Used Rogi Wmd20Lv Brushless for sale (371)

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash Pgjdpfx Ajx E Tmbjirot • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator Pgsdpfx Aey Ephaeiret • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. Psdezh Hbnepfx Airogt • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Pgjdpjxqr Sqofx Airjt Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Condition: new, ROGI BAND SAW MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw blade dimensions ----- 3770 x 34 x 1.1 mm Saw blade speeds ----- variable 20-80 m/min. Motor power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity at 90° ----- 355 mm / 490 x 300 mm Cutting capacity at 60° ----- 230 mm / 180 x 220 mm Cutting capacity at 45° ----- 350 mm / 290 x 340 mm Pgedpfxega Tzxs Airst Cutting capacity at -45° ----- 290 mm / 250 x 250 mm INCLUDED Saw blade Workpiece stop Base cabinet Pressure gauge for saw blade tension Saw blade guide with carbide inserts Hydraulic quick-release clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic shut-off

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, number of slots in tool magazine: 16, controller manufacturer: siemens, controller model: sinumerik 840D, feed rate X-axis: 800 m/min, feed rate Y-axis: 800 m/min, feed rate Z-axis: 600 m/min, spindle motor power: 6,500 W, number of spindles: 2, rotational speed (max.): 30 rpm, spindle nose: HSK F50, spindle speed (max.): 36,000 rpm, Equipment: documentation/manual, 5-axis CNC machining center for machining plastic and composite parts. Immediate availability. Cartesian suspension bridge construction. Axis motion: brushless servomotors, rack-and-pinion systems, guides with preloaded recirculating ball bearings. Psdpfx Aijtphpiorsgt X 2500mm 80m/min Y 1500mm 80m/min Z 900mm 60m/min C 540° 30rpm A 315° 30rpm Rotary table with mounting holes and jig centering. Head: 2 heads c.u. 8 positions 6.5kW (S1) HSK F50 36,000 rpm liquid cooling. CNC: Siemens Sinumerik 840D Lubrication: automatic grease Supply voltage: 3 x 400V / 50Hz (+/- 5%) Supply pressure: 6 bar Installation: upon request

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 1,800 mm, total length: 5,000 mm, 1x CNC CUTTER CT-163MB V2 Effective working width 1650 mm Cutting window length 4500 mm Dsbig Eqasywzkxeaekk Total length about 6000 mm Design: stationary cutting machine, with linear guidance in the X and Y direction for high mass acceleration Brushless torque servo motors OMRON. Operating system Windows 7 Ultimate 1 Laying machine Manual feeding of the laying wagon Inc. Edge control and automation. Cutting machine Supply via servo motor control assembly is carried out on the CNC cutter Pgsdpfxoywzkxj Airet

Condition: new, Center distance ----- 1000 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Main spindle bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW Psdpoga Tz Uofx Airegt HEAVY-DUTY DESIGN - WEIGHT 2400 KG INCLUDES * 3-axis digital read-out system, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool holders * 3-jaw chuck 250 mm * 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and follower steady rest * LED work light and coolant system * Electric brake CE * Toolbox with various tools

Condition: new, Universal shear for cutting metal sheets. Includes base frame. Working length: 1000 mm Pgodpfx Ajga T Efsirot Sheet thickness: 1.5 mm Weight: 70 kg

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, total height: 4,100 mm, total width: 5,800 mm, overall weight: 2,100 kg, product length (max.): 7,500 mm, number of axes: 3, This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details. • Max worktable size: approx. 4,150 × 2,080 mm • Cutting system • Technology: Abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Max cutting thickness: up to 220 mm (material dependent) • Interpolated CNC cutting for complex shapes • Automatic Z height control • Axes and motion • CNC controlled axes: X, Y, Z • Motors: Brushless Pgodpfszh Itxjx Airot • Guides: Recirculating ball linear guides • Drive system: Rack & pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Waterjet pressure system • Maximum working pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: High-pressure intensifier pump 30 CP included; see Additional equipment • Control and software • CNC control: OSAI Open • HMI: CMS Active interface • CAD/CAM: EasyCut / EasyPump compatible • Touchscreen control panel on mobile stand • Worktable and load • Material support: Steel grid table • Max table load: approx. 500 kg/m² • Electrical and utilities • Power supply: 400 V / 50 Hz / 3-phase • Installed power: approx. 35–40 kVA (configuration dependent) • Protection class: IP54 (control cabinet) • Safety and equipment • Safety guards and photoelectric barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for cutting head • Laser pointer for zero-point setting • Electrical cabinet and control console Additional equipment • High-pressure intensifier pump (30 CP) • Abrasive feeding system (270 kg capacity) • Air compressor

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE Psdjzbub Dopfx Airsgt • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Pgjdpfxey Umhkj Airst Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: new, Center distance ----- 2000 mm Center height ----- 330 mm Turning diameter ----- 660 mm Main spindle bore ----- 105 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 kW HEAVY-DUTY DESIGN - WEIGHT 4080 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders * 3-jaw chuck, 325 mm * 4-jaw chuck, 400 mm * Faceplate, 630 mm * Fixed and traveling steady rest Psdpoga T Acofx Airegt * LED work light and cooling system * Box with various tools

Condition: new, Motor ----- 900W Voltage ----- 400V - 3 Phase Speed ----- 2950 rpm Grinding wheel dimensions ----- 250 x 32 x 32 mm Coarse grinding wheel ----- Grit 36 Fine grinding wheel ----- Grit 80 Safety class ----- IP40 Weight ----- 32 kg OPTION * Base cabinet Price: €99.00 excluding VAT Pjdoga Tw Aopfx Airjgt

Year of construction: 2007, condition: excellent (used), AUTOMATIC BENETA VENUS BANDSAW – USED Pgsdpfx Ajhknb Deiret Beneta Venus model bandsaw for cutting curves and straight lines, automatic with an outfeed table – used. - Vertical axis X: 1600 mm - Vertical axis Y: 450 mm - Maximum speed of axis X: 50 m/min - Maximum speed of axis Y: 50 m/min - Total installed electrical power: 6.5 kW - Maximum installed pressure: 6-7 bar - Brushless motor, axis X: 6 Nm - Brushless motor, axis Y: 2.3 Nm - Digital control - Standard cutting length: 0-1500 mm - Standard cutting height: 0-120 mm - Cast iron flywheels diameter: 800 mm - Bandsaw blade dimensions: Minimum length 5330 mm, maximum length 5350 mm, minimum width 13 mm, maximum width 20 mm - Motor power: 7.5 HP - Machine dimensions: 3,900 x 3,500 x 2,500 h, weight 4,650 kg

Condition: new, HR300 Rogi mini roller Rolling capacity ----- 1 mm Pgodpjga Tzbjfx Airst Working length ----- 300 mm Roller diameter ----- 30 mm Weight ----- 10 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter over bed slide: 560 mm, turning diameter over top slide: 356 mm, center height: 280 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, type of input current: three-phase, three-jaw chuck diameter: 320 mm, Center distance ----- 1500 mm Center height ----- 280 mm Turning diameter ----- 560 mm Main spindle bore ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 kW INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders * Electric brake * Foot brake * Self-centering 3-jaw chuck Pjdpfsga Tvljx Airsgt * Independent 4-jaw chuck * Faceplate * Fixed and traveling steady rest * LED work light * Cooling system * Box with various tools

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Headstock bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY-DUTY DESIGN - WEIGHT 2650 KG INCLUDES * 3-axis digital readout, brand SINO Pgsdpeh U Nztefx Airjt * Quick-change tool holder, type Multifix TOOB2 with 4 tool holders * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Fixed and follow rest * LED work light and cooling system * Electric brake, CE * Toolbox with various tools

Condition: new, Motor ----- 500W - 230V - Single-phase Speed ----- 2950 RPM Dimensions of grinding stone ----- 175 x 25 x 32 mm Coarse stone grit 36 Fine stone grit 80 Safety class ----- IP40 Weight ----- 17 kg OPTIONS * Base cabinet Pgsdpoga Tw Rjfx Airjt

Condition: new, Motor: 900W - 230V - 1 Phase / 900W - 400V - 3 Phase Speed: 2950 RPM Stone dimensions: 200 x 32 x 32 mm Coarse stone grit: 36 Fine stone grit: 80 Safety class: IP40 Weight: 25 kg OPTIONS Pjdpfx Aisga Tw Ueregt * Base cabinet

Condition: new, Saw blade --- 2925 x 27 x 0.9 mm Saw speed --- variable, 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity at 90° --- 270 mm / 260 x 320 mm Cutting capacity at 60° --- 140 mm / 140 x 140 mm Cutting capacity at 45° --- 230 mm / 220 x 220 mm Cutting capacity at -45° --- 200 mm / 220 x 150 mm Psdpfega Tzujx Airogt INCLUDED Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Quick-release clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min Psdpfxszumvxo Airegt ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Pjdpfoyh I Tksx Airogt Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Podpozrvvvjfx Airegt

Condition: new, Grinding wheel, diameter x width ----- 200 x 32 mm Spindle bore ----- 32 mm Grinding wheel ----- Grit 36 Wire brush, diameter x width ----- 200 x 20 mm Speed ----- 2850 rpm Motor ----- 900W - 230V - 1 Phase Motor ----- 900W - 400V - 3 Phase Weight ----- 26 kg OPTIONS * Base cabinet Pgjdpfx Aoga Tw Hsirot Price: €99.00 excluding VAT