Used Sick Sick Novamat Kapselanfalter for sale (198)

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Dkedpfx Akom Nntysmsu Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Dkodpfsmpfwdsx Akmeu Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm Dkodswirp Aopfx Akmju 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Dkjdpfx Aox Ug Dskmsu Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Dodswirp Njpfx Akmsku 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Dodswzzzfspfx Akmsku Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Djdpfxjmmuq Ij Akmjku Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Dkodpfx Aowirqaekmou Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Djdpfxewirz Ee Akmsku photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, pressing force: 100 t, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Dodpfofu Nqxsx Akmeku Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Dkjdpewrkctefx Akmeu Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 600 x 780tappet measurements: 240 x 400Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400PK100 Eccentric Press Capacity: 100 tons Strokes per minute: 50 spm (adjustable) Table size: 780 x 600 mm Ram size: 400 x 400 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Accessories: Control system: Siemens S7-1200 Display: Siemens 9’’ screen Stroke path adjustment Min & max stroke rate adjustment Automatic central lubrication Safety PLC: PILZ or SIEMENS Dual-channel safety control cabinet Light curtain: SICK, PILZ, or LEUZE, Cat 4 CE-compliant system 2 pcs. shear plates Dsdpfx Akor I H Dgjmoku Bottom support plate for transport Under-grip protection Pneumatic clutch & brake combination

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  Dsdpev Hin Ejfx Akmeku - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: new, Year of construction: 2025, Fully automatic liquid filling machine with 4 filling heads for filling volumes of different alternative ranges e.g. 50-500ml – customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder – uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: Number of filling heads: 4; max. speed of the machine in neutral: 26 cycles/minute; accuracy: depending on chosen filling range and real filling volume; stainless steel version SS304 – all parts in contact with the filling material are made of SS316; power: 220V, 0.5kW; compressed air: 4-6bar, 0,4m³; machine dimensions LxBxH: 2500x1070x1800mm; weight: 850kg. - Mounting of servo motors instead air cylinders for dosing possible at a surcharge. Machine dimensions of servo version LxWxH: 2500x1300x1900mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dodov Nk Rmopfx Akmoku

Condition: new, Year of construction: 2025, Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml – customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder – uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6; max. speed of the machine in neutral: 35 cycles/minute; accuracy: depending on chosen filling range and real filling volume; stainless steel version SS304 – all parts in contact with the filling material are made of SS316; power: 220V, 0.5kW; compressed air: 4-6bar, 0,4m³; machine dimensions LxBxH: 3500x1350x1800mm; weight: 850kg. - Mounting of servo motors instead air cylinders for dosing possible at a surcharge. Machine dimensions of servo version LxWxH: 3500x1350x1900mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dodpfxov Nk Rts Akmoku Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Dkjdpfx Akjtqwtdjmeu Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Dsdpfx Ajmr Hpcekmoku Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Modular connection module Dkedpfx Aksb N Ulnomju -Type: CDM 420-0105 -Price: per piece -Number: 16x available -Weight: 0.9 kg

Condition: new, Year of construction: 2025, Universal electric swaging machine 1,2 mm Product description: swaging sheet gauge 1,2mm absorber regulation possible price including adjusting rollers' shape Djdpfx Aksb Hqbcomjku fitting motoreducer

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Dodsgta Rcepfx Akmeku Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: used, Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: - Length: approx. 6,000 mm - Width: approx. 2,900 mm - Height: approx. 780 mm - Workpiece length: max. approx. 4,000 mm Dkedpfx Akeztvu Usmou - Workpiece width: max. approx. 900 mm

Condition: used, Bending tool, die, bottom knife, bottom tool, prism tool, beading tool Dedpocnz E Defx Akmsku -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Condition: new, Year of construction: 2025, swaging sheet gauge 1,2mm absorber regulation possible price including adjusting rollers' shape fitting motoreducer possible Dsdpfjbn Ek Nox Akmeku