Used Steinmeyer Ball Screw for sale (7,496)

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Ibedozh Hwiepfx Anmsa Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Exhibit available immediately: Ibsdsdrc Txjpfx Anmoa New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min Iedodtm Ndjpfx Anmjba at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. Iodpfxjzrnc Is Anmeba User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: good (used), Year of construction: 2010, Screw compressor COMPAIR L15-10, serial number CD10001916004, pressure 10 bar, output 15 kW, year of manufacture 2010. Pressure vessel OKS, serial number 486069, volume 1,500 liters, year of manufacture 2001. Refrigerant dryer ALUP ADQ 180 (E6), serial number ITJ912677, year of manufacture 2025. Iedpfx Aszqcmxjnmeba

Condition: new, functionality: fully functional, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 224348 - UPC Code: 633955604346 - General Industry - Application: Waterborne, Solvent-based, High Solids, Stains, Varnish - Body: Stainless Steel - Maximum Flow Rate: 11.36 L/min at 60 cycles - Maximum Working Pressure: 25 bar Ibodpewqfgdjfx Anmsa - Maximum Air Inlet Pressure: 12.41 bar - Pressure Ratio: 10:1 - Pneumatic Piston Pump - Maximum Operating Temperature: 82°C - New Product - 1-Year Warranty (Except electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT NOT included - VAT INCLUDED. Companies registered with the VIES or with a TAX ID can request VAT-free purchases. - Customs and tariff expenses are the responsibility of the buyer in case of import (Incoterm: DAP)

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Iodpfxeku A H Uj Anmoba

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Isdpfxjgchbmj Anmoba

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Iedpfx Asdcmdlsnmoba Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90 90 kW 7.50 bar 14 m3/min Year of manufacture: 2012 Operating hours: 5735 Ibodpfx Aezqvvajnmoa

Condition: used, Year of construction: 2017, power: 55 kW (74.78 HP), pressure (max.): 8.5 bar, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, We offer this used Kaeser CSD 105 screw compressor, manufactured in 2017. Compressor type: CSD 105 Material number: CSD.4C Serial number: 1328 Year of manufacture: 2017 Rated power: 55.0 kW Motor speed: 2975 rpm Maximum working pressure: 8.5 bar Ambient temperature range: -10°C to 45°C Option: K1 C3 11,000 operating hours Iodpjzrgmxofx Anmsba If you have any further questions or require more information, please send us a message or call us. We also have used BS51 and BS61 compressors, a TD61 dryer, and a 2000L pressure vessel in stock. Prices are negotiable. You can also purchase a complete set of machines at a favorable price. The machines are used and do not come with a warranty.

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated 75 kW 12.75 bar 15.50 m3/min Year of manufacture: 2018 Ibsdpjzp Urwsfx Anmja Operating hours: 43,309

Condition: used, Year of construction: 2019, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Ibsdpfjzdqz Dex Anmsa Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no Ibsdszq An Nepfx Anmoa DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 Iedpfx Anezq Alusmjba HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 S/N AIF072890 YEAR 2001 POWER (kW) 167 CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) Ibjdpfxszq Afuo Anmea FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 3 NEW/USED USED

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm -Bar capacity 34mm -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center -Work light -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted. Ibodpfszpg Uqox Anmja

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor Isdpfjv Uqlzex Anmeba With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 1.3 m³/min at 1.6 MPa Integrated pressure vessel approx. 330 l

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Ibsdpfx Anjzpxhiemsa Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2018, 2 spiral conveyors, ambaflex, – used – Price per unit ex works (net): only €8,500 for self-disassembly! Ibodpfjzpf Ntox Anmea Manufacturer: ambaflex Year of manufacture: 2018 Type: SPIRALVEYOR SV Serial number: e.g.: 26811-01 The respective conveying height will be provided later. Diameter and width of the link chains will be provided later! Condition: good Available: from approximately August 2026, or by agreement Location: Erfurt area Two spiral conveyors were installed for the conveying system to transport the cartons from the goods receiving area to the 1st floor and to return them to the ground floor after the packing process. One spiral conveyor is used for the vertical transport of cartons and containers. The spiral conveyor can be used both for the vertical transport of the conveyed goods to another level and as a buffer within the system.

Condition: used, Used transfer troughs, spirals, various sheet metal parts, and funnels for agriculture and viticulture Isdpfxszqmhme Anmjba available at a low price, length available upon request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 14091807829900901, overall weight: 350 kg, total length: 800 mm, total width: 700 mm, total height: 1,200 mm, power: 22 kW (29.91 HP), pressure (min.): 7.5 bar, pressure (max.): 13 bar, Equipment: type plate available, Screw compressor, 22 kW Operating pressure: 7.5 - 13 bar 400 V / 3-phase / 50 Hz Made in Germany / CE Iodezqr Edspfx Anmeba

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) Ibsdpfozphf Dox Anmoa The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: excellent (used), Year of construction: 2012, operating hours: 36,734 h, Atlas Copco GA55FF screw compressor Integrated dryer Iedpozphrwjfx Anmoba 55 kW 9.80 bar 8.87 m3/min Year of manufacture: 2012 Operating hours: 36,734

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm Ibsdjzpba Ujpfx Anmoa -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Errors and omissions excepted.