Used Seco Secodex R220.13/23-8200-C Ø 210 Mm for sale (114,692)

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø Kodpfx Abjh Nv Itj Denb - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Year of construction: 2025, condition: new, Drum Shot Blasting Machine; The system consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Screen. Ksdpfxevliuce Ab Donb Shot blasting is performed by having a rubber belt wound over three drums rotate the virtual barrel-shaped chamber while the turbine propels steel shot onto the workpieces. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by turbines (hot points) are reinforced with manganese wear-resistant plates, while other areas are supported with Hardox plates. (Complete manganese plate cladding is optional.) Wear-resistant claddings are designed with bolts to facilitate future part replacements due to wear. Replacement can easily be carried out by your company's authorized personnel. The wear-resistant plates are bolted for easy future servicing. Dimensions of the TK - 6 PREMIUM machine: Drum diameter Ø: 1000 mm, Length between discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 model Ø 320 mm, 7.5 kW motors. Equipped with a rubber belt conveyor.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual operation / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Knodpfx Abjy I Tdxe Djb Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test specimen control Scope of supply: CTS Climate Test Chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Other: Inspection possible by arrangement Loading can be organized Commercial sale (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Grinding drum, deflection drum, belt sander, belt sander, drum sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 300 mm -Drum: Ø 300 mm -Capacity: Ø 40 x 300 mm -Quantity: 1 drum available -Dimensions: Ø 300 x 300 mm Kjdpevxqlcjfx Ab Donb -Weight: 23 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Ksdjz A Ah Repfx Ab Donb Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Kedpfx Abjcnwyde Denb Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Kjdpfjzmrmyjx Ab Donb Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Ksdpfx Ajzww Sieb Djnb Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz - Variable speed control via SEW frequency inverter - Cable remote control Knjdpfx Aezgx A Iob Dob - Clockwise and counterclockwise rotation - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Storage of up to 8 wrapping programs Film tension control with mechanical brake Kodpfomt Du Nex Ab Dsnb Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1650 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Knodpfxjzmqx Is Ab Dob Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: used, Mitsubishi Electric MR-S12-100B-E01 Version C Servo Drive / Controller For sale is a used Mitsubishi MR-S12-100B-E01 Version C servo drive / servo controller. The unit was removed from a working machine and shows normal signs of use. Ideal as a spare part for CNC machines, automation systems, and industrial production equipment. Technical Data Manufacturer: Mitsubishi Electric Model: MR-S12-100B-E01 Version: C Type: Servo Drive / Servo Amplifier Made in Japan Condition: Used Removed from a working machine Cosmetic condition: see pictures Scope of delivery as shown in the photos Knjdpfx Aboy Ubbxs Dob Notes 7-day functional warranty

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation Kodpfexlcufsx Ab Denb

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Kjdjy E Rt Ejpfx Ab Denb Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Price

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: infinitely variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Working path lengthwise 500 mm Transverse travel 300 mm Feed rates 0.02-0.6 mm/min Connection 50 Hz 3x 380 Volt Power 4.0 kWA Machine weight approx. 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical data not binding. ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: continuously variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Longitudinal travel 500 mm Working distance across 300 mm Feeds 0.02-0.6 mm/min Connection 50 Hz 3x 380 volts Power 4.0 kWA Machine weight approx. 2110 kg Dimensions machine: length 1700 mm, width 1400 mm, height 2100 mm Technical data non-binding. Kedeu Tn Raopfx Ab Donb

Condition: good (used), 1) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B1) Application: Long cut circular saw Note: little used, top condition Technical description: ● Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 2) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 3) Used carbide circular saw blade for sawing aluminum Article: 80040160 TFZ neg (GEBR-B3) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 800 mm ● Mounting hole 40 mm ● Teeth 160 Kedpfxotzwtbj Ab Donb ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 6 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 2.8 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 4) Used carbide circular saw blade for sawing aluminum Article: 99040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 990 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 3.7 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm

Condition: used, functionality: fully functional, Dosomat cup filling machine, type: 10/3, cup diameter: ø 83 mm x 30 mm, overall dimensions: 1810 mm x 1700 mm x 2050 mm. Knjdpsv Ev Nasfx Ab Djb

Condition: used, Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel Ksdpfx Absqva I He Denb -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm -Receptacle: Ø 203 mm -Total weight: 18.9 kg

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal Knjdoyguz Uopfx Ab Deb • Tool magazine: 30 positions Technical Specification Taper Size ISO 50

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 220 mm .: 171 CO 33M Kodpfxev N Uy Ss Ab Denb -Piston rod: Ø 32 mm / M24 -Dimensions: Ø 125 x 430 mm -Weight: 17.2 kg

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Kodpezcfhqefx Ab Denb

Condition: excellent (used), Manual rotary table Ø 450 mm Knedpfxozwxiis Ab Dob Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg In very good condition

Year of construction: 2019, condition: excellent (used), Automatic pallet wrapper Knsdpfezadbwsx Ab Dob Film pre-stretching Inventory no. 3828 Manufacturer: Certis Type C-ONE * Year of manufacture: 2019 * Turntable positioning via Fix-Stop * Number of top and bottom wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2200 mm * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) Ksdpevgrl Hofx Ab Donb including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Knjdpjxvy Rlofx Ab Dob Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.