Used Steinert Perman-Überbandmagnetscheider for sale (1,041)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 617 kg, maximum load weight: 2,083 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, rear tipper, electric operation NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700Kg Payload: 2083Kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on the wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Automatic jockey wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangle reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated loading ramps 2800Kg -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on tilted vehicle -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Prodpfx Anozxrvxoyjb Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustrative purposes only and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Pedozii Awspfx Anyjrb Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, power: 129 kW (175.39 HP), overall weight: 7,490 kg, fuel type: diesel, color: orange, gearing type: mechanical, Year of construction: 2026, total width: 1,995 mm, total height: 2,195 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 7C18 Roll-off Dump Truck, latest generation Wheelbase 2800mm, including winter package * 3L Turbo Diesel engine, 129 kW / 175 hp, EURO 6 * Start/Stop automatic * 5-speed manual transmission * Wheelbase 2800mm, short * Rear axle with twin tires and automatic differential lock * Traction tires 205/75 R16C * 4-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake force distribution * Ball-type trailer coupling, 3500kg 3-year warranty on the base vehicle from the date of initial registration or up to 100,000 km. * Electric windows * Central locking with remote control * Immobilizer * Driver airbag * 2 DIN radio with Apple CarPlay and reversing camera Pjdpfszkdibox Anyorb * Tachograph with digital technology * Digital tachograph, EC control unit * Double passenger seat * Driver's air suspension seat with armrest * Fog lights with automatic daytime running lights * Tilting cab * Lane keeping assistant * Emergency braking assistant * Turning assistant * Automatic climate control * LED work lights, rear * LED reversing lights * 90-degree hook height * Shallow lifting angle * Hydraulic container locking system * Incl. remote control * Towing capacity 5000kg * Mechanical hook lock * Load holding valves on all hydraulic cylinders * Emergency stop function * Body, CE-certified * Drive via vehicle hydraulics * For roll-off containers of: 3200mm length Including Hilltip winter package: Snowplow Hilltip 2400SP including LED auxiliary headlights, Hilltip Ice Striker 1600A permanently mounted on roll-off frame, including control panel and work lights Optional: Wax preservation * LED rotating beacon * Snow chains * Work lights More vehicles of the Fuso Canter and Multicar brand, as well as various container sizes, can be found at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors Our general terms and conditions apply.

Condition: new, power: 129 kW (175.39 HP), overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 7C18 roll-off tipper with municipal hydraulics and Fiedler winter package. Predjy Sc Ubjpfx Anyjb 3L turbo diesel engine, 129 kW / 175 hp, EURO 6d Start/Stop automatic 5-speed manual transmission Wheelbase 2800mm Rear axle with twin tires and automatic differential lock Traction tires 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake force distribution Ball-head trailer coupling 3-year warranty on the base vehicle from the date of initial registration or up to 100,000 km. Standard cab with the following equipment: Electric windows Electrically adjustable and heated mirrors Central locking with remote control Immobilizer Adjustable steering wheel and steering column Driver airbag Double DIN radio with hands-free system and reversing camera Tachograph with digital technology EC speed recorder Storage compartment above the windshield & behind the seat Passenger double seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane keeping assist Brake assist Turning assistant Automatic climate control 900mm hook height Low lifting angle Hydraulic container locking Control panel in the driver's cab Remote control Towing capacity 5000kg Mechanical hook locking Load holding valves on all hydraulic cylinders Emergency stop function Superstructure CE-tested Drive via vehicle hydraulics For roll-off containers with a length of 3200mm. Suitable containers in stock!!!! Additional equipment: * M&S tires * Dimmable LED auxiliary headlights with integrated turn signals (heated) * LED work lights at the rear * Warning markings red - white, 1 set = 4 pieces * Engine-mounted two-circuit universal hydraulic system * 2 double-acting control functions at the front (up/down, left/right, floating position) and 1 working circuit at the rear, * Hydraulic front lifting device with quick-change plate, Multicar system * Wax preservation including Fiedler winter package: spring flap plow FRS 2420, plow width 2.40m (also available as * 2.60m), working width with max. offset 2.20m, 2-cylinder version, curb guards, running rollers, LED plow lighting, warning flags, safety valve set for 2-cylinder version, leak oil line at the front * Spreader Fiedler FFF 2000 permanently mounted on roll-off frame, 2m³ capacity * Control panel in the driver's cab, speed-dependent, etc. * Various cab variants and wheelbases with higher payloads available in the short term. This also makes it possible to realize larger container sizes. Large-volume containers with rear wing doors on the right/left and traversable versions with a hinged rear flap, platform bodies with folding side panels and lattice structures are available at an extra charge. You can find more vehicles of the Fuso Canter and Multicar brands as well as various container sizes at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors Our general terms and conditions apply.

Condition: used, mileage: 104,050 km, power: 75 kW (101.97 HP), first registration: 12/1999, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, number of seats: 5, total length: 4,931 mm, total height: 2,170 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, parking heater, Internal vehicle number: 6758BX ----Why autonext? Over 400 vehicles (cars and commercial vehicles) immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options. The entire vehicle range is available on autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----The vehicle has some rust spots. You can view these on YouTube. Here is the link: We would be happy to send you more pictures. Please contact us! Prsdpoyzvwzefx Anyob MOT valid until 03/2027 1st owner (government vehicle) German vehicle Non-smoking vehicle New front brake pads New all-weather tires, front and rear All-wheel drive "Syncro" 4x4 Number of seats: 5 Air conditioning Auxiliary heating Roof window with opening/locking mechanism Folding dining table in the passenger compartment Spare wheel including spare wheel holder Shelving system in the cargo area Suitable for conversion into a motorhome/camper ---- Special features: * Front brake discs 15" (280 mm x 24 mm) * Internally ventilated brake discs * Air conditioning * Air conditioning (variants) * Engine 2.5 L - 75 kW TDI CAT (ACV) * Hydraulic clutch operation * 2nd battery * Airbag driver/passenger side * Anti-lock braking system (ABS) * Exterior mirrors electrically adjustable and heated * Battery 72 Ah * Rear indicator lights (roof) * Floor covering in the cargo/passenger compartment: rubber * Internally ventilated brake discs * Electric windows * Generator 120 A * Rear window wiper * Hydraulic clutch operation * Make-up mirror, left * Make-up mirror, right * Fog lights * Tires 205/65 R15C 102/100 T * Spare wheel in driving condition * Heated windshield washer nozzles * Seats in the driver's cab: lumbar support for the driver's seat Standard equipment: Drive type: permanent all-wheel drive, exterior mirror, aspherical, left, exterior mirror, convex, right, floor covering in the driver's cab: rubber, rear brake discs 15" (280 mm x 12 mm), tachometer, chassis 15", window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, fixed caliper disc brake, generator: Bosch, transmission 5-speed, heated rear window, body/superstructure: standard station wagon, body version: normal roof, refrigerant R 134 A, headlight range adjustment, without long-life service, wheelbase 2920 mm short, headlights H4, sliding door cargo/passenger compartment right, power steering, seat cover/upholstery: fabric, immobilizer (electronic). ----MOT/emission test can be renewed upon request. ----Warranty and "TÜV Profi Check" are of course available with us! We will also be happy to take your vehicle in trade! We will also create an individual financing or leasing offer for you! Without a down payment, redeemable at any time and with special redemption options. Please direct your requests to our sales team, we will be happy to advise you. ----Arrange an appointment for a test drive and be convinced by the quality of our vehicles. Appointment arrangements: Mon-Fri from 08:30 - 18:00, Sat from 09:30 - 13:30 ----Visit us also on [website address] We look forward to your visit! ----Errors and changes excepted. The equipment offered on the internet is not part of the contract. The equipment mu

Condition: used, Year of construction: 2026, functionality: fully functional, load capacity: 1,500 kg, construction width: 1,200 mm, Rotating device Prsdpfx Anozhp Dfjyob Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotating device, 205 degrees, for complete emptying of all containers, load capacity 1500 kg, support arm permanently mounted/foldable, incl. hoses & quick couplings, available from stock.

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights Psdpfxszhd Nco Anyorb * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: used, mileage: 22,173 km, power: 260 kW (353.50 HP), first registration: 11/2022, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2028, color: green, gearing type: semi-automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, parking heater, Internal vehicle number: G190366 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz Unimog U435 4x4 tipper with tire pressure control system German vehicle with permanent all-wheel drive, tire pressure control system "TireControl", extensive work hydraulics and tipper body. Thanks to the work group, front mounting plate, auxiliary drive and numerous hydraulic connections, it can be used in a variety of ways as a utility and municipal vehicle. Vehicle data: * Vehicle number: G190366 * Vehicle condition: Used * Category: Tipper/equipment carrier * First registration: 11/2022 * Year of manufacture: 2022 * Mileage: 22,173 km * Fuel type: Diesel * Engine: Mercedes-Benz OM 936, 6-cylinder * Displacement: 7,698 cm³ * Power: 260 kW (354 hp) * Torque: approx. 1,380 Nm * Transmission: Semi-automatic * Auxiliary gearbox with work group * Emission class: Euro 6 * Environmental badge: 4 (Green) * Wheel formula: 4x4 * Axles: 2 * Wheelbase: 3,150 mm * Permissible total weight: 14,000 kg * Unladen weight: 7,451 kg * Payload: 6,549 kg * Color: Green * Left-hand drive * MOT: new Tipper and platform: Psdpfx Ajzwy N Donyorb * Tipper body * Internal dimensions of the platform: approx. 2,385 × 2,075 × 400 mm * Hydraulic tipping cylinder * Hydraulics for tipping mechanism * Tipping connection for trailer, single-acting, rear * Warning light for telescopic cylinder * Quick-change system for the platform * Platform subframe for external superstructures * Rear mounting brackets * Low-set rear crossmember for trailer couplings All-wheel drive and chassis technology: * Permanent all-wheel drive * Differential lock on the front axle * Tire pressure control system TireControl * Wheel-side components for TireControl * Work group for slow working speeds * High Performance Engine Brake * Transmission oil cooler * Transmission oil filter * Haldex air disc brake system * ABS * Two-line trailer brake * Tires: 365/85 R20 * Disc wheels 10.00 V-20 Work hydraulics: * VarioPower power hydraulics * Load-sensing hydraulics * Four hydraulic connections at the rear for hydraulic unit 1 and 2 * Rear pressure line for the second hydraulic circuit * Separate return line at the rear * Hydraulic quick couplings according to ISO 7241-1 A/ISO 5675 * Preparation for snowplow operation * Separate continuous power connection * Engine auxiliary drive to the rear with flange * Switchable auxiliary drive with universal joint flange * Preparation for retrofitting a front PTO shaft * PTO shaft speed limiter Mounting options: * Front mounting plate DIN 76060, Type B, Size 3 * Preparation for front PTO shaft * Rear mounting brackets * Quick-change system for the platform * Extensive hydraulic connections at the front and rear * Suitable for various municipal, agricultural and technical attachments Cab and comfort: * Air conditioning * Auxiliary heater * Air-suspended comfort driver's seat * Seat heating * Active seat ventilation * Reversing camera * Additional camera for attachments * Monitor for camera system * 12.7 cm (5 inch) combination instrument with video function * Digital radio with CD, USB and Bluetooth * Sliding rear window left * Transparent outer sun visor * Activated carbon filter * Additional steering column switch * Universal holder for control panel * Noise encapsulation / special package Electrical system and lighting: * ABS trailer socket 24 V * Additional trailer socket 12 V, 13-pin * Socket at the front 24 V, 7-pin * S

Condition: used, Year of construction: 1980, machine/vehicle number: 18798, Item No. 25046 Predezxdhaepfx Anysb High-performance pillar drill Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - Continuously variable drill spindle speeds - Adjustable – Stage 1: 65 – 240 rpm - 130 – 480 rpm - Stage 2: 240 – 875 rpm - 480 – 1750 rpm - Overhang: 290 mm - Max. distance table – drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Table with reversible function and permanently mounted machine vise - Table height adjustment via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement: approx. W 660 x H 1900 x D 700 mm - Weight: approx. 300 kg - Includes: - Quick-change drill chuck 1-13 mm

Condition: new, functionality: fully functional, empty load weight: 557 kg, maximum load weight: 2,143 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,010 mm, loading space width: 2,020 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, Saris AT 401 202 2700 2 K NEW VEHICLE NEW SERIES Internal dimensions: 401cm x 202cm Total weight: 2700kg Payload: 2143kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350kg axles and brakes with automatic reversing function Low chassis Aluminum running boards Fully welded, hot-dip galvanized steel frame Tilting loading platform Integrated steel loading ramps Automatic support wheel with 400kg support load Numerous lashing points along the entire length Reinforced 10" C tires with steel valve M+S tires Pedpfjzl A Ixsx Anyerb 13-pin connector Side marker lights at the front Rear lights with reversing light, NSL (number plate light) and triangular reflectors Winch with brake and mounting bracket 2x wheel chocks 2x wheel stops OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Aluminum tread plate between running boards -Anti-sway coupling -2 wheel stops for perforated steel running boards -Wheel stops across the entire width Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will also find a wide range of rental trailers with us. Visit us online or come directly to our location.

Condition: used, mileage: 133,344 km, power: 100 kW (135.96 HP), first registration: 01/2004, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency / Federal Police. Configured as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for speed adjustment. The windshield will be replaced with real glass before sale. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear part of the vehicle can remain. Furthermore, before the sale, the bases and deflectors of the former roof-mounted rotating lights will be removed. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, for the sale, we will remove the rear wooden cabinets. This also creates space for a camper van conversion. Technically, this Vario is in good condition and does not require any immediate repairs – it has been regularly serviced according to the service schedule. All components, such as the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heater are functioning and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convector vents in the passenger compartment for draft-free heating. Maximum speed Vmax according to the vehicle registration document: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – Podpfxozthrlj Anyjrb with adjustable backrests and armrests, and the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional charge of €750, we can perform a technical modification to convert it into a camper van, which would involve removing some seats. Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale reserved.

Condition: new, Indramat MDD0718-N-030-N2SD-095PA1 permanent magnet motor without encoder, serial number 18968, unused, 100% functional, scope of delivery as shown in the photos. Pjdpfxoztuk Ij Anyjrb

Condition: ready for operation (used), Rexroth Indramat MDD071C-N-060-N2S-095GA0 permanent magnet motor without encoder, serial number 07470, used, in good condition, 100% functional, scope of delivery as shown in the photos. Predpfx Anjztullsyjb

Condition: new, power: 18.2 kW (24.75 HP), overall weight: 2,150 kg, lifting power: 1,200 kg/m, Equipment: pallet forks, This advertisement is for informational purposes only and does not constitute a legally binding offer. KINGWAY LANDER 812R – Professional Farm Loader | 1,200 kg Lifting Capacity | Kubota Engine The modern KINGWAY LANDER 812R is a compact and powerful farm loader for professional use in agriculture, construction, gardening and landscaping, as well as on equestrian farms and in municipal operations. Equipped with the proven Kubota D1105 diesel engine, hydrostatic transmission, and permanent all-wheel drive, the LANDER 812R impresses with its high reliability, ease of operation, and low running costs. Thanks to its compact dimensions, the machine is ideally suited for work in confined spaces without compromising on performance. With a lifting capacity of up to 1,200 kg, a lifting height of 2.60 m, and a standard hydraulic quick coupler and auxiliary hydraulics, the LANDER 812R is a versatile helper for daily professional use. Standard Equipment Kubota D1105 diesel engine (Euro 5) Hydrostatic transmission All-wheel drive 2-speed gearbox Hydraulic quick coupler Auxiliary hydraulics Pressureless return flow Mechanical float position Hydraulic articulated steering Electric direction control Joystick operation Digital display Adjustable steering column Comfort seat with side support Protective canopy Side-folding safety bar Work lights front and rear Rotating beacon Reversing alarm Road lighting according to §21 StVZO Trailer coupling as standard Electric main switch Wide tires Technical Data Engine Kubota D1105 Water-cooled 4-cylinder diesel engine Power: 18.2 kW (24.7 hp) Emissions standard: Euro 5 Transmission Hydrostatic transmission All-wheel drive 2-speed gearbox Maximum speed: 12 km/h Performance Data Lifting capacity: 1,200 kg Maximum lifting height: 2,600 mm Maximum tipping height: 1,920 mm Tipping reach: 600 mm Gradeability: 21% Dimensions Length: 3,600 mm Width: 1,200 mm Height: 2,170 mm Unladen weight: 2150 kg (with protective canopy) Product Advantages Original Kubota diesel engine Hydrostatic transmission Very compact design Lifting capacity up to 1,200 kg Lifting height 2.60 m Hydraulic quick coupler as standard Auxiliary hydraulics as standard Low operating costs Easy maintenance High maneuverability Ideal for tight working areas Robust steel construction Comfortable operation via joystick Application Areas Agriculture Equestrian farms Gardening and landscaping Construction Municipal operations Warehouse and handling operations Psdpszl R D Ujfx Anysrb Industry Recycling Winter service Private and commercial use Warranty and Service 12 months manufacturer's warranty Warranty extension possible up to 3 years Our own mobile service team throughout Germany Spare parts directly from the warehouse in Germany Professional workshop and repair service Scope of Supply KINGWAY LANDER 812R Standard bucket Pallet fork Operating manual Service documents PRICE €20,500 Net €24,395 Gross KINGWAY Deutschland e.K. Untergambach 10 84098 Hohenthann

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer Prsdpfx Anezpxx Ijyjb fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Predpezx D A Dsfx Anyjb Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: new, mileage: 2 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation LOOKING FOR A RELIABLE 6x6 TRANSPORT SOLUTION? If your operations take you beyond paved roads, you need a reliable 6x6 truck that keeps performing where conventional transport vehicles stop. The Mercedes-Benz Arocs 3340A 6x6 has been developed for demanding logistics, remote operations and heavy-duty off-road transport where reliability, flexibility and all-terrain capability are essential. AT A GLANCE ✔ Factory-New Mercedes-Benz Arocs 3340A ✔ Permanent 6x6 All-Wheel Drive ✔ Mercedes-Benz OM460 EURO-3 Engine ✔ 394 HP | 1,900 Nm Torque ✔ Mercedes PowerShift 3 Automatic ✔ Multi-Purpose Cargo Body ✔ ISO 20 ft Container Twist Locks ✔ Folding Side Panels ✔ Heavy-Duty Off-Road Chassis ✔ Ready for Immediate Worldwide Export Why This 6x6 Truck Configuration? Projects change, transport requirements change, your heavy-duty truck should be able to adapt! This versatile cargo platform has been designed to transport equipment, palletised goods, containerised cargo and organised work teams using one robust 6x6 transport vehicle. The modular cargo body with removable side panels, foldable seating, integrated tie-down points and ISO container twist locks offers exceptional flexibility for companies operating in remote environments. Ready For Challenging Off-Road Environments From mining projects and construction sites to energy developments and infrastructure works, demanding environments require dependable heavy-duty transport equipment. The permanent 6x6 drivetrain, reinforced suspension, planetary rear axles and off-road driving programme provide outstanding traction on sand, mud, gravel and uneven terrain. A factory-installed cooling package for hot climates, construction-site air filtration and additional dust protection help maintain reliable performance in harsh operating conditions. Why Buy from Schaften Automotive? Since 1977, Schaften Automotive has specialised in supplying premium commercial vehicles and heavy-duty trucks from leading European manufacturers. With more than 150 vehicles in stock, we offer immediate availability for customers worldwide. From export documentation and international truck transport to custom-built vehicle bodies assembled according to Dutch quality standards, our experienced in-house team manages the complete process—providing one reliable partner from purchase to delivery. Built Around Productivity Reliable heavy-duty transport is about more than engine power. It is about keeping people, equipment and materials moving safely and efficiently every day. The Mercedes-Benz Arocs 3340A 6x6 combines proven German truck engineering with a versatile cargo platform, allowing operators to adapt quickly to changing project requirements while minimising downtime. Perfect For Mining Operations Infrastructure Projects Construction Companies Utility Contractors Oil & Gas Support Humanitarian Organisations Podpsy R Ud Eefx Anyerb Remote Workforce Logistics Equipment Transport Container Transport Site Support Operations Technical Overview Vehicle: Mercedes-Benz Arocs 3340A 6x6 Engine: Mercedes-Benz OM460 12.8L EURO-3 Power: 394 HP and 1,900...

Condition: new, Year of construction: 2025, Auger Filler with integrated load cell for permanent weight feedback during the filling process. Stand-alone version for semi-automatic filling. Suitable for dosing and filling powdery products into bags, cans, jars, or other containers. PLC controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 10-5000g (change of dosing auger necessary); accuracy (depending on product and total weight): 1-100g max. ±2%, 100-500g max. ±1%, 500g-1000g max. ±0.5%, 1000-5000g max. ±0.2%; max. speed of the machine in neutral: 12 cycles/minute; hopper volume: 50L (standard), 75L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.4kW; compressed air and compressed air consumption: 0.6MPa, 0.1m³/min; machine dimensions: L1200xW900xH2200mm; weight: 260kg. Predpfx Aow D En Uonyob

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Prsdpfx Aneyr Aiwoyeb Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions Prjdpfsw U U Svjx Anyjb

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Psdpfed Dy Ugsx Anyjrb Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2025, Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute; power: 220V, 0.95kW; machine dimensions: L800xW790xH1900mm; weight: 130kg. Psdpfx Asv Nk D Tenysrb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2013, axle configuration: 4x4, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 15.950 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.560 cm Dimensions of cargo space: 1201 x 238 x 271 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1610 m Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA260PX Year of build: 2013 Condition: Used Predpfev Tiqmsx Anyeb Data: Max. working height: 25,60 m Platform height: 23,60 m Max. reach: 16,10 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,80 x 0,74 m Swivel range: 360° Max. climbing capacity: 40% Total dimensions LxWxH: 12,01 x 2,38 x 2,71 m Movable up to working height: 25,60 m Wheel pressure max.: 64,5 kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 15.950 kg Special features: Rotating work basket, basket arm/vertical rotation angle 140°, all-wheel drive, differential lock, permanently installed soot filter. Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, CORMAK OS2400 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines strong suction power with a high airflow rate, while the sound-insulated fan chamber ensures quiet and smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade design. Automatic Filter Cleaning – Consistent Performance The CORMAK OS2400 is also designed with ease of operation and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly “pulsed” to remove accumulated contaminants without the need for frequent manual intervention. The effect is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is critical, as any unplanned downtime or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction power to be adjusted to actual working requirements: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-focused adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Solid Construction and Mobility The OS2400 is designed for everyday use, which is why great emphasis has been placed on high build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently relocated, operates for many hours a day, and must withstand intensive use. Its mobility makes it easy to use the extractor at multiple workstations without investing in a permanent installation throughout the entire facility. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied projects. Wide Range of Applications In practice, the OS2400 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes that produce dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution contributes to employee health, work comfort, and the perception of the workplace as modern and safe. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 Prjdpfx Aoygucljnyob OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements.

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Prsdpfx Ansz Ahursyeb Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.