Used Sick Control System D for sale (83,012)

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. Nwsdpsyx Hpiofx Ag Dsf 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: used, mileage: 22,964 km, power: 129 kW (175.39 HP), first registration: 11/2024, fuel type: diesel, fuel: diesel, CO₂ emissions: 274 g/km, color: white, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 3, total length: 7,680 mm, total width: 2,050 mm, total height: 2,950 mm, Year of construction: 2024, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, navigation system, onboard computer, power assisted steering, power mirror, sliding door, traction control, = Additional Options and Equipment = - 12-volt power socket - Armrest - Passenger airbag - Third brake light - Driver airbag - Remote central locking - Tinted glass - Wood trim - Height-adjustable driver’s seat - Height-adjustable steering wheel - Air conditioning - Leather steering wheel - Leather gear knob - Multifunction steering wheel - Rear parking sensors - Radio - Reversing camera - Left-hand side sliding door - Right-hand side sliding door - Immobilizer - Bluetooth phone = Further Information = General Information Number of doors: 6 Model year: 2026 Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Weights Unladen weight: 2,318 kg Payload: 1,182 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Maintenance, History, and Condition Number of owners: 2 MOT (Technical Inspection): valid until 11.2027 Nwsdpfx Aeykzzcjg Djf Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: used, mileage: 36,599 km, power: 129 kW (175.39 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 4x2, CO₂ emissions: 300 g/km, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2024, number of previous owners: 2, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, navigation system, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Equipment = - 12-volt power socket - Passenger airbag - Third brake light - Electrically adjustable exterior mirrors - Driver airbag - Tinted glass - Air conditioning - Leather steering wheel - Leather gear knob - Multifunction steering wheel - Radio - Reversing camera - Right-hand side sliding door - Immobilizer = Further Information = General Information Number of doors: 5 Model year: 2026 Cab type: Single cab Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Transmission: 8-speed automatic Dimensions Nwedjyk Ai Ispfx Ag Dof Length/Height: L3H2 Dimensions (L x W x H): 768 x 205 x 294 cm Weights Curb weight: 2,389 kg Payload: 1,111 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Maintenance APK (roadworthiness inspection): valid until 12.2027 Warranty Warranty: BOVAG warranty - 6 months Warranty: 6 months Warranty: 10,000 km Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is designed for automatic crack detection on ring-shaped components such as bearing races and gears, using the eddyvisor C. Additionally, customers can test for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot handles and guides the sensor precisely along the contours of the test piece. The machine conducts tests using up to two probes. All relevant scan parameters and communication for controlling the eddyvisor C are integrated into the robot’s scanning program. At the heart of the system is the eddyvisor C 2-channel eddy current tester, which ensures reliable detection of cracks and grinding burn. Process automation is managed by an integrated Stäubli TX2-60 robot. The entire system is controlled and operated via a control cabinet featuring an integrated control and operator panel. A vertical spindle with a chuck securely clamps each test part during inspection. Non-conforming parts (NOK) detected during testing are automatically sorted onto two dedicated NOK discharge lanes. A separate staging area for reference and master parts supports calibration and continuous quality assurance during testing. The system includes the Optical Reflection Sensor by ibg (iORS) for precise, non-contact inspection of rings. Nodpsyx E D Eofx Ag Djwf For further information, please visit our website.

Condition: used, Year of construction: 2001, operating hours: 3,824 h, Rental possible = Further information = Please contact Tobias Ebert for more information. Nedpfx Agjyxkn Ae Dewf

Condition: new, Year of construction: 2025, power: 100 kW (135.96 HP), motor manufacturer: Cummins, General information Field of application: Construction Weights Empty weight: 13.000 kg Functional Generator capacity: 500 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Transport dimensions (LxWxH): 5,3x2,1x2,45 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nwjdpfew Dx Uusx Ag Def - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 9.424 kg Functional Generator capacity: 300 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Transport dimensions (LxWxH): 4,65x2,3x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nwedpfsw A Havex Ag Dsf - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Cummins, General information Field of application: Construction Nodpfx Aow Dx T Rjg Djwf Weights Empty weight: 4.000 kg Functional Generator capacity: 125 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 300 l Transport dimensions (LxWxH): 2,9x1,3x1,6 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Cummins, General information Field of application: Construction Weights Empty weight: 7.500 kg Functional Generator capacity: 375 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 650 l Transport dimensions (LxWxH): 3,95x2,1x2,45 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Nwedpfx Agsw Dx Uhs Dsf

Condition: new, Year of construction: 2025, power: 500 kW (679.81 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 14.240 kg Generator capacity: 500 kVA CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Nodpfx Ajw A Hbgsg Dswf Transport dimensions (LxWxH): 4,65x2,3x2,5 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Transport dimensions (LxWxH): 4,65x2,3x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nwodew A Ha Nepfx Ag Dsf - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 72 kW (97.89 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 3.000 kg Nodpfeuid Awox Ag Dowf Generator capacity: 72 kVA CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 1,6x1,1x1,6 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Nsdpfxjyxg Swj Ag Dswf - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,040 h, functionality: fully functional, machine/vehicle number: BK325172106187, type of input current: three-phase, feed length X-axis: 2,500 mm, working width: 1,700 mm, The machine has relatively few operating hours and is in good condition. However, the cutting mat needs to be replaced. Nsdpsxu Dh Esfx Ag Dswf

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Nwedpfx Aoyb Rpdog Djf The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Nsdpow A E U Sjfx Ag Dswf Emission level: Stage V / Tier V Transport dimensions (LxWxH): 2,25x1,35x2,25 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel - Tank

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Nedoyuvq Tspfx Ag Dswf Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, conveyor belt thickness: 4 mm, stack height: 1,400 mm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Nwedpoytcbpofx Ag Dsf Auction of a packaging line comprising the following main components: Bundle pick-up and tipper (Eich) Strapping unit (TITAN) Oiling station (Eich - Steidle) Wrapping station (Böhl) Centering table with gripper (Eich) Stacking station feed (Eich) Ready-for-dispatch station (STU) Electrical control system (wpe GmbH) Safety devices (Hengstebeck & Eich) TECHNICAL DETAILS Maximum bundle diameter: 1,500 mm Maximum bundle weight: 6,000 kg Maximum single ring width: 600 mm Strap thickness: 0.1 - 4.0 mm Maximum package weight: 6,000 kg Maximum package height: 1,400 mm EQUIPMENT Complete documentation and software Note: Dismantling and loading can be offered by the seller for €60,000.

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm Nwedeyaqg Tepfx Ag Def

Condition: used, Year of construction: 2022, TOYOTA Shelves - console system/double-sided, 27 shelves, height 7.5 m Nedpfxeytnbzj Ag Djwf

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Nodpfx Ageyrr I Aj Djwf Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: excellent (used), mileage: 880,000 km, power: 345 kW (469.07 HP), first registration: 03/2016, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, AdBlue, cruise control, differential lock, electric window regulation, parking heater, power mirror, spoiler, traction control, = Further options and equipment = Nwodjxtbhgepfx Ag Dof - 2 beds - ABS / EBS - Aluminium fuel tank - Heated mirrors - Brake booster - Comfort driver's seat - Roof spoiler - Differential lock - Speed limiter - Hydraulic system - Tipping hydraulics - Refrigerator under bed - Multi-function steering wheel - Radio / CD player - Sleeper cab - Sun visor - Auxiliary heater - Pre-heating automatic system - Power Take-Off (PTO) = Remarks = NICE & CLEAN CONDITION RENAULT T460 HIGH-ROOF 4x2 TRACTOR UNIT WITH I-SHIFT, VBI-BRAKE, HYDRAULIC KIT, 2x DIESEL TANKS & AIR CONDITIONING!! 460HP, EURO 6!! AUTOMATIC GEARBOX!! VBI ENGINE BRAKE!! P.T.O.!! TIPPER HYDRAULICS!! FULL SPOILER SET ON CABIN!! AIR CONDITIONING!! FRIDGE UNDER BED!! ETC!! NICE, CLEAN & GOOD DRIVING TRACTOR UNIT, READY FOR THE HEAVY TRANSPORT JOBS!! MORE RENAULT 4x2 / 6x2 / 6x4 / 8x2 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE TO GET A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Gearbox: I-SHIFT AUTOMATIC, 12 gears, automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: leaf spring Rear axle: Twin tyres; Differential lock; Max. axle load: 11,500 kg; Tyre tread inner left: 40%; Tyre tread outer left: 40%; Tyre tread inner right: 40%; Tyre tread outer right: 40%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,887 kg Payload: 11,113 kg Gross vehicle weight: 19,000 kg Functional Load compartment volume: 1,000 l Body brand: VOLVO Platform height: 115 cm Condition Technical condition: very good Optical condition: very good Further information Contact Sales Department or Erik Engel for more information.

Condition: like new (used), functionality: fully functional, Height/lumbar/armrest adjustable driver's seat, Nedpfx Aev Nh E Usg Djwf Overcab, Reinforced dual-member suspension (carrying loads), 2-seater front passenger bench seat, Central locking with plip, Digital radio antenna, Uniform spare wheel, Citroën Connect Box, Standard steel wheels, Electric and heated exterior mirrors, Hill start assist, ABS, AFU, ASR and ESP, Driver airbag,

Condition: good (used), machine/vehicle number: S/N 40240 003151, 1 X Loma IQ metal detector system. This machine runs left to right with a modular belt and pneumatic pusher reject into a lockable bin. Technical Specification ⚙️ ✅Serial number - 40240 003151 ✅ Manufacturer - Loma Systems ✅ Year of manufacture - 1998 ✅ Aperture dimensions - 350mm wide x 175mm high (140mm clearance). ✅ Belt dimensions - 2100mm long x 300mm wide (modular belt). ✅ Power - 380V | Phase 3 | 50Hz ✅ Runs left to right. General machine overview 🗒️ Robust and reliable engineering has made Loma a trusted name in quality control. This machine represents a proven and cost-effective solution for businesses needing a dependable layer of metal contamination detection. Key features and benefits 🧰 ❇️ Reliable Performance Built in an era where durability was paramount, this IQ model offers consistent and straightforward metal detection, ensuring product safety and brand protection through a well-established, classic technology. Nwsdpjwk Nq Hefx Ag Dsf ❇️ Cost-Effective Solution A machine of this vintage provides an excellent opportunity to acquire an industrial-grade metal detection system at a fraction of the cost of a new unit. ❇️ Simple Operation Its control system is typically simple and mechanical, making it easy to operate and maintain without the need for complex programming. ❇️ Robust Construction The machine's durable build quality is designed to withstand the rigors of continuous use in various production environments.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Njdpfx Aoymqz Rog Dswf