Used Server Cabinet for sale (3,952)

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm Lredpfjd Atipsx Aa Rer - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm Lodpfod Atghex Aa Rerr - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Lrjdpozlic Nofx Aa Ror Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor Ljdpfjznd Sksx Aa Rsrr - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: excellent (used), functionality: fully functional, MITRE SAW model OMS SALVARANI FC 300 RAP with dust aspirator second hand machine working conditions : good complete with extractor cabinet volt. 380/50 blade diameter mm. 300 MITRE SAW model OMS SALVARANI FC 350 RAP with dust aspirator second hand machine working conditions : good complete with extractor cabinet volt. 380/50 blade diameter mm. 350 MITRE SAW model OMS SALVARANI model FC 350 with dust aspirator second hand machine working conditions : good complete with extractor cabinet Ljdpfx Aajzghdzo Rerr volt. 380/50 blade diameter mm. 350 Swivel and tilting miter saw model ELU TGS 173 A4 second-hand machine blade diameter mm. 250 volt. 220

Condition: new, For sale is a sturdy GARANT workbench featuring a solid worktop, an integrated drawer cabinet, and a mounted GARANT vice. Ledpoznm Eajfx Aa Rorr The workbench comes fully assembled and is ideal for use in workshops, production, assembly, maintenance, or professional hobby settings. Manufacturer prices Workbench: €1,712.41 (gross) Vice: €480.91 (gross) Total new price: €2,193.32 (gross) Product specifications Manufacturer: GARANT Product type: Workbench / work table Workbench part number: 922771 2000/7 Worktop: approx. 2,000 × 700 × 50 mm Working height: approx. 950 mm Drawer cabinet: mounted on the right Vice: mounted on the left Vice model: GARANT 967110 160 Jaw width: 160 mm Base frame: sturdy metal construction Configuration: fully assembled Condition: used The integrated drawer cabinet offers ample storage space for tools, equipment, and accessories. The GARANT vice is securely mounted on the left side of the worktop and is suitable for a wide range of clamping and assembly tasks. The workbench shows signs of wear consistent with age and use. Please refer to the images for the exact condition and scope of delivery. We also offer an identical workbench in a mirrored configuration—with the drawer cabinet on the left and the vice on the right. Ideal if a second matching workbench is required. You can find more workbenches—both new and used—in our shop!

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head Lrsdpszpfy Sjfx Aa Rjr -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm Ljdpezpg Uqsfx Aa Rsrr -Bar capacity 34mm -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center -Work light -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted.

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Lrodpfjzgvlysx Aa Rjr

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00655, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Lodpezqt Nksfx Aa Rsrr Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Lsdpfezp H R Eox Aa Rerr Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: ready for operation (used), Year of construction: 2007, clamping force: 1,000 kN, This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) Lsdpjx D Hgvsfx Aa Rsrr • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: excellent (used), Year of construction: 2003, Boschert EL500 Digital punching machine TRUMPF quick tool change system up to tool size III = diameter 105 mm Punching force: 280 kN (28 tons) Punching arm overhang 560 mm Side stop 1000 mm right/left Equipped with digital display for X-axis (left) and Y-axis (left) Stroke: 40 mm Total weight: 2700 kg including tool cabinet with tools and accessories Ljdpfxsid I Hho Aa Rorr

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Ledpfx Aowl Rucoa Rjrr Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Lrjdpfezqvnvex Aa Rsr Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed)

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Ljdpfx Aaszq Sqgo Rjrr Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: excellent (used), AVAILABLE FOR ONE WEEK ONLY – 2 × LOOS INDUSTRIAL STEAM BOILERS For sale are two complete LOOS industrial steam boilers, equipped with Weishaupt burners and Siemens Simatic control systems. Technical Data Per Boiler * Manufacturer: LOOS * Year of manufacture: 1994 * Steam capacity: 3,200 kg/h * Thermal output: 2,087 kW Lsdpfxozqyv Rs Aa Rjrr * Maximum operating pressure: 10 bar * Water capacity: 3,890 litres * Maximum operating temperature: 183 °C * Burner: Weishaupt RL40/2-A multiflam * Burner year: 2013 * Control system: Siemens Simatic * Quantity available: 2 units The boilers are offered as complete industrial units, including burners, control cabinets, safety equipment and installed accessories visible in the photographs. Suitable for industrial applications requiring process steam, including food production, laundries, manufacturing plants, chemical processing and other steam-consuming facilities. IMPORTANT: THESE BOILERS ARE AVAILABLE FOR ONE WEEK ONLY The equipment must be reserved within this limited period. After one week, availability can no longer be guaranteed. The boilers can be purchased individually or together. Inspection can be arranged by appointment. Assistance with dismantling, loading and international transport can also be provided. Serious enquiries only. Márton Pauker Top Heating Systems

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The Forstner nuSLIT Series makes all your dreams come true, in a modern sheet metal workshop and takes your production to a new level consider flexibility and productivity. With nuSLIT every function can be operated from the touch panel: coil width, finished lengths, straightening pressure to avoid stop marks, the width settings and operation of the slitting knives. nuSLIT can be integrated in a programmed production flow. The control system is totally compatible with nuIT, allowing you to plan and program your entire production from your office desk with no manual intervention. Combine with the number of decoilers you want and a manual or powered coil selector. There isn’t a better slitting and cut-to-length machine on the market! The most important advantages: Alternating knife arrangement Ljdpfx Aaowy Hxao Rorr Unbeatable slitting precision Innovative clamping system Control system can be integrated with nuIT Fastest knife change on the market

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Ledpfx Aaszrgfhs Rorr Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Lodpfsyugctox Aa Rsrr Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm Ledpfszq Axzjx Aa Rerr • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 24205, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 4,800 mm, workpiece width (max.): 1,800 mm, number of slots in tool magazine: 18, overall weight: 16,000 kg, spindle motor power: 12,000 W, number of spindles: 1, workpiece diameter (max.): 1,800 mm, Equipment: chip conveyor, documentation/manual, Exceptional machine and exceptional quality output. Machine was serviced by IMA technicians and original spare parts where used. Optic fiber and most of the compressed air pipes have been replaced with new ones. The automatic positioning of the vacuum cups is speeding the setup time. ImaWoop version 6.0 with Quicktool is making the operator life easier. You are always welcome to see the machine working. Anytime, a live visualisation of the machine through video link is available. CNC-portal processing centre make: IMA type: BIMA P 480 V, 180/480 Year of production: 2001 Short description Machine able to do a lot of complex tasks (milling, drilling, cutting, edgebanding, various angle cutting) - alternate processing - X = 2 x 2.400, Y = 1.800 mm - main spindle 12 kW - 18-fold tool changer - gluing unit with 6-fold coil-magazine Description working area with standard units Y = 1.800 mm changing table area with alternate processing: X = 2 x 2.400 mm /milling- and boring processing X = 2 x 2.100 mm /gluing processing CNC-line control IMATRONIC NT 231 Software Imawoop 6.0 automatic positioning of the vacuum cups Automatic lubrication Conveyor for waste and chips (belt) main spindle 12 kW with integrated C-axis 360 degrees autom. tool / adapter units changer 18-fold 1 edge gluing unit VT100 with glue application device edge thickness: 0,4 – 3 mm for 4-sided edgebanding and all around edgebanding with butt joint 6-fold coil magazine 1 end-trimming unit 0,8 kW Ledpett Rpwjfx Aa Rerr adapter units included - saw, 90 degrees fixed - horizontal drilling unit with 4 ways - ABS edge milling unit - ABS edge radius scraper and horizontal scraper unit other adapters and tools available for extra cost Chip removal transport belt Air conditioned included in the electric cabinet

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Ledpfx Aaeypud Us Rorr

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Ljdpfeztar Rsx Aa Rsrr Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption Lredpfx Asy Apdqsa Ror \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg