Used Siemens 6Es5 240-1Aa11 for sale (9,388)

Condition: used, functionality: fully functional, For sale is a complete electrical control system for an industrial rail processing machine, located in Thale. The system was installed and commissioned by ATG Automatisierung GmbH (Gronau). The system consists of multi-section Rittal enclosures with modern Siemens control technology (S7-1500 + PROFINET), Siemens SINAMICS V20 and Hitachi SJ1 frequency inverters, Pilz safety relays, and a Siemens SIMATIC HMI touch panel. Knedpfx Ajzu Ivyokwob

Condition: ready for operation (used), Siemens 6ES5948-3UA21 CPU 948, revision level 4, used, in good condition, 100% functional. Knodpfxsi Edrws Akwsb

Condition: ready for operation (used), Siemens 6ES5513-3LA11 magnetic bubble memory, electronic component, condition grade 5, used, in good condition, 100% functional. Knsdpoi Edp Aefx Akwob

Condition: ready for operation (used), Siemens 6ES5948-3UA21 CPU 948, E-Stand 4, used, minor signs of wear (levers for "Reset" and "Run/Stop" are broken), 100% functional. Knsdpoi Edrzsfx Akwob

Condition: ready for operation (used), Siemens 6ES5457-3AB11 card, operating condition 2, used, in good condition, 100% functional. Kodpfxsi Edpqj Akwonb

Condition: excellent (used), ZVE152724 Swivel Motor Spindle 24000 HSK-T40 Milling spindle for HT45PM Supplier: Siemens Weiss Technical data: Speed: 24,000 rpm Torque: 21.5 Nm (S1) Power: 11 kW (S1) Interface: HSK-T40 Clamping torque: 300 Nm Lubrication: Grease; lifetime lubricated Drawing no.: 180020 Kjdpoxxamfefx Akwenb

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Kjdpfjynwx Ssx Akwjnb Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel -Manufacturer: SIEMENS, Operator Panel OP20/240-8 Kedemch U Rspfx Akwenb -Type:6AV6 542-0BB15-2AX0 -Dimension: 250/235/H45 mm -Weight: 1.1 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type: 6AV3520-1EL00 Knjdohzzcvspfx Akweb -Dimension: 310/220/H135 mm -Weight: 2.8 kg

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: Kedpfxjzbufio Akwenb • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Condition: ready for operation (used), Siemens 6ES5902-3SA12 central processing unit, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Knjdpji Edq Iofx Akwsb

Condition: excellent (used), Year of construction: 2003, x-path 350 mm y-path 240 mm z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: Knjdpou Rdpiofx Akwob - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor Knodpfxeyyqnlo Akwob -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: used, Several control cabinets with frequency inverters ranging from 37 kW to 45 kW are for sale, in various designs and from different manufacturers. Details: Item No. Sch 6 Control cabinet with 37 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Knjdpfx Akeztl N Ijwsb Item No. Sch 15 Control cabinet with 37 kW Siemens S5 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S5 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 45 Control cabinet with 45 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 45 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No.: Sch 47 Siemens S5 control cabinet, Siemens Operator Panel OP393-III ✔️ Ideal as a distribution cabinet or for individual configuration ✔️ With control elements (buttons, emergency stop, display) ✔️ Robust industrial design ✔️ Perfect for modification, expansion, or replacement With Siemens S5 controllers With star-delta circuit for 45 kW With Siemens Operator Panel OP393-III Stock: 1 Available: immediately Condition: Used, good condition (see pictures). Electrical function not tested (or to be adapted). Scope of delivery: Control cabinet as shown Control elements / installed components

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 Knjdpfx Akox Iputewjb -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: repair required (used), Year of construction: 1995, For sale: a Siemens conveyor belt in good condition with two separate tracks. Chain belts are also available and are included. The conveyor belt is approx. 3 metres long and can be rolled up. Kjdjzh Efljpfx Akwjnb

Condition: used, functionality: fully functional, For sale are several spindle motors and servo motors from the manufacturers Mitsubishi, Siemens, and Mazak. The technical condition of the motors has been checked, and they are ready for immediate use. MITSUBISHI: • Mitsubishi Spindle Motor SJ-4-VKS15-13ZM (2004) • Mitsubishi Spindle Motor SJ-4-KS15-U62M (2000) • Mitsubishi Servo Motor HC-H153S-A47 (2004) • Mitsubishi Servo Motor HC-SF52K-S1 (2x available) • Mitsubishi Servo Motor HC-SF52BK-S2 • Mitsubishi Servo Motor HC-H203BS (2004) • Mitsubishi Servo Motor HC153S-SZ (2x available) SIEMENS: • 3 Permanent Magnet Motors 1FT5064-0AF71-2-Z(F) (2x available) • 3 Permanent Magnet Motors 1FT5074-0AK71-2(F) The spindle motors are sold on an exchange basis. This means you receive a refurbished, tested spindle motor from us, while we receive your defective unit in return. As a result, your production can continue without major downtime and unplanned outages are minimized. Alternatively, you can commission a repair only. We take care of the entire process: we disassemble the spindle motor, repair or refurbish it in our workshop, and reinstall it afterwards. So you have a single point of contact for the entire process – from disassembly to commissioning, everything from one source! INFORMATION: We have a wide range of drive and servo motors for CNC machines and other machinery in stock, and we also offer repair services for them. Please send us your inquiry – we will promptly check availability for your machine. If you have any further questions, please feel free to contact us at any time. Knodpfx Aexwi Ucekwjb Our service promise: For us, quality, expertise, and customer satisfaction come first. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability assumed.

Condition: ready for operation (used), Siemens SINAMICS 6SL3111-4VE21-6EC1 Combi Power Module, SN: ZVPG4370136, used, in good condition, 100% functional. Delivery as shown in the photos. Professionally fully overhauled and tested with a 12-month warranty. 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Kodpfx Aez Acquskwjnb

Condition: refurbished (used), Year of construction: 1995, operating hours: 900 h, overall weight: 100,000 kg, torque: 500,000 Nm, 2 Flender helical gear units with drive motors and couplings Description: We sell two Flender helical gear units (double shaft drive) if desired with drive motors and couplings (option) Kodpstr Dywofx Akwsnb Condition: little used, completely overhauled and preserved Lower and upper part in 2 containers Technical data: Total torque: 500,000 Nm Permissible torque drive journal: 333,333 Nm Input speed: 1500 rpm Output speed. 7.5 rpm Rolling bearing: SKF Double-tooth clutch: Flender Zapex Field of application of spur gear units: Container cranes, overhead cranes, slewing gear, casting cranes, birch presses, etc New price of the package: well over €700,000 VAT can be shown, package price

Condition: ready for operation (used), Siemens Simatic IPC627C / 6ES7647-6CB00-1AA0 industrial box PC, serial number: SVPC7851972, used, in good condition, fully functional, scope of delivery as shown in photos. Ksdpfx Aez Acmvskwonb

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 400 V, overall weight: 1,530 kg, SIEMENS 250 kW, IE4 efficiency class Kodpfxozr Ihwe Akwsnb 12-month warranty

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Knedpfxezd Agrj Akweb Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: used, Year of construction: 2023, 23 electric motors from various manufacturers are offered. 1) 4 × Innomotics 1AV3104A, power: 3kW, year of manufacture: 2024. 2) Hoyer HMA3-132S1-2, power: 5.5kW, year of manufacture: 2021. 3) 2 × Innomotics 1CV3073A, power: 0.55kW, year of manufacture: 2024. 4) WEG W22 02P71, power: 0.55kW, year of manufacture: 2023. 5) 4 × Siemens 1AV3205B, power: 30kW, year of manufacture: 2020. 6) WEG W22 160L-04, power: 15kW, year of manufacture: 2021. 7) FOA AC motors, power: 2.2kW. 8) 4 × WEG W22 100L-04, power: 2.2kW, year of manufacture: 2022. 9) VEM K21R 112 M 6-4 L H TPM140, power: 1/3kW, year of manufacture: 2022. 10) 2 × CEM TCE 80MCY 4 V1, power: 0.55kW. 11) WEG W22 06P90S, power: 0.75kW, year of manufacture: 2024. 12) WEG W22 160M-06, power: 7.5kW. Inspection possible by arrangement. Knodpfx Aozvghqokwob

Condition: new, Year of construction: 2024, INNOMOTICS / Siemens SIMOTICS HV C – 1,160 kW – 690 V – New in Original Crate NEW / UNUSED Brand new Siemens / INNOMOTICS industrial electric motor, still in its original export packaging. The motor has never been installed or used and is supplied in the original wooden transport crate. Technical details: Manufacturer: Siemens / INNOMOTICS Product: High Voltage Electric Motor Siemens Article No.: 1NA1508-8BC00-0CA0-Z Power: 1160 kW Voltage: 690 V ±5% Frequency: 50 Hz ±2% Motor weight: approx. 7,800 kg Condition: New / Unused Year of packaging: 2024 Quantity available: 1 piece Packaging details: Original Siemens export wooden crate Net weight: 7,800 kg Knedpez A Sz Tsfx Akwob Gross weight: 8,588 kg Crate dimensions: approx. 3694 × 2144 × 1834 mm The motor is available immediately from stock. Ideal for heavy industrial applications requiring a high-power Siemens/INNOMOTICS electric motor. Condition: New surplus / unused Availability: Immediate

Condition: ready for operation (used), Siemens SIMODRIVE 6SN1145-1BA01-0BA1, serial number: T-N42036922, has been completely and professionally overhauled and tested, and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. Knjdpfxez Ax Dds Akwsb