Used Rhs Gmbh Digestate Dryer for sale (70,417)

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor Bdedew Ivk Topfx Ahmsh and much more upon request!

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Bdodpfx Asw Ivqmjhmjh a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Bjdjw Ivr Djpfx Ahmjdh Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) Bdedpfew Ivvcjx Ahmsh - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator - Final Demagnetizing Stage - Magnetic Drawer

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Bjdjx El A Uepfx Ahmedh Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Bdodpfox Hf Tvjx Ahmoh Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. Bjdpfstwb U Asx Ahmsdh The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total length: 1,300 mm, total width: 1,040 mm, total height: 1,240 mm, overall weight: 475 kg, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing: black-grey structure (RAL 7021) Pull-outs : black-grey structure (RAL 7021) Bodpfour N Ryex Ahmedh Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Bedpeuv Ecnsfx Ahmsdh Payload per pull-out 900 kg Weight: approx. 363 kg Fully assembled as a set including 4 WKH 210 tool holders 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Bdsdjuv Edlspfx Ahmoh Completely assembled as a set including 4 tool holders WKH 210 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 517 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 2,140 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product number: Swiss commodity code: Origin: DE/08 Weight: approx. 517 kg Fully assembled as a set including 6 tool holders WKH 210 6 tool holders WKH 211 Bodpfx Ahsuv Emmsmodh 5 tool holders WKH 212 5 tool holders WKH 213 4 tool holders WKH 214 4 tool holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Unladen weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Bdsdpevptrtsfx Ahmjh Controlled by PLC Hydraulic tank: 100l New exhibition machine with 5 operating hours

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Bedpfxexzukke Ahmodh Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar Bdsdpfx Ajxugifohmsh 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min Bodpfxjwh Rp Ej Ahmedh - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. Bodpfexaxr Njx Ahmjdh 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Bdsdew E H E Ropfx Ahmeh Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Bjdpfxowxlyge Ahmodh

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended Bjdpfxjx R Uzdj Ahmedh

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Bdedpfx Aszpzbfshmsh Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Bdsdpfszp Iqmox Ahmoh Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip with steel lid, 3000 x 2000 x 1250 mm Product description: For sale is a skip with a steel lid, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Bdedjzq E R Tepfx Ahmeh Technical specifications: - Base: 3 mm - Sides: 3 mm - Steel lid: 2 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the base of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - The entire range of RAL colors is available - Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear Bdodszq Uvxjpfx Ahmoh - Ortlinghaus brake and clutch combination - Tilting roller table or sheet metal lifting system with plastic rollers - Central lubrication system

Condition: used, Year of construction: 2021, operating hours: 4,856 h, functionality: fully functional, Equipment: Basic package Inventhor 6: - Load-Sensing System - Fuel tank (500 liters) - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned lubrication strips - 24 V electro-control with additional electric pump for operation of the following functions when engine is off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GFRP (fiberglass reinforced plastic) service doors - Service-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Service ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: Drive System * CAT diesel engine C9.3B, 310 kW at 1,800 rpm, complies with EUROMOT V emission standard * Roller drive via planetary gearbox 310 kW (VARIO) 400 mm Track Chassis Unit - Track chassis with 2 travel speeds - Track width: 400 mm, triple bar - Drive via chassis gearbox with variable motor - Total weight approx. 24,000 kg Shredding system Size "L" complete (Variomat System L 600/4 - 30 teeth) Additional comb bar Size "L" complete, with 14 comb teeth Size "L" limiter (7 pieces), incl. mounting bar and fastening material Bdjdpeywyuijfx Ahmjh Additional hydraulic connection 35 l/min to 80 l/min 400 mm flat track chassis Right-hand side door protector panel complete Left-hand side door protector panel complete Three-sided hopper extension H=350 mm Rear conveyor 4.9 m, 1,000 mm wide, hydraulically foldable, with anti-magnetic center section Overbelt magnet - Neodymium Frame for overbelt magnet Delivery date upon agreement

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. Bjdpfx Aezkqdxehmodh "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!