Used Shaft Grinder Swb-25 for sale (20,981)

Condition: like new (used), Year of construction: 2017, operating hours: 186 h, load capacity: 2,500 kg, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, Manufacturer + model: LINDE R 25 Mast: 3F4350 ID: 25106.2245 Category: New Fpsdpsy Itlpefx Ad Njg Mast: 3F4350 Lowered height: 2170 mm Lifting height: 4350 mm Capacity: 2500 kg Year: 27 Hours: 186 hours !!!! Battery capacity: 48 v / 930 ah - manufactured 10 / 2023 Options: FULL cabin!! LINDE steering - Duo pedal!! Heated CABIN!! Wipers front & top & rear!! Cabin height = 2170 MM (+ beacon 140 MM) Complete in NEW condition!!!

Condition: like new (used), Year of construction: 2020, operating hours: 1,312 h, load capacity: 2,500 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, Manufacturer + model: LINDE E 25 L - 387 / 01 * EX * Miretti 3GD / Zone 2 & 22 Mast: 3F4760 ID: 25061.4742 Category: Used Mast: 3F4760 Lowered height: 2160 mm Lifting height: 4760 mm Capacity: 2500 kg Year: 2020 Hours: 1312 hours Capacity: 80 V / 625 Ah Options: CONTAINER specs!! * EX * MIRETTI!!!!! System = Miretti ATEX - 00101 Ref = E11138 Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp. class = T3 Gc Type = Cat 3D (approved for ZONE 22 - Dust) Fpodpfsy Itg Tox Ad Nog Gas group = IIIB Temp. class = T200°C Dc Equipped with: - FULL cabin - Complete street lighting - Joystick control forward/reverse - Spreader / S.s. - Sunshade for windscreen & roof - LED spotlight - Triplex FFL mast - Flashing beacon - Completely new tires all around (with ATEX specs) LIKE NEW condition!!!!

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 13091/91, rotor width: 800 mm, filling opening width: 800 mm, filling opening length: 1,000 mm, year of last overhaul: 2026, input voltage: 400 V, The machine has been completely overhauled, with all bearings and motors replaced with new ones. The electrical cabinet with the control unit is permanently mounted. The chip discharge is designed for a suction system. The machine is ready for operation and can be connected with a 32 A EU plug. Fodpfxjy N Nwqs Ad Njpg

Condition: new, Type MB506C Fodpfsd Srkbsx Ad Nspg Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Condition: used, Year of construction: 2013, operating hours: 26,721 h, functionality: unexamined, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, table length: 245 mm, table width: 140 mm, SAACKE UW1F Center height: 155 mm Maximum tool diameter: 200 mm Maximum tool length: 270 mm X/Y/Z travels: 530/400/320 mm Feeds: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Rotation range: 240° Rotational speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Rotational range: ± 15 minutes Maximum speed: 600 rpm Spindle bore: 32 mm Axis drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: End mills Profile cutters Clamping systems Drills and step drills Roundness regulation 3D collision control Zero point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Fpedpfsyma I Hox Ad Njg Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006

Condition: new, Year of construction: 2026, COSMOS SG 1050 NC precision surface grinding machine with a grinding area of 1000 x 500 x 400 mm, 7.5 kW spindle power, grinding wheel 400 x 100 x 127 mm, automatic grinding cycle, Mitsubishi PLC control, easy and user-friendly operation, including magnetic chuck 1000 x 500 mm with adjustable holding force, automatic dresser mounted on spindle housing with size compensation, water tank with paper band filter, stepless adjustable spindle speed, full enclosure. We are happy to handle installation and on-site training, as well as subsequent service. 12 months warranty, excellent price/performance ratio! Financing and leasing available; we will be happy to provide you with an offer! Fsdpfx Ajhzlm Hod Nspg

Condition: new, Year of construction: 2026, Grinding area 1000 x 450 mm, rotary table diameter 1000 mm, grinding wheel 400 x 100 x 127 mm, spindle power 11 kW incl. speed control, electro-permanent magnetic chuck diameter 1000 mm with holding force adjustment, automatic dresser mounted on spindle housing incl. dressing amount compensation, coolant system with paper band filter, user-friendly operation with Mitsubishi PLC control, alternatively SIEMENS 828 CNC control, new machine with 12-month warranty, highest precision at an unbeatable price/performance ratio. Grinding tests can be performed on our exhibition machine. We provide installation and training at your site, as well as future service support. Financing/leasing available, please contact us for an offer! Fsdjh I Tz Sspfx Ad Nopg

Condition: used, Year of construction: 2001, operating hours: 1,200 h, Equipment: all wheel drive, Haulotte work platform / aerial lift year 2001 25 meters 4x4 - all-wheel drive Hatz diesel engine Delivery possible to DE/AT/BEL/NL/SLO/HR Tel: We are happy to assist with your financing or leasing EU sales: net price upon presentation of company documents and VAT number Fodpjxpmh Djfx Ad Nspg VAT deposit: €2,000 We speak English We speak Serbo-Croatian Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich Airport or Passau Train Station Tel:

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm Fpsdpfxey I Sfhe Ad Nog - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled) Fodpfx Aoy Ichged Njpg

Condition: excellent (used), functionality: fully functional, Vertical lathe in excellent condition. Technical specifications: Machine weight: 54,000 kg Fpodpfjy Rl D Ajx Ad Nsg Total connected load: 83 kW Max. workpiece diameter: 2,600 mm Max. workpiece height: 1,600 mm Max. workpiece weight: 15,000 kg Chuck speed: 2,400 rpm

Condition: excellent (used), GEA Autogrind frozen block grinder. With introlux belt indeed for full frozen blocks. s/s worm. Fsdoy E Ip Rspfx Ad Nspg

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Fpjdpfjyvv Ddjx Ad Njg Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Fpedpex A Tc Iefx Ad Njg Total number of tool changer positions: 32

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, Fpjdpfx Adoqvml Rs Nog feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: ready for operation (used), Surface grinder, travel (mm): X485, Y170, Z350, hydraulic, grinding wheel diameter 177.8 mm, 1.5 kW, 2800 rpm, with digital readout. Fpodpfsy N S Sqex Ad Nsg

Condition: used, Andritz twin-shaft lump breaker / clod breaker Fully constructed in stainless steel Fodpfx Adey Iclrj Nepg Motor power: 15 kW Rotor speed 1: approx. 600 rpm Rotor speed 2: approx. 300 rpm Inlet dimensions: 600x300 mm Installation height: 420 mm See our other listings

Condition: new, Year of construction: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two hand wheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI Fodpfx Aoxyyxwsd Njpg grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. 2-in-1 pipe grinder The AL150 is equipped with a deburring table with which the pipes can be easily deburred, making the pipe grinder multifunctional.

Condition: new, Year of construction: 2026, Motor: 4 kW Fodexyyx Djpfx Ad Nopg Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust.

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm Fpedoy H Db Ejpfx Ad Njg

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard CNC-Ready Ex Works Fpsdpfxec Txdhs Ad Neg - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,700 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled Fedpfx Adjy Rfryj Njpg The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The fully automatic Strapex SMG 25 strapping machine was manufactured in 2022 and features an arch size of 1650 x 500 mm. It processes straps with a width of 12 mm. Activation can be performed via the additional foot switch or the integrated foot switch on the machine. Strap tension is adjustable up to approximately 450N. With height-adjustable feet, the working height can be comfortably set between 720 and 950 mm. Included is an additional roll of PP strap. The original price is approximately €19,500. Fsdpfoyuqnasx Ad Nepg The device has been function-tested and comes with an electrical safety check conducted by a certified electrical company. Loading by forklift is possible. Net price: €11,000 negotiable Price is subject to 19% VAT. Cash payment on collection is possible.

Condition: used, mileage: 10,616 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, EBS, For any inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (Tel. ...). MAN LE 8.150 4x2 Firefighting Vehicle Body: 2500 F, 2,500-liter foam tank, Schmitz: SLF 25/25, number of seats 3, manual transmission, cruise control, engine brake, ABS/ESP/ASR, PTO, halogen headlights, rotating beacons, 40 mm Rockinger coupling, tire tread: 1st axle 12-13 mm, 2nd axle 13-14 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. You can find more information on our homepage. ... Errors, changes, and prior sale reserved!!! ESP Cab type: Short-haul = Further information = Engine displacement: 4,580 cc Gross vehicle weight: 8,600 kg Fodpfx Adsy Ivq Uo Njpg Please contact Tobias Ebert for more information.

Condition: used, mileage: 6,119 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, EBS, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). MAN LE 8.150 4x2 Fire Truck SLF 25/25, 100 liters, 2,500 liters, number of seats: 3, manual transmission, cruise control, engine brake, ABS/ESP/ASR, PTO, halogen headlights, rotating beacons, 40 mm Rockinger trailer coupling, tire tread: 1st axle 12 mm, 2nd axle 13–14 mm. Fpedsy Ivq Ispfx Ad Nog Upon request, we will provide a leasing or financing offer. Mr. Seidel (by phone) will be happy to assist you. Further information is available on our website. ... Errors, changes, and prior sale excepted!!! ESP Cab type: Local transport = Further information = Engine displacement: 4,580 cc gross vehicle weight: 7,800 kg Last inspection: 2027-12 For more information, please contact Tobias Ebert.