Used Thin-Cut Frame Saw for sale (23,908)

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Ndjdpfx Aashw Ng Io Roa Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Njdpfx Aod Hx Uqoa Rsda Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1070x1200 mm Nsdpfx Ajvz Hzxja Reda Weight 1150 kg Total power requirement 10 kw

Condition: new, Year of construction: 2026, New Optimizing saw SALVACUT 5000 by SALVAMAC Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. Nedpfx Aaon E Sl Ro Roda From an idea of Salvador Christian.

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner Njdpfx Aoxx Hwwsa Rjda 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm - V. 380/50 - S/N 99T318 Ndedsqmpnaepfx Aa Roa - Year 1999

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, cutting width (max.): 610 mm, saw blade diameter: 600 mm, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement Ndsdpfox Ekmrox Aa Roa - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm - Weight: 600 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 96T233, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - Tilting blades 45° - N. 2 motors 1.1 kw Njdpfx Ajqmpl Aoa Reda - Blade diam. 330 mm - V. 380/50 - S/N 96T233 - Year 1996

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Weight 890 kg Nodpfx Aasbubuko Reda

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 000929, saw blade diameter: 350 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC TYPE TD1200 CA - CE RULES - N.2 motors 2 hp Ndsdsx Rvmbopfx Aa Rsa - Blade diam. 350 mm - Min/max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Complete with manual and CE declaration - With automatic loader - Serial no. 000929 - Year: 2001 - CE rules

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Nodpfeu D Udwsx Aa Rjda Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English

Condition: excellent (used), For sale is an industrial crosscut saw from the renowned German company Paul Maschinenfabrik GmbH & Co. Model 15 A0 is a reliable and robust machine, perfect for any sawmill, carpentry workshop, or pallet production facility, guaranteeing speed, precision, and cutting safety. ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Paul Maschinenfabrik GmbH & Co, Dürmentingen (Germany) Type / Model: 15 A0 Machine Number (Masch. Nr.): 8621628 Date of Manufacture (Liefertag): 17.03.1986 Motor Power: 3 kW (according to the nameplate, the machine's connected power ranges from 3 kW to 4.5 kW) Supply Voltage: 380 V / 50 Hz (20-25A fuse) Ndodpozp Af Sofx Aa Rja Spindle Diameter: 30 mm Dimensions of work tables (included): Left feed table: 240 cm Right discharge table: 180 cm Maximum cutting width: Up to 450 mm - 500 mm, depending on the blade used and the final machine configuration. 🛠️ ADVANTAGES AND MACHINE FEATURES: Hydraulic drive: The saw blade advances hydraulically with the possibility of smooth adjustment, which significantly facilitates operation, ensuring smooth performance and reducing operator fatigue. Integrated clamping and safety: The hydraulic clamping system for the material being cut also functions as a blade guard, guaranteeing the highest safety standards at the workstation. Comfort and efficiency: Very long roller tables allow for convenient handling of even exceptionally long timbers or boards. Solid German construction: Durable construction (Made in Germany) ensuring stability, complete absence of vibrations, and very long service life, even with intensive use in a multi-shift system. 📍 ADDITIONAL INFORMATION: Condition: Used machine, in very good condition and fully functional. The machine is ready for on-site testing and immediate implementation in production.

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional Ndedpfspfcgaox Aa Rea - Disposal conveyor belts

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES Ndjdpfx Aajt U Izpe Rsa - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 - year 2007

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Nsdpfx Aaoyhduyo Rjda Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Nodpfx Aajztvy Rj Roda - Motor: 1.5 kW - Connection: 380 V

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Ndjdpfx Aasyyliks Roa Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Year of construction: 1985, condition: used, Mayrhofer tension trailer Year of manufacture: 1985 Track width: 90 cm with auxiliary trailer Nodozl N Ekopfx Aa Rsda immediately available – fully functional, but should be inspected/overhauled Location: Austria, near St. Pölten

Condition: good (used), functionality: fully functional, Crosscut saw KP-500 AUTOMAT input conveyor 5200mm output conveyor 2000mm motor 7.5 Kw Nsdett R Amjpfx Aa Roda

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Ndsdpfx Aaoxtxg Hj Rea Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2026, Cutting height 125x220 mm machine weight ab. 450 kg Ndodpfx Ajyk Idwea Roa Motor output 5,5 kW

Condition: new, Year of construction: 2026, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Ndedpfxjv Iqcms Aa Rsa Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Optimized unloading systems tailored to specific processing needs. Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Ndjdpfx Aaszfkwbo Rsa coolant lubrication

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: MLS 250 P TR, saw blade diameter: 200 mm, overall weight: 4,200 kg, cutting length (max.): 2,500 mm, Multi-blade saw for wood cutting by Mario Zaffaroni & Figli S.r.l. Details: 1) Element length: min. 330 mm, max. 2500 mm 2) Element thickness: min. 2 mm, max. 100 mm 3) Feed (working) speed: 3–45 m/min 4) Maximum cutting (milling) depth: 20 mm for saw blades with 200 mm diameter Ndjdoyk U Ebopfx Aa Rea 5) Total power: 55 kW 6) Main motor power: 45 kW 7) Weight: 4200 kg The machine is fully functional, requires no servicing. Very good condition.

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Ndedpfx Ajy Ef Hyoa Rja Cutting width 210 - 2500 mm Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location