 mm, total length: 4,268 mm, total height: 2,750 mm, input voltage: 460 V, input frequency: 60 Hz, 3 phase, 460v (5) Washing valves, (1) Fill head Capacity: 30-90 kegs/hr (15.5gll clean and fill time: 2 mins) Gsdpfjv Ncmyox Almjbl Compatible keg sizes: 7L to 58L (239mm to 425mm D x 320mm to 610mm H) Also compatible with disposable Petainer kegs Filling Accuracy +/- 0.19% Integrated exterior and interior washing, racking, filling, control, and exit conveyor w/ slide Requires de-install in Michigan, USA. Contact us for details!

Condition: used, Year of construction: 1980, sheet width 1000 mm Gbjdpfxswz Rvxo Almel plate thickness 125 mm

Condition: used, Year of construction: 2000, Used Rondo line. Gbodex Swucepfx Almsl We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Manufacturer: Kemper Model: Multimatic Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Rondo ZGP665.C (year 2000), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. Gbedpsx R Ugmofx Almsl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Godoy Rflyepfx Almobl Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Gbodpfxoy R Tk Rj Almsl Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Gbsdpfx Aowak Aislmsl Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Year of construction: 2022, condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. (2022). Country of Origin: United Kingdom Gbjdpfxoy Rzfvj Almol Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Offers considered prior to auction

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m 2 - Rack trolleys for racks 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m Gjdpfoy Rv Edex Almsbl 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector Godpfxsx Ari Hs Almobl 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine Gjdpfxoyid Nwj Almobl VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Gbjdpfxoyighij Almel

Condition: used, Year of construction: 2018, Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional line components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer, both rated at 60,000 cans/hour. The line also includes modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from line covers the core process from can handling and filling through seaming, inspection, pasteurization, packaging and conveying. Several machines have been modernized or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging and auxiliary equipment.   Technical Data Capacity: approx. 60,000 cans per hour Container type: Standard cans 500ml & 330ml Condition: used line, very good condition, well maintained Application: Beer, Carbonated soft drinks   Scope of Delivery Can Depalletizer | Krones | Pressant | Automatic can depalletizing system | 2018 Empty Can Inspection | Krones | Cantronic 709 | 2018 Can Rinser | Hein | Can rinsing system | 1978 Can Filling Machine | KHS | Innofill EMD 108S | Can filling machine for beer and carbonated soft drinks | 1997 Can Seaming Machine | Ferrum | F812 | Can seaming machine | 1997 Cap / Lid Feeding System | CSW |Lid feeding system for can seamer | year tbd Fill Height Inspection | Krones | Checkmat 731 | 2023 Tunnel Pasteurizer | KHS | Innopas | Tunnel pasteurization system | 2001 Can Dryer | Gesete | BasicLine | 2018 Fill Height Inspection | Krones | Checkmat 707 | Fill height inspection system | 2018 Tray and Shrink Packing Machine | Kisters+ZEVA | 197/60+ST/II-600V ; completely overhauled in 2015 | 1992 Grouping Station | Krones | Robobox T-GS | Product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | Automatic palletizing system | 2018 Pallet Stretcher / Wrapper | Strema | A5000BII | 2021 Pallet Labelling Machine | Logopak | 850 P3 T02 P06 | 2022 Pallet Conveyors | Krones | Pallet transport system | 2018 Tray Conveyors | Krones | Tray transport conveyors | 2018 Can Conveyors | Krones | Can conveyor system | 2002 Additional Information The tray and shrink packing machine was originally manufactured in 1992 and completely overhauled in 2015. The line combines proven core filling technology with several newer Krones handling and inspection components. Offered used, as-is, without guarantee. Gjdsy Rxtqspfx Almebl

Condition: good (used), Year of construction: 2017, For sale / on request: - Kaak Driem line 1 - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Gbsdjy Rkrrspfx Almel Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.