Used Raus Rs3/1000 for sale (11,062)

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Laodpfx Amozddlwemjc 6 stator knives Drive 90 kW With equipment

Condition: excellent (used), functionality: fully functional, chuck outer diameter: 1,000 mm, 4-jaw chuck of the French manufacturer AMESTRA, in very good technical and visual condition, diameter 1.000 mm, mounting taper A15. Ledpexcumhjfx Ammoac

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D solutionline, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Manufacturer: DMG MORI Pfronten Model: DMC 85 monoBLOCK RS3 Year of manufacture: 2014 Control system: Siemens 840D solutionline Shopmill Approx. 22,500 program hours Main spindle Interface: SK40 DIN 69871 Speed: 20-14,000 /min Spindle replaced by DMG MORI approximately one year ago Tool changer Type: Double gripper with three-phase motor Magazine: 60 positions X: 935 mm Y: 850 mm Z: 650 mm A: +/- 120° C: 360,000 * 0.001, continuous Lasdpfx Aozamn Tjmmjc 5-axis simultaneous machining: YES Automation: DMG MORI RS3 Number of pallets in the system: 3 Additional pallets: 2 Equipment 3D measuring probe Operating mode 4 Extraction system IKZ 40 bar with belt filter system Chip conveyor Coolant gun Hydraulic clamping system Media feedthrough through the pallet WITHOUT the clamping devices and tool holders shown in the images!

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine xH: 8,3 x 2,0 x 1,90 m Ledpfx Aozdkz Demmeac

Condition: used, INFICON Control Panel Module 1000, 200005389 Control panel for INFICON vacuum and leak detection systems. Equipped with a display, function keys, and start, zero, and stop/vent controls. Manufacturer: INFICON Type: Control Panel Model: Module 1000 Item Number: 200005389 Serial Number: 001087 Device Type: Control Unit Display: Integrated display Laedpfxszdai So Ammoc Controls: Start, Zero, Stop/Vent Connection: 25-pin D-Sub connector Country of Manufacture: Germany Condition: Used

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Laodpfx Amezcnm Aemoc Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Ledet Hwuvspfx Ammjac Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm number of wheels 1 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Laodpfxjt Hw H So Ammjc

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Laodpfed I A Dhox Ammoc Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 Laodpfx Amexapftomjc - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 540 mm, roller diameter: 940 mm, overall weight: 1,100 kg, Equipment: CE marking, For sale: Heavy professional band saw machine, brand ACM, type BS 940 RS3”. Resaw / resawing machine. Also equipped with a feed system. The feed works well, and 6 new saw blades of 90 mm width and 1 of 60 mm width are included. Specifications: • Wheel diameter: 940 mm • Maximum cutting height: 540 mm • Motor power: 11 kW Ledpfxjzcamzj Ammeac • Weight: approx. 1,100 kg • Suitable for heavy saw blades (6580–6670 x 90 x 0.9 mm) Condition: In good working order, has been stored for a period. Viewing possible. We are selling the machine as it is no longer in use. Collection by arrangement. Machine is set up and available for viewing. Price excl. VAT!!

Year of construction: 2025, condition: like new (used), functionality: fully functional, total length: 400 mm, total width: 1,000 mm, total height: 600 mm, machine/vehicle number: 2025, Wall cabinet HS 1000 with sliding door Top used unit, cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH Lajdpfx Aey Ac T Sjmmjc with intermediate shelf

Condition: used, Year of construction: 1983, operating hours: 6,270 h, power: 70 kW (95.17 HP), Equipment: all wheel drive, cabin, front linkage, * Manual transmission * Front and rear hydraulics & PTO shafts * Front and rear lift arms * Cab with 2 seats * Drawbar coupling * First registration: 17/08/1983 * Operating hours: 6,270 h ----* Front tire size: 520/75R26 * Rear tire size: 520/75R26 * Technical total weight: 7,000 kg * Curb weight: 4,280 kg * Overall length: 4,480 mm ----Vehicle number: 12039----Subject to errors and prior sale----We are happy to assist you with all formalities involved in purchasing a vehicle. Lajdpfx Aoy Rdgpommjc Simply let us know your requirements and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * TÜV/roadworthiness inspection * Complete export processing * Financing arrangement * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm Laodpoxbtrtofx Ammec weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm Laedpfx Aod Ih Ncjmmoc draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: reconditioned (used), Year of construction: 1996, machine/vehicle number: 6672311, BM5141 Polar Mohr stacking lift L-1000-W-6 => reconditioned for ergonomic working at user-friendly working height Technical data Tub size 1000 x 1450 mm Lift max. 850 mm Load capacity max. 1.000 kg A sensor controlled lifting of the material enables the operator to handle the material at an ergonomically favourable working height, placing it into an automatic jogger or directly into the cutting machine. The stacking lift can also be used for de-stacking the the cut-material. The material is lowered semi-automatically. This means that the process is started manually and stopped automatically. POLAR stacking lift need not be anchored to the floor and is therefore flexible in its deployment. Customer benefits: - The productivity of the cutting machine is increased by up to 10%, as the working height during loading/unloading remains constant - Lifting of heavy loads is minimised - The operator's performance curve remains constant Lsdpfetgupcjx Ammjac - Occupational illnesses are significantly reduced

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Lsdpfezcmccox Ammeac Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: used, mileage: 20,301 km, power: 114 kW (155.00 HP), first registration: 01/1997, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, Equipment: crane, MAN 8-163 with roofing crane Böcker AK 27/1000 4x2 Self-propelled work machine Mobile Crane DA53 Suspension: leaf-leaf Wheelbase: 3.70 m Lasdpfey A Afbjx Ammsc Böcker crane Type: AK 27/1000 5x extensions 4x hydraulic outriggers 1x remote control + emergency control 1x work basket and accessories We are also happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Subject to error and prior sale.

Condition: used, Year of construction: 2024, operating hours: 26 h, machine/vehicle number: SN064871, Options: - RFID chips LiServ 4.0 Lasdpszdcxcjfx Ammoc - Energy measurement package Balluf Smartlight ME 5000 - Barcode scanner

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module Lodpfx Amjxvrwdjmoac -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Lasdpfx Aozcdyxsmmsc Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish Lodpfx Ajy Iakfemmeac

Condition: ready for operation (used), Year of construction: 2022, Excellent condition – from 2022-2023 (we have a total of 10 units). Inspection welcome. Lodozb Rf Sopfx Ammeac

Condition: used, mileage: 189,560 km, power: 110 kW (149.56 HP), first registration: 06/2001, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro3, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,370 mm, Equipment: soot filter, tail-lift, Body: * Bodywork/Body: 6.10m dry freight box * Kögel body construction * Internal dimensions: 6,100mm x 2,450mm x 2,370mm * MBB tail lift, 1,000kg capacity * Right-hand side door * 3 rows of anchor rails * Roof air deflector Equipment: * Driver’s air-sprung seat * Storage box * Roof hatch * Analog tachograph * Diesel particulate filter Other Information: * First registered in Germany * 2 previous owners * Suspension: leaf/leaf * Engine: 4.2 Litre – 110 kW diesel * Payload: 2,210 kg according to registration certificate Lsdpfx Aoy A Apgemmoac * Permissible gross weight: 7.49 t * Well-maintained condition with original mileage Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual quote! Trade-ins of your commercial vehicle or construction machinery are welcome. If you require a new TÜV inspection, we are pleased to offer a quote from our partner workshops. Please note that our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners at an additional charge. The information provided in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment should be checked separately where applicable. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 1997, Travel X/Y/Z: 1000mm/750mm/750mm, table-spindle distance range: 118mm-865mm, table dimensions X/Y: 1150mm/700mm, max. table load: 1000kg, speed: 12000rpm, tool positions: 30, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4500mm/3200mm/3100mm, weight: approx. 9500kg, spindle hours: 3427h. The tool changer is defective. Revisions in 2023: Z motor, axis lubrication, Z-axis guide carriage, Z module and interface. Documentation available. An on-site inspection is possible. Lajdpfxezc Rfns Ammec